Firmware BIOS (ROM) corruption was detected on system ThinkSystem SR650 during POST 服务器报这个错误 应该怎么解决

目前服务器无法开机
烧录UEFI也无法正常工作
也无法自动修复UEFI
求各位大佬帮忙解决
图片说明

Csdn user default icon
上传中...
上传图片
插入图片
抄袭、复制答案,以达到刷声望分或其他目的的行为,在CSDN问答是严格禁止的,一经发现立刻封号。是时候展现真正的技术了!
其他相关推荐
nmap扫描结果显示Device type:"specialized|web|phone" 如果可信,这是一种什么样的服务器?
nmap扫描结果如下: ``` nmap -A -T4 *.*.*.* Starting Nmap 7.60 ( https://nmap.org ) at 2019-12-06 02:27 PST Nmap scan report for *.*.*.* (*.*.*.*) Host is up (0.0072s latency). Not shown: 997 filtered ports PORT STATE SERVICE VERSION 80/tcp open tcpwrapped 443/tcp open tcpwrapped 843/tcp open tcpwrapped Warning: OSScan results may be unreliable because we could not find at least 1 open and 1 closed port Device type: specialized|WAP|phone Running: iPXE 1.X, Linux 2.4.X|2.6.X, Sony Ericsson embedded OS CPE: cpe:/o:ipxe:ipxe:1.0.0%2b cpe:/o:linux:linux_kernel:2.4.20 cpe:/o:linux:linux_kernel:2.6.22 cpe:/h:sonyericsson:u8i_vivaz OS details: iPXE 1.0.0+, Tomato 1.28 (Linux 2.4.20), Tomato firmware (Linux 2.6.22), Sony Ericsson U8i Vivaz mobile phone TRACEROUTE (using port 80/tcp) HOP RTT ADDRESS 1 ... 30 OS and Service detection performed. Please report any incorrect results at https://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 66.64 seconds ``` 这是把网站挂在用手机搭建的服务器上了么? 新人不懂,大佬勿喷。
Thinkpad T410/T420 Debian 9 不扫描无线网
很多年前,经高人指点, 在笔记本上装Debian的wifi一直用下面的方法: 先在/etc/apt/sources.list 添加 non-free 然后用下面两句命令 apt update apt install firmware-iwlwifi 一直非常顺利,直到最近用Debian 9 安装两台T410/T420遇到了同样的问题,用原来的方法安装firmware-iwlwifi但发现不了无线网,在网上找了不少帖子,但还是不得要领,所以需要专家指点。 下面是目前的状况: uname -a ``` Linux ThinkPad 4.9.0-11-amd64 #1 SMP Debian 4.9.189-3+deb9u1 (2019-09-20) x86_64 GNU/Linux ``` lspci -knn | grep -iA2 net ``` 00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 06) Subsystem: Lenovo 82577LM Gigabit Network Connection [17aa:2153] Kernel driver in use: e1000e Kernel modules: e1000e -- 03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:4239] (rev 35) Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN [8086:1311] Kernel driver in use: iwlwifi ``` lshw -C net ``` *-network description: Ethernet interface product: 82577LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: enp0s25 version: 06 serial: 00:26:2d:fe:64:8d size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.12-1 ip=192.168.1.108 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f2600000-f261ffff memory:f2625000-f2625fff ioport:1820(size=32) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlp3s0 version: 35 serial: be:71:c0:02:27:55 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=4.9.0-11-amd64 firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11 resources: irq:28 memory:f2400000-f2401fff ``` dmesg|grep iwl ``` [ 10.747495] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 10.795505] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000-4.ucode [ 10.795652] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm [ 10.851389] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 10.851390] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 10.851391] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 10.851393] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74 [ 10.852583] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 10.940410] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 13.750028] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 23.111234] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 23.118141] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 23.118233] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 23.342117] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 23.349036] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 23.349127] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 23.446053] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 23.452963] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 23.453055] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 [ 23.678544] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 23.685461] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 23.685553] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1 ``` lshw -numeric -class network ``` *-network description: Ethernet interface product: 82577LM Gigabit Network Connection [8086:10EA] vendor: Intel Corporation [8086] physical id: 19 bus info: pci@0000:00:19.0 logical name: enp0s25 version: 06 serial: 00:26:2d:fe:64:8d size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.12-1 ip=192.168.1.108 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:24 memory:f2600000-f261ffff memory:f2625000-f2625fff ioport:1820(size=32) *-network description: Wireless interface product: Centrino Advanced-N 6200 [8086:4239] vendor: Intel Corporation [8086] physical id: 0 bus info: pci@0000:03:00.0 logical name: wlp3s0 version: 35 serial: ca:56:d9:d1:6c:73 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=4.9.0-11-amd64 firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11 resources: irq:27 memory:f2400000-f2401fff ``` nmcli dev status ``` DEVICE TYPE STATE CONNECTION wlp3s0 wifi disconnected -- enp0s25 ethernet unmanaged -- lo loopback unmanaged -- ``` iwconfig ``` lo no wireless extensions. enp0s25 no wireless extensions. wlp3s0 IEEE 802.11 ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off iw dev wlp3s0 info Interface wlp3s0 ifindex 3 wdev 0x1 addr ce:5a:75:cc:2e:f3 type managed wiphy 0 txpower 15.00 dBm ```
安装双系统出现Failed to load Intel firmware file
在Dell G7电脑上安装Windows和ubuntu双系统,在安装前会出现 Failed to load Intel firmware file一闪而过。但是可以正常安装成功! 安装成功后点击重启!页面就卡死黑屏并出现 Failed to load Intel firmware file ![图片说明](https://img-ask.csdn.net/upload/201906/27/1561597247_852585.jpg)
PX4文件夹下的firmware没有生成
首先,打开请打开【开始】-》【所有程序】-》【PX4 Toolchain】-》【PX4 Software Download】 工具下拉代码,此工具会一次下载Firmware项目和其子模块。按照这个步骤来的PX4文件夹下的firmware没有生成,这是怎么回事,求大神解我之惑
编译PX4时出现下面错误怎么办error: non-constant condition for static assertion
在Ubuntu16.04版本下,编译PX4时,总是出现下面的情况,不知道是什么原因,有哪位大神帮忙解答吗? u@ubuntu:~/src/Firmware$ make px4_fmu-v2_default -- PX4 config file: /home/hanlu/src/Firmware/boards/px4/fmu-v2/default.cmake -- PX4 config: px4_fmu-v2_default -- PX4 platform: nuttx -- PX4 lockstep: disabled -- PX4 version: v1.9.0-216-gbef7a9b -- cmake build type: MinSizeRel -- The CXX compiler identification is GNU 4.9.3 -- The C compiler identification is GNU 4.9.3 -- The ASM compiler identification is GNU -- Found assembler: /opt/gcc-arm-none-eabi-4_9-2015q3/bin/arm-none-eabi-gcc -- Check for working CXX compiler using: Ninja -- Check for working CXX compiler using: Ninja -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Check for working C compiler using: Ninja -- Check for working C compiler using: Ninja -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Found PythonInterp: /usr/bin/python (found version "2.7.12") -- Found PY_jinja2: /usr/local/lib/python2.7/dist-packages/Jinja2-2.7.3-py2.7.egg/jinja2 -- PX4 ECL: Very lightweight Estimation & Control Library v1.9.0-rc1-5-g54ac147 -- Building and including px4_io-v2_default -- ROMFS: px4fmu_common -- ROMFS: Adding rc.board_defaults -- ROMFS: Adding rc.board_sensors -- Configuring done -- Generating done -- Build files have been written to: /home/hanlu/src/Firmware/build/px4_fmu-v2_default [1/690] git submodule platforms/nuttx/NuttX/nuttx [4/690] git submodule platforms/nuttx/NuttX/apps [5/690] git submodule src/lib/ecl [10/690] git submodule src/drivers/gps/devices [16/690] git submodule mavlink/include/mavlink/v2.0 [24/690] Performing configure step for 'px4io_firmware' -- PX4 config file: /home/hanlu/src/Firmware/boards/px4/io-v2/default.cmake -- PX4 config: px4_io-v2_default -- PX4 platform: nuttx -- PX4 lockstep: disabled -- PX4 version: v1.9.0-216-gbef7a9b -- cmake build type: MinSizeRel -- The CXX compiler identification is GNU 4.9.3 -- The C compiler identification is GNU 4.9.3 -- The ASM compiler identification is GNU -- Found assembler: /opt/gcc-arm-none-eabi-4_9-2015q3/bin/arm-none-eabi-gcc -- Check for working CXX compiler using: Ninja -- Check for working CXX compiler using: Ninja -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Check for working C compiler using: Ninja -- Check for working C compiler using: Ninja -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Found PythonInterp: /usr/bin/python (found version "2.7.12") -- Found PY_jinja2: /usr/local/lib/python2.7/dist-packages/Jinja2-2.7.3-py2.7.egg/jinja2 -- PX4 ECL: Very lightweight Estimation & Control Library v1.9.0-rc1-5-g54ac147 -- Configuring done -- Generating done -- Build files have been written to: /home/hanlu/src/Firmware/build/px4_fmu-v2_default/external/Build/px4io_firmware [25/690] Performing build step for 'px4io_firmware' [1/200] git submodule platforms/nuttx/NuttX/nuttx [5/200] git submodule platforms/nuttx/NuttX/apps [39/200] Building CXX object src/platforms/common/CMakeFiles/px4_platform.dir/module.cpp.obj FAILED: /opt/gcc-arm-none-eabi-4_9-2015q3/bin/arm-none-eabi-g++ -DCONFIG_ARCH_BOARD_PX4_IO_V2 -D__CUSTOM_FILE_IO__ -D__DF_NUTTX -D__PX4_NUTTX -D__STDC_FORMAT_MACROS -isystem ../../../../../platforms/nuttx/NuttX/include/cxx -isystem NuttX/nuttx/include/cxx -isystem NuttX/nuttx/include -I../../../../../boards/px4/io-v2/src -I. -Isrc -Isrc/lib -Isrc/modules -I../../../../../src -I../../../../../src/include -I../../../../../src/lib -I../../../../../src/lib/DriverFramework/framework/include -I../../../../../src/lib/matrix -I../../../../../src/modules -I../../../../../src/platforms -I../../../../../src/platforms/common -INuttX/nuttx/arch/arm/src/armv7-m -INuttX/nuttx/arch/arm/src/chip -INuttX/nuttx/arch/arm/src/common -INuttX/apps/include -Iexternal/Install/include -mcpu=cortex-m3 -mthumb -Os -DNDEBUG -g -fdata-sections -ffunction-sections -fomit-frame-pointer -fno-signed-zeros -fno-trapping-math -freciprocal-math -fno-math-errno -fno-strict-aliasing -fvisibility=hidden -include visibility.h -Wall -Wextra -Werror -Warray-bounds -Wcast-align -Wdisabled-optimization -Wdouble-promotion -Wfatal-errors -Wfloat-equal -Wformat-security -Winit-self -Wlogical-op -Wpointer-arith -Wshadow -Wuninitialized -Wunknown-pragmas -Wunused-variable -Wno-implicit-fallthrough -Wno-missing-field-initializers -Wno-missing-include-dirs -Wno-unused-parameter -fdiagnostics-color=always -fno-builtin-printf -fno-strength-reduce -Wformat=1 -Wunused-but-set-variable -Wno-format-truncation -fcheck-new -fno-exceptions -fno-rtti -fno-threadsafe-statics -Wreorder -Wno-overloaded-virtual -D__STDC_VERSION__=199901L -nostdinc++ -std=gnu++11 -MMD -MT src/platforms/common/CMakeFiles/px4_platform.dir/module.cpp.obj -MF src/platforms/common/CMakeFiles/px4_platform.dir/module.cpp.obj.d -o src/platforms/common/CMakeFiles/px4_platform.dir/module.cpp.obj -c ../../../../../src/platforms/common/module.cpp In file included from ../../../../../src/platforms/px4_module.h:44:0, from ../../../../../src/platforms/common/module.cpp:43: ../../../../../src/platforms/px4_atomic.h: In instantiation of 'class px4::atomic<bool>': ../../../../../src/platforms/px4_module.h:421:42: required from here ../../../../../src/platforms/px4_atomic.h:72:2: error: non-constant condition for static assertion static_assert(__atomic_always_lock_free(sizeof(T), 0), "atomic is not lock-free for the given type T"); ^ compilation terminated due to -Wfatal-errors. [39/200] Building CXX object msg/CMakeFiles/uorb_msgs.dir/topics_sources/gps_inject_data.cpp.obj ninja: build stopped: subcommand failed. [108/690] Building CXX object msg/CMakeFiles/uorb_msgs.dir/topics_sources/rc_parameter_map.cpp.obj FAILED: cd /home/hanlu/src/Firmware/build/px4_fmu-v2_default/external/Build/px4io_firmware && /usr/bin/cmake --build . && /usr/bin/cmake -E touch /home/hanlu/src/Firmware/build/px4_fmu-v2_default/external/Stamp/px4io_firmware/px4io_firmware-build [108/690] Building CXX object msg/CMakeFiles/uorb_msgs.dir/topics_sources/rc_parameter_map.cpp.obj ninja: build stopped: subcommand failed. Makefile:193: recipe for target 'px4_fmu-v2_default' failed make: *** [px4_fmu-v2_default] Error 1
ubuntu16.04下载PX4出现问题如下:
:~/src$ git clone https://github.com/PX4/Firmware.git 正克隆到 'Firmware'... remote: Enumerating objects: 44, done. remote: Counting objects: 100% (44/44), done. remote: Compressing objects: 100% (34/34), done. error: RPC failed; curl 56 GnuTLS recv error (-54): Error in the pull function. fatal: The remote end hung up unexpectedly fatal: 过早的文件结束符(EOF) fatal: index-pack failed
编译内核是时make install除错
Error! Bad return status for module build on kernel: 3.19.3 (x86_64) Consult /var/lib/dkms/vboxhost/4.3.26/build/make.log for more information. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.19.3 /boot/vmlinuz-3.19.3 update-initramfs: Generating /boot/initrd.img-3.19.3 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-1.fw for module r8169
MTK7621+QCA9880+AR9580刷Openwrt 一些问题请教大家
在下是来向大家请教问题的,第一次遇上这种“杂交”配置,在上手这块板子的时候遇到一些问题,想跟大家请教探讨一下。 遇到的问题是,刷了openwrt之后,没有5G。 先介绍下环境,用的是openwrt15.05的版本 make menuconfig Target System (Ralink RT288x/RT3xxx) Subtarget (MT7621 based boards) Target Profile (PBR-M1 Device) -*- ath10k-firmware-qca988x.............. ath10k firmware for QCA988x devices -*- kmod-ath...................................... Atheros common driver part <*> kmod-ath10k...................... Atheros 802.11ac wireless cards support <*> kmod-ath9k.................... Atheros 802.11n PCI wireless cards support -*- kmod-ath9k-common 2.4G是AR9580 5G是QCA9880 MTK7621做主CPU 那么问题来了,选择地Subtarget是7621,../ramips/base-file/XXX, 这些编译出来的ath10k的脚本都是ramips的,5G模块用的是QCA9880,应该对应ar71xx的脚本吧。 于是做了一下尝试: 1.将./target/linux/ar71xx 下的脚本移到ramips目录下, 在11-ath10k-caldata 中添加 "ath10k/cal-pci-0000:01:00.0.bin") case $board in pbr-m1) ath10kcal_extract "EEPROM" 32768 2047 ;; 然后编译. 2.将../QCA988X/hw2.0/下的 board.bin firmware-5.bin 直接拷贝到路由器。 编译通过,最后烧录到路由器上问题没有得到解决。 后面仔细看了ramips/../hotplug.d/ 和 ../lib/preinit/* 这些脚本, 还是不知道错在哪里。 思路有限,也怕误入歧途,所以来请教下 广大openwrt玩家,请大家指教。
makefile中怎么定义下载代码
各位大神好,在这里请教各位一个关于makefile的问题,先行谢过。 我目的是想编译fastboot源码,需要一些依赖文件,然后想在在makefile中指出下载的地址,编译时候 自动下载其余代码。 手动下载代码是通过: git clone -b android-4.4_r1.2 https://android.googlesource.com/platform/system/core 看了关于http://my.oschina.net/hevakelcj/blog/411942的讲解,还是有一些不懂。 翻看其他makefile PKG_NAME:=ath10k-firmware PKG_SOURCE_VERSION:=77f72b5f7dd940386d9e619a17904987759b7186 PKG_VERSION:=2014-11-13-$(PKG_SOURCE_VERSION) PKG_RELEASE:=1 PKG_SOURCE_PROTO:=git PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) PKG_SOURCE_URL:=https://github.com/kvalo/ath10k-firmware.git define Download/ath10k-firmware-qca988x URL:=https://www.codeaurora.org/cgit/quic/qsdk/oss/firmware/ath10k-firmware/plain/10.2.4/ FILE:=$(QCA988X_FIRMWARE_FILE) 这里有疑问了,这里面需要 指出正确的PKG_SOURCE_VERSION PKG_VERSION PKG_SOURCE_SUBDIR 吗?因为我的PKG_NAME 不是这个android-4.4_r1.2。 还请各位指点迷津
全志A31s的AP6210驱动报错
