用SVN import项目时候报错
svn: E175002: unknown host
svn: E175002: OPTIONS request failed on '/svn/Forestry'
svn: E175002: unknown host
svn: E175002: OPTIONS request failed on '/svn/Forestry'
fileserver: nodename nor servname provided, or not known
我没用代理 SVN的servers配置文件是
This file specifies server-specific parameters,
including HTTP proxy information, HTTP timeout settings,
and authentication settings.
###
The currently defined server options are:
http-proxy-host Proxy host for HTTP connection
http-proxy-port Port number of proxy host service
http-proxy-username Username for auth to proxy service
http-proxy-password Password for auth to proxy service
http-proxy-exceptions List of sites that do not use proxy
http-timeout Timeout for HTTP requests in seconds
http-compression Whether to compress HTTP requests
neon-debug-mask Debug mask for Neon HTTP library
http-auth-types Auth types to use for HTTP library
ssl-authority-files List of files, each of a trusted CA
ssl-trust-default-ca Trust the system 'default' CAs
ssl-client-cert-file PKCS#12 format client certificate file
ssl-client-cert-password Client Key password, if needed.
ssl-pkcs11-provider Name of PKCS#11 provider to use.
http-library Which library to use for http/https
connections (neon or serf)
store-passwords Specifies whether passwords used
to authenticate against a
Subversion server may be cached
to disk in any way.
store-plaintext-passwords Specifies whether passwords may
be cached on disk unencrypted.
store-ssl-client-cert-pp Specifies whether passphrase used
to authenticate against a client
certificate may be cached to disk
in any way
store-ssl-client-cert-pp-plaintext
Specifies whether client cert
passphrases may be cached on disk
unencrypted (i.e., as plaintext).
store-auth-creds Specifies whether any auth info
(passwords as well as server certs)
may be cached to disk.
username Specifies the default username.
###
Set store-passwords to 'no' to avoid storing passwords in the
auth/ area of your config directory. It defaults to 'yes',
but Subversion will never save your password to disk in
plaintext unless you tell it to.
Note that this option only prevents saving of new passwords;
it doesn't invalidate existing passwords. (To do that, remove
the cache files by hand as described in the Subversion book.)
###
Set store-plaintext-passwords to 'no' to avoid storing
passwords in unencrypted form in the auth/ area of your config
directory. Set it to 'yes' to allow Subversion to store
unencrypted passwords in the auth/ area. The default is
'ask', which means that Subversion will ask you before
saving a password to disk in unencrypted form. Note that
this option has no effect if either 'store-passwords' or
'store-auth-creds' is set to 'no'.
###
Set store-ssl-client-cert-pp to 'no' to avoid storing ssl
client certificate passphrases in the auth/ area of your
config directory. It defaults to 'yes', but Subversion will
never save your passphrase to disk in plaintext unless you tell
it to via 'store-ssl-client-cert-pp-plaintext' (see below).
###
Note store-ssl-client-cert-pp only prevents the saving of new
passphrases; it doesn't invalidate existing passphrases. To do
that, remove the cache files by hand as described in the
Subversion book at http://svnbook.red-bean.com/nightly/en/\\
svn.serverconfig.netmodel.html\
#svn.serverconfig.netmodel.credcache
###
Set store-ssl-client-cert-pp-plaintext to 'no' to avoid storing
passphrases in unencrypted form in the auth/ area of your
config directory. Set it to 'yes' to allow Subversion to
store unencrypted passphrases in the auth/ area. The default
is 'ask', which means that Subversion will prompt before
saving a passphrase to disk in unencrypted form. Note that
this option has no effect if either 'store-auth-creds' or
'store-ssl-client-cert-pp' is set to 'no'.
###
Set store-auth-creds to 'no' to avoid storing any Subversion
credentials in the auth/ area of your config directory.
Note that this includes SSL server certificates.
It defaults to 'yes'. Note that this option only prevents
saving of new credentials; it doesn't invalidate existing
caches. (To do that, remove the cache files by hand.)
###
HTTP timeouts, if given, are specified in seconds. A timeout
of 0, i.e. zero, causes a builtin default to be used.
###
The commented-out examples below are intended only to
demonstrate how to use this file; any resemblance to actual
servers, living or dead, is entirely coincidental.
In the 'groups' section, the URL of the repository you're
trying to access is matched against the patterns on the right.
If a match is found, the server options are taken from the
section with the corresponding name on the left.
[groups]
group1 = *.collab.net
othergroup = repository.blarggitywhoomph.com
thirdgroup = *.example.com
Information for the first group:
[group1]
http-proxy-host = proxy1.some-domain-name.com
http-proxy-port = 80
http-proxy-username = blah
http-proxy-password = doubleblah
http-timeout = 60
http-auth-types = basic;digest;negotiate
neon-debug-mask = 130
store-plaintext-passwords = no
username = harry
Information for the second group:
[othergroup]
http-proxy-host = proxy2.some-domain-name.com
http-proxy-port = 9000
No username and password for the proxy, so use the defaults below.
You can set default parameters in the 'global' section.
These parameters apply if no corresponding parameter is set in
a specifically matched group as shown above. Thus, if you go
through the same proxy server to reach every site on the
Internet, you probably just want to put that server's
information in the 'global' section and not bother with
'groups' or any other sections.
###
Most people might want to configure password caching
parameters here, but you can also configure them per server
group (per-group settings override global settings).
###
If you go through a proxy for all but a few sites, you can
list those exceptions under 'http-proxy-exceptions'. This only
overrides defaults, not explicitly matched server names.
###
'ssl-authority-files' is a semicolon-delimited list of files,
each pointing to a PEM-encoded Certificate Authority (CA)
SSL certificate. See details above for overriding security
due to SSL.
[global]
http-proxy-exceptions = *.exception.com, www.internal-site.org
http-proxy-host = defaultproxy.whatever.com
http-proxy-port = 7000
http-proxy-username = defaultusername
http-proxy-password = defaultpassword
http-compression = no
http-auth-types = basic;digest;negotiate
No http-timeout, so just use the builtin default.
No neon-debug-mask, so neon debugging is disabled.
ssl-authority-files = /path/to/CAcert.pem;/path/to/CAcert2.pem
#
