全志A31s的AP6210驱动报错

Question

报错信息如下，希望论坛的前辈指点一下
396825] dhd_bus_devreset: == WLAN ON ==
[ 96.397188] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 96.399852] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 96.400676] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 96.401370] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm40181a2.bin
[ 96.401948] dhd_conf_download_config: dhd_master_mode = 0
[ 96.401997] dhd_conf_download_config: pkt_filter_add[0][] = 120 0 0 12 0xFFFF000000000000000000FF00000000000000000000000000FF 0x0800000000000000000000110000000000000000000000000089
[ 96.402020] dhd_conf_download_config: pkt_filter_add[1][] = 121 0 0 0 0xFFFF 0x3333
[ 96.402081] Final fw_path=/system/vendor/modules/fw_bcm40181a2.bin
[ 96.402094] Final nv_path=/system/vendor/modules/nvram_ap6210.txt
[ 96.402107] Final conf_path=/system/vendor/modules/config.txt
[ 96.432921] NVRAM version: AP6210_NVRAM_V1.3_08182013
[ 96.433597] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 96.434179] dhd_bus_init: delay 100ms for BCM43362
[ 96.657226] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 96.657381] bcmsdh_set_drvdata: Enter
[ 96.657394] bcmsdh_set_irq: Flag = 1
[ 96.657527] dhd_conf_set_band: Set band 0
[ 96.661434] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=94:a1:a2:6a:3b:1d
[ 96.661452] dhd_conf_set_country: Set country CN, revision 0
[ 98.657220] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 53, RTO !!
[ 98.657245] [mmc]: *** sw_mci_request_done(L645): In data read operation
[ 98.657262] [mmc]: found data error, need to send stop command !!
[ 98.657279] [mmc]: *** sw_mci_send_manual_stop(L563): sdc 1 send stop command failed
[ 98.657333] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92
[ 98.657357] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 53, RTO !!
[ 98.657374] [mmc]: *** sw_mci_request_done(L645): In data read operation
[ 98.657388] [mmc]: found data error, need to send stop command !!
[ 98.657405] [mmc]: *** sw_mci_send_manual_stop(L563): sdc 1 send stop command failed
[ 98.657438] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92
[ 98.657461] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 53, RTO !!
[ 98.657478] [mmc]: *** sw_mci_request_done(L645): In data read operation
[ 98.657492] [mmc]: found data error, need to send stop command !!
[ 98.657508] [mmc]: *** sw_mci_send_manual_stop(L563): sdc 1 send stop command failed
[ 98.657541] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92
[ 98.657557] dhd_bus_rxctl: FAILEDstatusREAD, LINE 2650
[ 98.657570] dhd_bus_rxctl: resumed on timeout, INT status=0x00000000
[ 98.657599] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !!
[ 98.657625] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110
[ 98.658662] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !!
[ 98.658700] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110
[ 98.659736] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !!
[ 98.659769] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110
[ 98.659784] dhdsdio_membytes: window change failed
[ 98.659815] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !!
[ 98.659848] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 98.660882] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !!
[ 98.660914] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 98.661949] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !!
[ 98.661983] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110
[ 98.662035] dhd_conf_set_country: country code setting failed -110
[ 98.662054] dhd_conf_fix_country: get channels failed with -1
[ 98.662067] dhd_conf_fix_country: bcmerror=-1, # of channels 64
[ 98.662080] dhd_conf_set_country: Set country CN, revision 0
[ 98.662096] dhd_conf_set_country: country code setting failed -1
[ 98.662109] dhd_conf_set_country: Set country US, revision 0
[ 98.662124] dhd_conf_set_country: country code setting failed -1
[ 98.662140] dhd_conf_get_country: country code getting failed -1
[ 98.662156] dhd_conf_set_roam: Set roam_off 1
[ 98.662215] bcmsdh_set_irq: Flag = 0
[ 98.662267] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !!
[ 98.662297] sdioh_disable_func_intr: error for read SDIO_CCCR_IENx : 0xffffff92
[ 98.662324] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET
[ 98.662350] [ap6xxx]: succeed to set gpio ap6xxx_wl_regon to 0 !
[ 98.762834] [ap6xxx]: sdio wifi power state: off
[ 98.762850] =========== WLAN placed in RESET ========
[ 98.762862] wl_android_wifi_on: Failed

Answer 1

哥们 你那个问题解决了？目前我也遇到跟你一样的问题。402004128我的qq，可以一起研究下