报错信息如下,希望论坛的前辈指点一下 396825] dhd_bus_devreset: == WLAN ON == <4>[ 96.397188] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362 <4>[ 96.399852] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9 <4>[ 96.400676] DHD: dongle ram size is set to 245760(orig 245760) at 0x0 <4>[ 96.401370] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm40181a2.bin <4>[ 96.401948] dhd_conf_download_config: dhd_master_mode = 0 <4>[ 96.401997] dhd_conf_download_config: pkt_filter_add[0][] = 120 0 0 12 0xFFFF000000000000000000FF00000000000000000000000000FF 0x0800000000000000000000110000000000000000000000000089 <4>[ 96.402020] dhd_conf_download_config: pkt_filter_add[1][] = 121 0 0 0 0xFFFF 0x3333 <4>[ 96.402081] Final fw_path=/system/vendor/modules/fw_bcm40181a2.bin <4>[ 96.402094] Final nv_path=/system/vendor/modules/nvram_ap6210.txt <4>[ 96.402107] Final conf_path=/system/vendor/modules/config.txt <4>[ 96.432921] NVRAM version: AP6210_NVRAM_V1.3_08182013 <4>[ 96.433597] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. <4>[ 96.434179] dhd_bus_init: delay 100ms for BCM43362 <4>[ 96.657226] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) <4>[ 96.657381] bcmsdh_set_drvdata: Enter <4>[ 96.657394] bcmsdh_set_irq: Flag = 1 <4>[ 96.657527] dhd_conf_set_band: Set band 0 <4>[ 96.661434] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=94:a1:a2:6a:3b:1d <4>[ 96.661452] dhd_conf_set_country: Set country CN, revision 0 <4>[ 98.657220] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 53, RTO !! <4>[ 98.657245] [mmc]: *** sw_mci_request_done(L645): In data read operation <4>[ 98.657262] [mmc]: found data error, need to send stop command !! <4>[ 98.657279] [mmc]: *** sw_mci_send_manual_stop(L563): sdc 1 send stop command failed <4>[ 98.657333] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92 <4>[ 98.657357] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 53, RTO !! <4>[ 98.657374] [mmc]: *** sw_mci_request_done(L645): In data read operation <4>[ 98.657388] [mmc]: found data error, need to send stop command !! <4>[ 98.657405] [mmc]: *** sw_mci_send_manual_stop(L563): sdc 1 send stop command failed <4>[ 98.657438] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92 <4>[ 98.657461] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 53, RTO !! <4>[ 98.657478] [mmc]: *** sw_mci_request_done(L645): In data read operation <4>[ 98.657492] [mmc]: found data error, need to send stop command !! <4>[ 98.657508] [mmc]: *** sw_mci_send_manual_stop(L563): sdc 1 send stop command failed <4>[ 98.657541] bcmsdh_sdmmc: Failed to Read word, Err: 0xffffff92 <4>[ 98.657557] dhd_bus_rxctl: FAILEDstatusREAD, LINE 2650 <4>[ 98.657570] dhd_bus_rxctl: resumed on timeout, INT status=0x00000000 <4>[ 98.657599] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !! <4>[ 98.657625] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110 <4>[ 98.658662] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !! <4>[ 98.658700] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110 <4>[ 98.659736] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !! <4>[ 98.659769] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=80, Err: -110 <4>[ 98.659784] dhdsdio_membytes: window change failed <4>[ 98.659815] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !! <4>[ 98.659848] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 <4>[ 98.660882] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !! <4>[ 98.660914] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 <4>[ 98.661949] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !! <4>[ 98.661983] bcmsdh_sdmmc: Failed to Write byte F1:@0x1000a=00, Err: -110 <4>[ 98.662035] dhd_conf_set_country: country code setting failed -110 <4>[ 98.662054] dhd_conf_fix_country: get channels failed with -1 <4>[ 98.662067] dhd_conf_fix_country: bcmerror=-1, # of channels 64 <4>[ 98.662080] dhd_conf_set_country: Set country CN, revision 0 <4>[ 98.662096] dhd_conf_set_country: country code setting failed -1 <4>[ 98.662109] dhd_conf_set_country: Set country US, revision 0 <4>[ 98.662124] dhd_conf_set_country: country code setting failed -1 <4>[ 98.662140] dhd_conf_get_country: country code getting failed -1 <4>[ 98.662156] dhd_conf_set_roam: Set roam_off 1 <4>[ 98.662215] bcmsdh_set_irq: Flag = 0 <4>[ 98.662267] [mmc]: *** sw_mci_dump_errinfo(L592): smc 1 err, cmd 52, RTO !! <4>[ 98.662297] sdioh_disable_func_intr: error for read SDIO_CCCR_IENx : 0xffffff92 <4>[ 98.662324] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET <4>[ 98.662350] [ap6xxx]: succeed to set gpio ap6xxx_wl_regon to 0 ! <4>[ 98.762834] [ap6xxx]: sdio wifi power state: off <4>[ 98.762850] =========== WLAN placed in RESET ======== <4>[ 98.762862] wl_android_wifi_on: Failed
PX4编译问题,编译出错
尝试PX4编译时出错,error详见下图![图片说明](https://img-ask.csdn.net/upload/201904/14/1555209635_624299.png) 之前一直有GCC和G++的问题,安装了最新版本的GCC工具链后之前的问题解决了,产生了新的问题 具体代码: [2/655] Generating nuttx/include/nuttx/version.h, nuttx/include/nuttx/config.h FAILED: cd /home/hu/src/Firmware/build/px4_fmu-v2_default/NuttX/nuttx && make --quiet --no-print-directory CONFIG_ARCH_BOARD_CUSTOM=y context > nuttx_context.log /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/bin/ld: /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/lib/libc.a(lib_a-exit.o): in function `exit': exit.c:(.text.exit+0x2c): undefined reference to `_exit' /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/bin/ld: /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/lib/libc.a(lib_a-fstatr.o): in function `_fstat_r': fstatr.c:(.text._fstat_r+0x20): undefined reference to `_fstat' /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/bin/ld: /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/lib/libc.a(lib_a-openr.o): in function `_open_r': openr.c:(.text._open_r+0x24): undefined reference to `_open' /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/bin/ld: /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/lib/libc.a(lib_a-sbrkr.o): in function `_sbrk_r': sbrkr.c:(.text._sbrk_r+0x18): undefined reference to `_sbrk' /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/bin/ld: /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/lib/libc.a(lib_a-writer.o): in function `_write_r': writer.c:(.text._write_r+0x24): undefined reference to `_write' /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/bin/ld: /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/lib/libc.a(lib_a-closer.o): in function `_close_r': closer.c:(.text._close_r+0x18): undefined reference to `_close' /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/bin/ld: /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/lib/libc.a(lib_a-isattyr.o): in function `_isatty_r': isattyr.c:(.text._isatty_r+0x18): undefined reference to `_isatty' /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/bin/ld: /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/lib/libc.a(lib_a-lseekr.o): in function `_lseek_r': lseekr.c:(.text._lseek_r+0x24): undefined reference to `_lseek' /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/bin/ld: /usr/bin/gcc-arm-none-eabi-8-2018-q4-major/bin/../lib/gcc/arm-none-eabi/8.2.1/../../../../arm-none-eabi/lib/libc.a(lib_a-readr.o): in function `_read_r': readr.c:(.text._read_r+0x24): undefined reference to `_read' collect2: error: ld returned 1 exit status make[3]: *** [mkconfig] Error 1 make[2]: *** [tools/mkconfig] Error 2 FAILED: cd /home/hu/src/Firmware/build/px4_fmu-v2_default/external/Build/px4io_firmware && /usr/bin/cmake --build . && /usr/bin/cmake -E touch /home/hu/src/Firmware/build/px4_fmu-v2_default/external/Stamp/px4io_firmware/px4io_firmware-build ninja: build stopped: subcommand failed. Makefile:190: recipe for target 'px4_fmu-v2_default' failed make[1]: *** [px4_fmu-v2_default] Error 1 make[1]: Leaving directory '/home/hu/src/Firmware' Makefile:212: recipe for target 'px4fmu-v2_default' failed make: *** [px4fmu-v2_default] Error 2
u-boot编译产生的.bin文件在哪
在编译u-boot后生成了.map/.img和uboot文件但是找不到u-boot.bin文件,最后显示:Notes:Uboot firmware in flash is uboot.img NOT uboot.bin。求问.bin文件在哪
Linux内核调用do_filp_open,返回0xfffffffe
大家好: 最近在调试Realtek的8188cu的USB无线网卡,加载驱动时需要一个Firmware,我看了代码,驱动会在指定的几个目录寻找。 <0>[path_openat][2931] ./lib/firmware/rtlwifi/rtl8192cufw.bin 而且我把rtl8192cufw.bin放在了根目录下面的/lib/firmware/rtlwifi/rtl8192cufw.bin 但是do_filp_open调用的path_openat总是返回0xFFFFFFFE回来,导致IS_ERR(file)一直为真。 想请问一下CSDN的大神Linux内核工作时的"./"是在哪个目录?除了文件不存在意外还有没有什么情况会导致path_openat返回0xFFFFFFFE?
