编程介的小学生 2017-09-01 14:22 采纳率: 20.5%
浏览 706
已采纳

Robot Motion

A robot has been programmed to follow the instructions in its path. Instructions for the next direction the robot is to move are laid down in a grid. The possible instructions are

N north (up the page)
S south (down the page)
E east (to the right on the page)
W west (to the left on the page)

For example, suppose the robot starts on the north (top) side of Grid 1 and starts south (down). The path the robot follows is shown. The robot goes through 10 instructions in the grid before leaving the grid.

Compare what happens in Grid 2: the robot goes through 3 instructions only once, and then starts a loop through 8 instructions, and never exits.

You are to write a program that determines how long it takes a robot to get out of the grid or how the robot loops around.

Input

There will be one or more grids for robots to navigate. The data for each is in the following form. On the first line are three integers separated by blanks: the number of rows in the grid, the number of columns in the grid, and the number of the column in which the robot enters from the north. The possible entry columns are numbered starting with one at the left. Then come the rows of the direction instructions. Each grid will have at least one and at most 10 rows and columns of instructions. The lines of instructions contain only the characters N, S, E, or W with no blanks. The end of input is indicated by a row containing 0 0 0.

Output

For each grid in the input there is one line of output. Either the robot follows a certain number of instructions and exits the grid on any one the four sides or else the robot follows the instructions on a certain number of locations once, and then the instructions on some number of locations repeatedly. The sample input below corresponds to the two grids above and illustrates the two forms of output. The word "step" is always immediately followed by "(s)" whether or not the number before it is 1.

Sample Input

3 6 5
NEESWE
WWWESS
SNWWWW
4 5 1
SESWE
EESNW
NWEEN
EWSEN
0 0 0

Sample Output

10 step(s) to exit
3 step(s) before a loop of 8 step(s)

  • 写回答

1条回答

  • threenewbee 2017-09-16 15:52
    关注
    本回答被题主选为最佳回答 , 对您是否有帮助呢?
    评论

报告相同问题?

悬赏问题

  • ¥15 如何在scanpy上做差异基因和通路富集?
  • ¥20 关于#硬件工程#的问题,请各位专家解答!
  • ¥15 关于#matlab#的问题:期望的系统闭环传递函数为G(s)=wn^2/s^2+2¢wn+wn^2阻尼系数¢=0.707,使系统具有较小的超调量
  • ¥15 FLUENT如何实现在堆积颗粒的上表面加载高斯热源
  • ¥30 截图中的mathematics程序转换成matlab
  • ¥15 动力学代码报错,维度不匹配
  • ¥15 Power query添加列问题
  • ¥50 Kubernetes&Fission&Eleasticsearch
  • ¥15 報錯:Person is not mapped,如何解決?
  • ¥15 c++头文件不能识别CDialog