编程介的小学生 2017-09-13 00:10 采纳率: 20.5%
浏览 632
已采纳

Robot Motion

A robot has been programmed to follow the instructions in its path. Instructions for the next direction the robot is to move are laid down in a grid. The possible instructions are

N north (up the page)
S south (down the page)
E east (to the right on the page)
W west (to the left on the page)

For example, suppose the robot starts on the north (top) side of Grid 1 and starts south (down). The path the robot follows is shown. The robot goes through 10 instructions in the grid before leaving the grid.

Compare what happens in Grid 2: the robot goes through 3 instructions only once, and then starts a loop through 8 instructions, and never exits.

You are to write a program that determines how long it takes a robot to get out of the grid or how the robot loops around.

Input

There will be one or more grids for robots to navigate. The data for each is in the following form. On the first line are three integers separated by blanks: the number of rows in the grid, the number of columns in the grid, and the number of the column in which the robot enters from the north. The possible entry columns are numbered starting with one at the left. Then come the rows of the direction instructions. Each grid will have at least one and at most 10 rows and columns of instructions. The lines of instructions contain only the characters N, S, E, or W with no blanks. The end of input is indicated by a row containing 0 0 0.

Output

For each grid in the input there is one line of output. Either the robot follows a certain number of instructions and exits the grid on any one the four sides or else the robot follows the instructions on a certain number of locations once, and then the instructions on some number of locations repeatedly. The sample input below corresponds to the two grids above and illustrates the two forms of output. The word "step" is always immediately followed by "(s)" whether or not the number before it is 1.

Sample Input

3 6 5
NEESWE
WWWESS
SNWWWW
4 5 1
SESWE
EESNW
NWEEN
EWSEN
0 0 0

Sample Output

10 step(s) to exit
3 step(s) before a loop of 8 step(s)

  • 写回答

1条回答

  • devmiao 2017-09-13 00:45
    关注
    本回答被题主选为最佳回答 , 对您是否有帮助呢?
    评论

报告相同问题?

悬赏问题

  • ¥15 关于#matlab#的问题:在模糊控制器中选出线路信息,在simulink中根据线路信息生成速度时间目标曲线(初速度为20m/s,15秒后减为0的速度时间图像)我想问线路信息是什么
  • ¥15 banner广告展示设置多少时间不怎么会消耗用户价值
  • ¥16 mybatis的代理对象无法通过@Autowired装填
  • ¥15 可见光定位matlab仿真
  • ¥15 arduino 四自由度机械臂
  • ¥15 wordpress 产品图片 GIF 没法显示
  • ¥15 求三国群英传pl国战时间的修改方法
  • ¥15 matlab代码代写,需写出详细代码,代价私
  • ¥15 ROS系统搭建请教(跨境电商用途)
  • ¥15 AIC3204的示例代码有吗,想用AIC3204测量血氧,找不到相关的代码。