在Ubuntu中使用Jlink出现问题
确认J-Link在windows下工作良好能运行JLinkExe和JLinkGDBsever,然后在新的ubuntu发行版上运行./JLinkExe会出现 root@zullge-virtual-machine:/opt/SEGGER/JLink# ./JLinkExe SEGGER J-Link Commander V4.94h ('?' for help) Compiled Nov 28 2014 17:54:18 Can not connect to J-Link via USB. J-Link> 查看USB挂载情况如下 root@zullge-virtual-machine:/opt/SEGGER/JLink# lsusb Bus 002 Device 005: ID 1366:0102 SEGGER Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 可以看到segger Jlink 已经挂载 。 使用Jlink的命令帮助: J-Link>ShowEmuList J-Link[0]: Connection: USB, Serial number: 123456, ProductName: J-Link J-Link> 于是看到JLINK的USB串口号为123456 继续使用USB命令如下: J-Link>usb 123456 Connecting to J-Link via USB (Port: 123456) Emulator with USB serial number 123456 selected. DLL version V4.94h, compiled Nov 28 2014 17:54:16 Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46 Hardware: V8.00 S/N: 17935099 Feature(s): RDI,FlashDL,FlashBP,JFlash VTarget = 3.325V Info: TotalIRLen = 9, IRPrint = 0x0011 Found 2 JTAG devices, Total IRLen = 5: #0 Id: 0x2B900F0F, IRLen: 04, IRPrint: 0x0, ARM ETB #1 Id: 0x07B76F0F, IRLen: 05, IRPrint: 0x1, ARM1176 Core ARM11 identified. Target interface speed: 100 kHz J-Link> 发现这个我在win7下直接运行JLinkExe的如果一致说明在Ubuntu下是已经Jlink连接到我的6410目标板了。 但为什么我在Ubuntu下直接运行./JLinkExe 会连不上,运行./JLinkGDBsever 出现如下结果: SEGGER J-Link GDB Server V4.94h Command Line Version JLinkARM.dll V4.94h (DLL compiled Nov 28 2014 17:54:16) -----GDB Server start settings----- GDBInit file: none GDB Server Listening port: 2331 SWO raw output listening port: 2332 Terminal I/O port: 2333 Accept remote connection: yes Generate logfile: off Verify download: off Init regs on start: on Silent mode: off Single run mode: off Target connection timeout: 5000 ms ------J-Link related settings------ J-Link Host interface: USB J-Link script: none J-Link settings file: none ------Target related settings------ Target device: unspecified Target interface: JTAG Target interface speed: 1000kHz Target endian: little Connecting to J-Link... Connecting to J-Link failed. Connected correctly? GDBServer will be closed... Shutting down... GDB Server closed due to a J-Link connection failure 现在继续要在ubuntu下能够启动GDB Server啊,各位大神求助
ADUC7023使用I2C下载Firmware的问题
官方文档说明,可以使用P0.4/P0.5进行I2C下载。但在具体实现中,发现:当MCU进入I2C下载模式后,通过P0.4/P0.5进行I2C通信,从机没有响应。从机地址:0x04,数据:0x08
openwrt uboot移植,uboot跑起来后读取文件出错
我用的是mw300r的板子,然后想把8Mflash换成4Mflash,但是怎么组都出错,求解答啊。急!!或者哪位大神知道firmware和art文件在falsh里面的存放位置不。下面出错的情况截图 ![![![图片说明](https://img-ask.csdn.net/upload/201506/10/1433903777_927439.png)图片说明](https://img-ask.csdn.net/upload/201506/10/1433903764_410472.png)图片说明](https://img-ask.csdn.net/upload/201506/10/1433903799_153085.png)
linux如何安装无线驱动?
笔记本型号:dell 5439 无线网卡型号:Intel® 无线-N 7260 BGN @ 2.4GHz 操作系统:elementary(基于ubuntu,而且在ubuntu下无线是可用的) 64位 我在网上下载到了无线网卡的驱动http://www.intel.com/support/cn/wireless/wlan/sb/cs-034398.htm, 按照提示,cp iwlwifi-xxx.ucode /lib/firmware 我以为这样就可以了,但是根本没用,求高手解答,谢谢!
linux sparc 架构PCI设备能找到设备,但无法分配可用资源。
[ 0.000000] ###INFO: ***************Welcom to MyKernel*************** [ 0.000000] ###INFO: Build on Sep 5 2014, 04:56:28 [ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 1.0.0 2013/06/08 09:37' [ 0.000000] PROMLIB: Root node compatible: sun4v [ 0.000000] Linux version 2.6.32.20 (root@localhost.localdomain) (gcc version 4.4.3 20100121 (Red Hat 4.4.3-3) (GCC) ) #8 SMP Fri Sep 5 04:56:43 CST 2014 [ 0.000000] bootconsole [btext0] enabled [ 0.000000] ARCH: SUN4V [ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image. [ 0.000000] Remapping the kernel... done. [ 0.000000] OF stdout device is: /pci@0/pci@0/display@0 [ 0.000000] PROM: Built device tree with 151492 bytes of memory. [ 0.000000] MDESC: Size is 34720 bytes. [ 0.000000] PLATFORM: banner-name [YH FT-1000 Platform] [ 0.000000] PLATFORM: name [YH FT-1000 Platform] [ 0.000000] PLATFORM: hostid [83f9edf0] [ 0.000000] PLATFORM: serial# [00ab4130] [ 0.000000] PLATFORM: stick-frequency [3b9aca00] [ 0.000000] PLATFORM: mac-address [144ff9edf0] [ 0.000000] PLATFORM: watchdog-resolution [1000 ms] [ 0.000000] PLATFORM: watchdog-max-timeout [31536000000 ms] [ 0.000000] PLATFORM: max-cpus [256] [ 0.000000] Top of RAM: 0xff82e000, Total RAM: 0xfb3c6000 [ 0.000000] Memory hole size: 68MB [ 0.000000] [0000010000000000-fffff80005000000] page_structs=131072 node=0 entry=0/0 [ 0.000000] [0000010000000000-fffff80005400000] page_structs=131072 node=0 entry=1/0 [ 0.000000] [0000010000800000-fffff80005800000] page_structs=131072 node=0 entry=2/0 [ 0.000000] [0000010000800000-fffff80005c00000] page_structs=131072 node=0 entry=3/0 [ 0.000000] [0000010001000000-fffff80006000000] page_structs=131072 node=0 entry=4/0 [ 0.000000] [0000010001000000-fffff80006400000] page_structs=131072 node=0 entry=5/0 [ 0.000000] [0000010001800000-fffff80006800000] page_structs=131072 node=0 entry=6/0 [ 0.000000] [0000010001800000-fffff80006c00000] page_structs=131072 node=0 entry=7/0 [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00002200 -> 0x0007fc17 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00002200 -> 0x0007fbd2 [ 0.000000] 0: 0x0007fbd8 -> 0x0007fbe8 [ 0.000000] 0: 0x0007fc16 -> 0x0007fc17 [ 0.000000] On node 0 totalpages: 514531 [ 0.000000] Normal zone: 4021 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 510510 pages, LIFO batch:15 [ 0.000000] Booting Linux... [ 0.000000] PERCPU: Embedded 7 pages/cpu @fffff80007000000 s25920 r8192 d23232 u65536 [ 0.000000] pcpu-alloc: s25920 r8192 d23232 u65536 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510510 [ 0.000000] Kernel command line: root=/dev/mapper/VolGroup-lv_root ro LANG=zh_CN.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet selinux=0 [ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 9, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 8, 2097152 bytes) [ 0.000000] Memory: 4048080k available (4048k kernel code, 2832k data, 232k init) [fffff80000000000,00000000ff82e000] [ 0.000000] SLUB: Genslabs=14, HWalign=32, Order=0-3, MinObjects=0, CPUs=64, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:255 [ 0.000000] clocksource: mult[10000] shift[16] [ 0.000000] clockevent: mult[80000000] shift[31] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 40.725938] Calibrating delay using timer specific routine.. 2002.12 BogoMIPS (lpj=10010649) [ 40.726151] Mount-cache hash table entries: 512 [ 40.742607] Brought up 32 CPUs [ 40.748046] ldc.c:v1.1 (July 22, 2008) [ 40.749322] NET: Registered protocol family 16 [ 40.781504] VIO: Adding device channel-devices, parent = NO [ 40.784457] FeiTeng board init [ 40.784515] the processor type:FT1000a, board:ft1000a_gw,FT USER VERSION: |渄??-#M7+酾h [ 40.784900] Testing NMI watchdog ... OK. [ 40.984975] Performance events: Supported PMU type is 'FT' [ 41.001527] pci_sun4v: Registered hvapi major[1] minor[0] [ 41.001913] /pci@0: SUN4V PCI Bus Module [ 41.001928] /pci@0: On NUMA node -1 [ 41.001944] /pci@0: PCI IO[c810000000] MEM[ca00000000] [ 41.062546] /pci@0: Imported 19 TSB entries from OBP [ 41.064105] /pci@0: MSI Queue first[0] num[36] count[128] devino[0x18] [ 41.064125] /pci@0: MSI first[0] num[256] mask[0xff] width[32] [ 41.064143] /pci@0: MSI addr32[0x7fff0000:0x10000] addr64[0x3ffff0000:0x10000] [ 41.064160] /pci@0: MSI queues at RA [00000000fab00000] [ 41.064179] PCI: Scanning PBM /pci@0 [ 41.064592] PCI: scan_bus[/pci@0] bus no 0 [ 41.064607] * /pci@0/pci@0 [ 41.064688] create device, devfn: 0, type: pciex [ 41.064737] class: 0x60400 device name: 0000:00:00.0 [ 41.064757] parse addresses (20 bytes) @ fffff800ff7bab40 [ 41.064774] start: ca00100000, end: ca0010ffff, i: 38 [ 41.064786] adding to system ... [ 41.064831] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.064872] pci 0000:00:00.0: supports D1 [ 41.064889] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 41.064908] pci 0000:00:00.0: PME# disabled [ 41.064929] PCI: dev header type: 1 [ 41.064940] of_scan_pci_bridge(/pci@0/pci@0) [ 41.064966] bus name: PCI Bus 0000:01 [ 41.064979] PCI: scan_bus[/pci@0/pci@0] bus no 1 [ 41.064992] * /pci@0/pci@0/display@0 [ 41.065042] create device, devfn: 0, type: display [ 41.065089] class: 0x30000 device name: 0000:01:00.0 [ 41.065106] parse addresses (80 bytes) @ fffff800ff7b9680 [ 41.065123] start: ca10000000, end: ca1fffffff, i: 10 [ 41.065138] start: ca00200000, end: ca0021ffff, i: 18 [ 41.065153] start: c810001000, end: c8100010ff, i: 20 [ 41.065168] start: ca00220000, end: ca0023ffff, i: 30 [ 41.065180] adding to system ... [ 41.065212] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.065261] pci 0000:01:00.0: supports D1 D2 [ 41.065288] PCI: dev header type: 0 [ 41.065300] * /pci@0/pci@1 [ 41.065349] create device, devfn: 8, type: pciex [ 41.065391] class: 0x60400 device name: 0000:00:01.0 [ 41.065412] parse addresses (20 bytes) @ fffff800ff7b8800 [ 41.065428] start: ca00110000, end: ca0011ffff, i: 38 [ 41.065442] adding to system ... [ 41.065472] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.065509] pci 0000:00:01.0: supports D1 [ 41.065524] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 41.065542] pci 0000:00:01.0: PME# disabled [ 41.065562] PCI: dev header type: 1 [ 41.065572] of_scan_pci_bridge(/pci@0/pci@1) [ 41.065596] bus name: PCI Bus 0000:02 [ 41.065609] PCI: scan_bus[/pci@0/pci@1] bus no 2 [ 41.065622] * /pci@0/pci@1/pci@0 [ 41.065672] create device, devfn: 0, type: pciex [ 41.065721] class: 0x60400 device name: 0000:02:00.0 [ 41.065738] parse addresses (20 bytes) @ fffff800ff7b7800 [ 41.065754] start: ca20000000, end: ca2001ffff, i: 10 [ 41.065766] adding to system ... [ 41.065796] pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.065858] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 41.065877] pci 0000:02:00.0: PME# disabled [ 41.065909] PCI: dev header type: 1 [ 41.065920] of_scan_pci_bridge(/pci@0/pci@1/pci@0) [ 41.065945] bus name: PCI Bus 0000:03 [ 41.065958] PCI: scan_bus[/pci@0/pci@1/pci@0] bus no 3 [ 41.065971] * /pci@0/pci@1/pci@0/pci@1 [ 41.066022] create device, devfn: 8, type: pciex [ 41.066071] class: 0x60400 device name: 0000:03:01.0 [ 41.066086] adding to system ... [ 41.066116] pci 0000:03:01.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.066178] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 41.066197] pci 0000:03:01.0: PME# disabled [ 41.066229] PCI: dev header type: 1 [ 41.066241] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@1) [ 41.066268] bus name: PCI Bus 0000:04 [ 41.066281] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@1] bus no 4 [ 41.066295] * /pci@0/pci@1/pci@0/pci@1/ethernet@0 [ 41.066348] create device, devfn: 0, type: [ 41.066399] class: 0x20000 device name: 0000:04:00.0 [ 41.066417] parse addresses (80 bytes) @ fffff800ff7b5740 [ 41.066435] start: ca20100000, end: ca2011ffff, i: 10 [ 41.066450] start: ca20120000, end: ca2013ffff, i: 14 [ 41.066467] start: c810002000, end: c81000201f, i: 18 [ 41.066482] start: ca20140000, end: ca2015ffff, i: 30 [ 41.066494] adding to system ... [ 41.066525] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.066592] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 41.066612] pci 0000:04:00.0: PME# disabled [ 41.066643] PCI: dev header type: 0 [ 41.066655] * /pci@0/pci@1/pci@0/pci@1/ethernet@0,1 [ 41.066709] create device, devfn: 1, type: [ 41.066760] class: 0x20000 device name: 0000:04:00.1 [ 41.066777] parse addresses (80 bytes) @ fffff800ff7b4a80 [ 41.066793] start: ca20160000, end: ca2017ffff, i: 10 [ 41.066809] start: ca20180000, end: ca2019ffff, i: 14 [ 41.066824] start: c810002020, end: c81000203f, i: 18 [ 41.066839] start: ca201a0000, end: ca201bffff, i: 30 [ 41.066851] adding to system ... [ 41.066881] pci 0000:04:00.1: calling quirk_resource_alignment+0x0/0x1a4 [ 41.066948] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 41.066967] pci 0000:04:00.1: PME# disabled [ 41.066999] PCI: dev header type: 0 [ 41.067011] * /pci@0/pci@1/pci@0/pci@4 [ 41.067063] create device, devfn: 20, type: pciex [ 41.067113] class: 0x60400 device name: 0000:03:04.0 [ 41.067127] adding to system ... [ 41.067157] pci 0000:03:04.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.067219] pci 0000:03:04.0: PME# supported from D0 D3hot D3cold [ 41.067238] pci 0000:03:04.0: PME# disabled [ 41.067270] PCI: dev header type: 1 [ 41.067281] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4) [ 41.067306] bus name: PCI Bus 0000:05 [ 41.067319] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4] bus no 5 [ 41.067334] * /pci@0/pci@1/pci@0/pci@4/pci@0 [ 41.067387] create device, devfn: 0, type: pciex [ 41.067439] class: 0x60400 device name: 0000:05:00.0 [ 41.067455] parse addresses (20 bytes) @ fffff800ff7b2d40 [ 41.067473] start: ca20200000, end: ca2021ffff, i: 10 [ 41.067485] adding to system ... [ 41.067517] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.067586] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 41.067606] pci 0000:05:00.0: PME# disabled [ 41.067640] PCI: dev header type: 1 [ 41.067651] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0) [ 41.067677] bus name: PCI Bus 0000:06 [ 41.067690] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0] bus no 6 [ 41.067705] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@1 [ 41.067760] create device, devfn: 8, type: pciex [ 41.067812] class: 0x60400 device name: 0000:06:01.0 [ 41.067826] adding to system ... [ 41.067856] pci 0000:06:01.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.067924] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold [ 41.067943] pci 0000:06:01.0: PME# disabled [ 41.067978] PCI: dev header type: 1 [ 41.067989] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@1) [ 41.068015] bus name: PCI Bus 0000:07 [ 41.068029] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@1] bus no 7 [ 41.068045] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@3 [ 41.068100] create device, devfn: 18, type: pciex [ 41.068153] class: 0x60400 device name: 0000:06:03.0 [ 41.068167] adding to system ... [ 41.068197] pci 0000:06:03.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.068265] pci 0000:06:03.0: PME# supported from D0 D3hot D3cold [ 41.068285] pci 0000:06:03.0: PME# disabled [ 41.068319] PCI: dev header type: 1 [ 41.068330] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@3) [ 41.068357] bus name: PCI Bus 0000:08 [ 41.068370] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@3] bus no 8 [ 41.068387] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@a [ 41.068442] create device, devfn: 50, type: pciex [ 41.068494] class: 0x60400 device name: 0000:06:0a.0 [ 41.068508] adding to system ... [ 41.068539] pci 0000:06:0a.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.068610] pci 0000:06:0a.0: PME# supported from D0 D3hot D3cold [ 41.068631] pci 0000:06:0a.0: PME# disabled [ 41.068666] PCI: dev header type: 1 [ 41.068678] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@a) [ 41.068703] bus name: PCI Bus 0000:09 [ 41.068717] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@a] bus no 9 [ 41.068733] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b [ 41.068789] create device, devfn: 58, type: pciex [ 41.068842] class: 0x60400 device name: 0000:06:0b.0 [ 41.068856] adding to system ... [ 41.068886] pci 0000:06:0b.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.068954] pci 0000:06:0b.0: PME# supported from D0 D3hot D3cold [ 41.068974] pci 0000:06:0b.0: PME# disabled [ 41.069008] PCI: dev header type: 1 [ 41.069019] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@b) [ 41.069046] bus name: PCI Bus 0000:0a [ 41.069059] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@b] bus no 10 [ 41.069075] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0 [ 41.069132] create device, devfn: 0, type: ohci [ 41.069192] class: 0xc0310 device name: 0000:0a:00.0 [ 41.069209] parse addresses (20 bytes) @ fffff800ff7a1dc0 [ 41.069225] start: ca20300000, end: ca20301fff, i: 10 [ 41.069237] adding to system ... [ 41.069263] pci 0000:0a:00.0: calling quirk_netmos+0x0/0x104 [ 41.069291] pci 0000:0a:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.069375] pci 0000:0a:00.0: supports D1 D2 [ 41.069391] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 41.069412] pci 0000:0a:00.0: PME# disabled [ 41.069449] PCI: dev header type: 0 [ 41.069461] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,1 [ 41.069521] create device, devfn: 1, type: ehci [ 41.069582] class: 0xc0320 device name: 0000:0a:00.1 [ 41.069603] parse addresses (20 bytes) @ fffff800ff79e740 [ 41.069621] start: ca20302000, end: ca20303fff, i: 10 [ 41.069633] adding to system ... [ 41.069658] pci 0000:0a:00.1: calling quirk_netmos+0x0/0x104 [ 41.069686] pci 0000:0a:00.1: calling quirk_resource_alignment+0x0/0x1a4 [ 41.069770] pci 0000:0a:00.1: supports D1 D2 [ 41.069787] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 41.069807] pci 0000:0a:00.1: PME# disabled [ 41.069844] PCI: dev header type: 0 [ 41.069856] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,2 [ 41.069915] create device, devfn: 2, type: ohci [ 41.069976] class: 0xc0310 device name: 0000:0a:00.2 [ 41.069993] parse addresses (20 bytes) @ fffff800ff79d980 [ 41.070009] start: ca20304000, end: ca20305fff, i: 10 [ 41.070021] adding to system ... [ 41.070047] pci 0000:0a:00.2: calling quirk_netmos+0x0/0x104 [ 41.070075] pci 0000:0a:00.2: calling quirk_resource_alignment+0x0/0x1a4 [ 41.070159] pci 0000:0a:00.2: supports D1 D2 [ 41.070175] pci 0000:0a:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 41.070195] pci 0000:0a:00.2: PME# disabled [ 41.070233] PCI: dev header type: 0 [ 41.070245] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,3 [ 41.070304] create device, devfn: 3, type: ehci [ 41.070365] class: 0xc0320 device name: 0000:0a:00.3 [ 41.070382] parse addresses (20 bytes) @ fffff800ff79cbc0 [ 41.070398] start: ca20306000, end: ca20307fff, i: 10 [ 41.070410] adding to system ... [ 41.070435] pci 0000:0a:00.3: calling quirk_netmos+0x0/0x104 [ 41.070463] pci 0000:0a:00.3: calling quirk_resource_alignment+0x0/0x1a4 [ 41.070547] pci 0000:0a:00.3: supports D1 D2 [ 41.070563] pci 0000:0a:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 41.070583] pci 0000:0a:00.3: PME# disabled [ 41.070620] PCI: dev header type: 0 [ 41.070634] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,4 [ 41.070700] create device, devfn: 4, type: ohci [ 41.070761] class: 0xc0310 device name: 0000:0a:00.4 [ 41.070777] parse addresses (20 bytes) @ fffff800ff79be00 [ 41.070793] start: ca20308000, end: ca20309fff, i: 10 [ 41.070805] adding to system ... [ 41.070831] pci 0000:0a:00.4: calling quirk_netmos+0x0/0x104 [ 41.070859] pci 0000:0a:00.4: calling quirk_resource_alignment+0x0/0x1a4 [ 41.070943] pci 0000:0a:00.4: supports D1 D2 [ 41.070959] pci 0000:0a:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 41.070979] pci 0000:0a:00.4: PME# disabled [ 41.071016] PCI: dev header type: 0 [ 41.071028] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,5 [ 41.071089] create device, devfn: 5, type: ehci [ 41.071150] class: 0xc0320 device name: 0000:0a:00.5 [ 41.071167] parse addresses (20 bytes) @ fffff800ff79b040 [ 41.071183] start: ca2030a000, end: ca2030bfff, i: 10 [ 41.071195] adding to system ... [ 41.071220] pci 0000:0a:00.5: calling quirk_netmos+0x0/0x104 [ 41.071248] pci 0000:0a:00.5: calling quirk_resource_alignment+0x0/0x1a4 [ 41.071332] pci 0000:0a:00.5: supports D1 D2 [ 41.071348] pci 0000:0a:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 41.071369] pci 0000:0a:00.5: PME# disabled [ 41.071406] PCI: dev header type: 0 [ 41.071418] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,6 [ 41.071481] create device, devfn: 6, type: ohci [ 41.071542] class: 0xc0310 device name: 0000:0a:00.6 [ 41.071559] parse addresses (20 bytes) @ fffff800ff798a40 [ 41.071575] start: ca2030c000, end: ca2030dfff, i: 10 [ 41.071587] adding to system ... [ 41.071612] pci 0000:0a:00.6: calling quirk_netmos+0x0/0x104 [ 41.071640] pci 0000:0a:00.6: calling quirk_resource_alignment+0x0/0x1a4 [ 41.071726] pci 0000:0a:00.6: supports D1 D2 [ 41.071744] pci 0000:0a:00.6: PME# supported from D0 D1 D2 D3hot D3cold [ 41.071766] pci 0000:0a:00.6: PME# disabled [ 41.071803] PCI: dev header type: 0 [ 41.071815] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,7 [ 41.071878] create device, devfn: 7, type: ehci [ 41.071957] class: 0xc0320 device name: 0000:0a:00.7 [ 41.071975] parse addresses (20 bytes) @ fffff800ff797c80 [ 41.071991] start: ca2030e000, end: ca2030ffff, i: 10 [ 41.072003] adding to system ... [ 41.072029] pci 0000:0a:00.7: calling quirk_netmos+0x0/0x104 [ 41.072057] pci 0000:0a:00.7: calling quirk_resource_alignment+0x0/0x1a4 [ 41.072141] pci 0000:0a:00.7: supports D1 D2 [ 41.072157] pci 0000:0a:00.7: PME# supported from D0 D1 D2 D3hot D3cold [ 41.072178] pci 0000:0a:00.7: PME# disabled [ 41.072215] PCI: dev header type: 0 [ 41.072227] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@c [ 41.072291] create device, devfn: 60, type: pciex [ 41.072343] class: 0x60400 device name: 0000:06:0c.0 [ 41.072358] adding to system ... [ 41.072389] pci 0000:06:0c.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.072459] pci 0000:06:0c.0: PME# supported from D0 D3hot D3cold [ 41.072479] pci 0000:06:0c.0: PME# disabled [ 41.072514] PCI: dev header type: 1 [ 41.072525] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@c) [ 41.072553] bus name: PCI Bus 0000:0b [ 41.072566] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@c] bus no 11 [ 41.072583] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@d [ 41.072647] create device, devfn: 68, type: pciex [ 41.072700] class: 0x60400 device name: 0000:06:0d.0 [ 41.072714] adding to system ... [ 41.072751] pci 0000:06:0d.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.072819] pci 0000:06:0d.0: PME# supported from D0 D3hot D3cold [ 41.072840] pci 0000:06:0d.0: PME# disabled [ 41.072876] PCI: dev header type: 1 [ 41.072888] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@d) [ 41.072915] bus name: PCI Bus 0000:0c [ 41.072929] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@d] bus no 12 [ 41.072945] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@e [ 41.073010] create device, devfn: 70, type: pciex [ 41.073063] class: 0x60400 device name: 0000:06:0e.0 [ 41.073077] adding to system ... [ 41.073107] pci 0000:06:0e.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.073176] pci 0000:06:0e.0: PME# supported from D0 D3hot D3cold [ 41.073196] pci 0000:06:0e.0: PME# disabled [ 41.073230] PCI: dev header type: 1 [ 41.073242] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@e) [ 41.073268] bus name: PCI Bus 0000:0d [ 41.073282] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@e] bus no 13 [ 41.073298] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@f [ 41.073365] create device, devfn: 78, type: pciex [ 41.073419] class: 0x60400 device name: 0000:06:0f.0 [ 41.073433] adding to system ... [ 41.073464] pci 0000:06:0f.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.073532] pci 0000:06:0f.0: PME# supported from D0 D3hot D3cold [ 41.073551] pci 0000:06:0f.0: PME# disabled [ 41.073586] PCI: dev header type: 1 [ 41.073598] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@f) [ 41.073624] bus name: PCI Bus 0000:0e [ 41.073638] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@f] bus no 14 [ 41.073654] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@2 [ 41.073720] create device, devfn: 10, type: pciex [ 41.073772] class: 0x60400 device name: 0000:06:02.0 [ 41.073788] adding to system ... [ 41.073823] pci 0000:06:02.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.073892] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold [ 41.073912] pci 0000:06:02.0: PME# disabled [ 41.073946] PCI: dev header type: 1 [ 41.073958] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@2) [ 41.073985] bus name: PCI Bus 0000:0f [ 41.073998] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@2] bus no 15 [ 41.074015] * /pci@0/pci@1/pci@0/pci@4/pciex10b5,8619@0,1 [ 41.074082] create device, devfn: 1, type: [ 41.074133] class: 0x88000 device name: 0000:05:00.1 [ 41.074150] parse addresses (20 bytes) @ fffff800ff792040 [ 41.074166] start: ca20220000, end: ca2023ffff, i: 10 [ 41.074178] adding to system ... [ 41.074208] pci 0000:05:00.1: calling quirk_resource_alignment+0x0/0x1a4 [ 41.074296] PCI: dev header type: 0 [ 41.074309] * /pci@0/pci@1/pci@0/pci@5 [ 41.074375] create device, devfn: 28, type: pciex [ 41.074425] class: 0x60400 device name: 0000:03:05.0 [ 41.074440] adding to system ... [ 41.074470] pci 0000:03:05.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.074533] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold [ 41.074552] pci 0000:03:05.0: PME# disabled [ 41.074584] PCI: dev header type: 1 [ 41.074595] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@5) [ 41.074620] bus name: PCI Bus 0000:10 [ 41.074633] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@5] bus no 16 [ 41.074648] * /pci@0/pci@1/pci@0/pci@5/pci@0 [ 41.074714] create device, devfn: 0, type: pciex [ 41.074773] class: 0x60400 device name: 0000:10:00.0 [ 41.074788] adding to system ... [ 41.074818] pci 0000:10:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.074886] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 41.074906] pci 0000:10:00.0: PME# disabled [ 41.074948] PCI: dev header type: 1 [ 41.074959] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@5/pci@0) [ 41.074993] bus name: PCI Bus 0000:11 [ 41.075007] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@5/pci@0] bus no 17 [ 41.075023] * /pci@0/pci@1/pci@0/pci@5/pci@0/interrupt-controller@8 [ 41.075094] create device, devfn: 40, type: [ 41.075134] class: 0x80000 device name: 0000:11:08.0 [ 41.075151] parse addresses (20 bytes) @ fffff800ff78f540 [ 41.075167] start: 0, end: 0, i: 10 [ 41.075177] adding to system ... [ 41.075207] pci 0000:11:08.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.075237] PCI: dev header type: 0 [ 41.075250] * /pci@0/pci@1/pci@0/pci@6 [ 41.075318] create device, devfn: 30, type: pciex [ 41.075368] class: 0x60400 device name: 0000:03:06.0 [ 41.075383] adding to system ... [ 41.075413] pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.075475] pci 0000:03:06.0: PME# supported from D0 D3hot D3cold [ 41.075494] pci 0000:03:06.0: PME# disabled [ 41.075526] PCI: dev header type: 1 [ 41.075537] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@6) [ 41.075562] bus name: PCI Bus 0000:12 [ 41.075575] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@6] bus no 18 [ 41.075590] * /pci@0/pci@1/pci@0/pci@7 [ 41.075657] create device, devfn: 38, type: pciex [ 41.075706] class: 0x60400 device name: 0000:03:07.0 [ 41.075720] adding to system ... [ 41.075751] pci 0000:03:07.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.075813] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold [ 41.075832] pci 0000:03:07.0: PME# disabled [ 41.075864] PCI: dev header type: 1 [ 41.075877] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@7) [ 41.075906] bus name: PCI Bus 0000:13 [ 41.075920] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@7] bus no 19 [ 41.075934] * /pci@0/pci@1/pci@0/pci@8 [ 41.076009] create device, devfn: 40, type: pciex [ 41.076060] class: 0x60400 device name: 0000:03:08.0 [ 41.076074] adding to system ... [ 41.076104] pci 0000:03:08.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.076167] pci 0000:03:08.0: PME# supported from D0 D3hot D3cold [ 41.076186] pci 0000:03:08.0: PME# disabled [ 41.076218] PCI: dev header type: 1 [ 41.076229] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@8) [ 41.076254] bus name: PCI Bus 0000:14 [ 41.076267] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@8] bus no 20 [ 41.076282] * /pci@0/pci@1/pci@0/pci@9 [ 41.076350] create device, devfn: 48, type: pciex [ 41.076400] class: 0x60400 device name: 0000:03:09.0 [ 41.076414] adding to system ... [ 41.076444] pci 0000:03:09.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.076507] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold [ 41.076525] pci 0000:03:09.0: PME# disabled [ 41.076557] PCI: dev header type: 1 [ 41.076568] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@9) [ 41.076593] bus name: PCI Bus 0000:15 [ 41.076606] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@9] bus no 21 [ 41.076621] * /pci@0/pci@1/pci@0/pci@a [ 41.076689] create device, devfn: 50, type: pciex [ 41.076739] class: 0x60400 device name: 0000:03:0a.0 [ 41.076753] adding to system ... [ 41.076783] pci 0000:03:0a.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.076846] pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold [ 41.076865] pci 0000:03:0a.0: PME# disabled [ 41.076897] PCI: dev header type: 1 [ 41.076908] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@a) [ 41.076936] bus name: PCI Bus 0000:16 [ 41.076950] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@a] bus no 22 [ 41.076964] * /pci@0/pci@1/pci@0/pci@2 [ 41.077033] create device, devfn: 10, type: pciex [ 41.077084] class: 0x60400 device name: 0000:03:02.0 [ 41.077098] adding to system ... [ 41.077128] pci 0000:03:02.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.077190] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold [ 41.077209] pci 0000:03:02.0: PME# disabled [ 41.077241] PCI: dev header type: 1 [ 41.077252] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@2) [ 41.077277] bus name: PCI Bus 0000:17 [ 41.077290] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@2] bus no 23 [ 41.077305] * /pci@0/pci@1/pci@0/pci@2/ethernet@0 [ 41.077377] create device, devfn: 0, type: [ 41.077429] class: 0x20000 device name: 0000:17:00.0 [ 41.077445] parse addresses (80 bytes) @ fffff800ff788680 [ 41.077462] start: ca20400000, end: ca2041ffff, i: 10 [ 41.077477] start: ca20420000, end: ca2043ffff, i: 14 [ 41.077492] start: c810003000, end: c81000301f, i: 18 [ 41.077507] start: ca20440000, end: ca2045ffff, i: 30 [ 41.077519] adding to system ... [ 41.077550] pci 0000:17:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.077617] pci 0000:17:00.0: PME# supported from D0 D3hot D3cold [ 41.077637] pci 0000:17:00.0: PME# disabled [ 41.077668] PCI: dev header type: 0 [ 41.077680] * /pci@0/pci@1/pci@0/pci@2/ethernet@0,1 [ 41.077752] create device, devfn: 1, type: [ 41.077804] class: 0x20000 device name: 0000:17:00.1 [ 41.077821] parse addresses (80 bytes) @ fffff800ff7879c0 [ 41.077837] start: ca20460000, end: ca2047ffff, i: 10 [ 41.077852] start: ca20480000, end: ca2049ffff, i: 14 [ 41.077867] start: c810003020, end: c81000303f, i: 18 [ 41.077882] start: ca204a0000, end: ca204bffff, i: 30 [ 41.077894] adding to system ... [ 41.077925] pci 0000:17:00.1: calling quirk_resource_alignment+0x0/0x1a4 [ 41.077993] pci 0000:17:00.1: PME# supported from D0 D3hot D3cold [ 41.078012] pci 0000:17:00.1: PME# disabled [ 41.078046] PCI: dev header type: 0 [ 41.095901] /amba@400: SUN4V AMBA Bus Module [ 41.095916] /amba@400: On NUMA node -1 [ 41.095928] /amba@400: Device Handle 0x400 [ 41.095944] /amba@400: AMBA MEM [0x8a00000000 ~ 0x8dffffffff] [ 41.095965] /amba@400: Virtual DMA [0x80000000 ~ 0xffffffff] [ 41.155908] /amba@400: Imported 4 IOTSB entries from OBP [ 41.155927] AMBA: Scanning PBM /amba@400 [ 41.155940] * /amba@400/sata@8 [ 41.155953] periphid: 0x8 [ 41.156054] mem space: 0x8b01000000 ~ 8b01001fff [ 41.156067] irq: 0x9 [ 41.156426] * /amba@400/sata@a [ 41.156440] periphid: 0xa [ 41.156510] mem space: 0x8c01000000 ~ 8c01001fff [ 41.156523] irq: 0xa [ 41.156758] * /amba@400/usb@d [ 41.156774] periphid: 0xd [ 41.156844] mem space: 0x8a00411000 ~ 8a004113ff [ 41.156857] irq: 0xb [ 41.157083] * /amba@400/usb@c [ 41.157098] periphid: 0xc [ 41.157173] mem space: 0x8a00410000 ~ 8a004103ff [ 41.157186] irq: 0xc [ 41.157413] * /amba@400/usb@f [ 41.157428] periphid: 0xf [ 41.157502] mem space: 0x8a00421000 ~ 8a004213ff [ 41.157515] irq: 0xd [ 41.157749] * /amba@400/usb@e [ 41.157764] periphid: 0xe [ 41.157838] mem space: 0x8a00420000 ~ 8a004203ff [ 41.157851] irq: 0xe [ 41.158078] * /amba@400/i2c@10 [ 41.158093] periphid: 0x10 [ 41.158167] mem space: 0x8a00400000 ~ 8a004003ff [ 41.158180] irq: 0xf [ 41.158407] * /amba@400/i2c@11 [ 41.158421] periphid: 0x11 [ 41.158496] mem space: 0x8a00400400 ~ 8a004007ff [ 41.158509] irq: 0x10 [ 41.158744] * /amba@400/i2c@12 [ 41.158759] periphid: 0x12 [ 41.158834] mem space: 0x8a00400800 ~ 8a00400bff [ 41.158847] irq: 0x11 [ 41.159077] * /amba@400/i2c@13 [ 41.159091] periphid: 0x13 [ 41.159167] mem space: 0x8a00400c00 ~ 8a00400fff [ 41.159180] irq: 0x12 [ 41.159410] * /amba@400/i2s@14 [ 41.159424] periphid: 0x14 [ 41.159500] mem space: 0x8a00401000 ~ 8a004013ff [ 41.159513] irq: 0x13 [ 41.159745] * /amba@400/i2s@15 [ 41.159763] periphid: 0x15 [ 41.159839] mem space: 0x8a00401400 ~ 8a004017ff [ 41.159852] irq: 0x14 [ 41.160093] * /amba@400/i2s@16 [ 41.160107] periphid: 0x16 [ 41.160184] mem space: 0x8a00401800 ~ 8a00401bff [ 41.160198] irq: 0x15 [ 41.160426] * /amba@400/i2s@17 [ 41.160440] periphid: 0x17 [ 41.160518] mem space: 0x8a00401c00 ~ 8a00401fff [ 41.160531] irq: 0x16 [ 41.160761] * /amba@400/console@18 [ 41.160776] periphid: 0x18 [ 41.160859] mem space: 0x8a00402000 ~ 8a004023ff [ 41.160872] irq: 0x17 [ 41.161103] * /amba@400/console@19 [ 41.161117] periphid: 0x19 [ 41.161196] mem space: 0x8a00402400 ~ 8a004027ff [ 41.161209] irq: 0x18 [ 41.161439] * /amba@400/gpio@1a [ 41.161453] periphid: 0x1a [ 41.161533] mem space: 0x8a00402800 ~ 8a00402bff [ 41.161546] irq: 0x19 [ 41.162037] * /amba@400/ictl@1b [ 41.162052] periphid: 0x1b [ 41.162132] mem space: 0x8a00402c00 ~ 8a00402fff [ 41.162145] irq: 0x1a [ 41.162375] * /amba@400/rtc@1c [ 41.162390] periphid: 0x1c [ 41.162471] mem space: 0x8a00403000 ~ 8a004033ff [ 41.162485] irq: 0x1b [ 41.162716] * /amba@400/watchdog@1d [ 41.162731] periphid: 0x1d [ 41.162812] mem space: 0x8a00403400 ~ 8a004037ff [ 41.162825] irq: 0x1c [ 41.187831] bio: create slab <bio-0> at 0 [ 41.192286] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 41.192440] vgaarb: loaded [ 41.192451] vgaarb: bridge control possible 0000:01:00.0 [ 41.193396] SCSI subsystem initialized [ 41.196468] libata version 3.00 loaded. [ 41.197521] usbcore: registered new interface driver usbfs [ 41.197755] usbcore: registered new interface driver hub [ 41.198064] usbcore: registered new device driver usb [ 41.200082] Switching to clocksource stick [ 41.217874] NET: Registered protocol family 2 [ 41.218412] IP route cache hash table entries: 131072 (order: 7, 1048576 bytes) [ 41.221009] TCP established hash table entries: 524288 (order: 10, 8388608 bytes) [ 41.250930] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes) [ 41.255596] TCP: Hash tables configured (established 524288 bind 65536) [ 41.255615] TCP reno registered [ 41.257623] NET: Registered protocol family 1 [ 41.257760] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.257803] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.257836] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.257865] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.257896] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.257925] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.257956] pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.257984] pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258015] pci 0000:03:01.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258044] pci 0000:03:01.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258075] pci 0000:03:04.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258104] pci 0000:03:04.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258135] pci 0000:03:05.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258163] pci 0000:03:05.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258194] pci 0000:03:06.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258223] pci 0000:03:06.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258254] pci 0000:03:07.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258283] pci 0000:03:07.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258315] pci 0000:03:08.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258344] pci 0000:03:08.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258378] pci 0000:03:09.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258407] pci 0000:03:09.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258437] pci 0000:03:0a.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258466] pci 0000:03:0a.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258496] pci 0000:03:02.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258525] pci 0000:03:02.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258557] pci 0000:04:00.0: calling quirk_e100_interrupt+0x0/0x1e8 [ 41.258583] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258611] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258643] pci 0000:04:00.1: calling quirk_e100_interrupt+0x0/0x1e8 [ 41.258668] pci 0000:04:00.1: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258696] pci 0000:04:00.1: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258727] pci 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258756] pci 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258787] pci 0000:05:00.1: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258815] pci 0000:05:00.1: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258846] pci 0000:06:01.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258875] pci 0000:06:01.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258905] pci 0000:06:03.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258934] pci 0000:06:03.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258964] pci 0000:06:0a.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258993] pci 0000:06:0a.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259024] pci 0000:06:0b.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259052] pci 0000:06:0b.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259083] pci 0000:06:0c.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259112] pci 0000:06:0c.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259143] pci 0000:06:0d.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259171] pci 0000:06:0d.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259202] pci 0000:06:0e.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259230] pci 0000:06:0e.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259261] pci 0000:06:0f.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259289] pci 0000:06:0f.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259320] pci 0000:06:02.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259349] pci 0000:06:02.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259385] pci 0000:0a:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259415] pci 0000:0a:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259458] pci 0000:0a:00.1: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259487] pci 0000:0a:00.1: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259522] pci 0000:0a:00.2: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259551] pci 0000:0a:00.2: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259588] pci 0000:0a:00.3: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259617] pci 0000:0a:00.3: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259652] pci 0000:0a:00.4: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259681] pci 0000:0a:00.4: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259719] pci 0000:0a:00.5: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259747] pci 0000:0a:00.5: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259782] pci 0000:0a:00.6: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259811] pci 0000:0a:00.6: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259849] pci 0000:0a:00.7: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259878] pci 0000:0a:00.7: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259912] pci 0000:10:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259941] pci 0000:10:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259972] pci 0000:11:08.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.260001] pci 0000:11:08.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.260033] pci 0000:17:00.0: calling quirk_e100_interrupt+0x0/0x1e8 [ 41.260058] pci 0000:17:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.260086] pci 0000:17:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.260119] pci 0000:17:00.1: calling quirk_e100_interrupt+0x0/0x1e8 [ 41.260143] pci 0000:17:00.1: calling quirk_cardbus_legacy+0x0/0x38 [ 41.260171] pci 0000:17:00.1: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.260541] Unpacking initramfs... [ 43.105650] Freeing initrd memory: 14241k freed [ 43.124732] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 43.128158] VFS: Disk quotas dquot_6.5.2 [ 43.128378] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) [ 43.128956] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 43.129318] msgmni has been set to 7935 [ 43.135109] alg: No test for stdrng (krng) [ 43.135431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 43.135454] io scheduler noop registered [ 43.135468] io scheduler anticipatory registered [ 43.135482] io scheduler deadline registered (default) [ 43.135521] io scheduler cfq registered [ 43.153792] f0298788: ttyS0 at I/O 0x0 (irq = 2) is a SUN4V HCONS [ 43.155022] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 43.166368] loop: module loaded [ 43.172343] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 43.172624] mpt2sas version 02.100.03.00 loaded [ 43.173155] osst :I: Tape driver with OnStream support version 0.99.4 [ 43.173166] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 43.173988] SCSI Media Changer driver v0.25 [ 43.177164] Fusion MPT base driver 3.04.12 [ 43.177176] Copyright (c) 1999-2008 LSI Corporation [ 43.177218] Fusion MPT SPI Host driver 3.04.12 [ 43.177472] Fusion MPT FC Host driver 3.04.12 [ 43.177751] Fusion MPT SAS Host driver 3.04.12 [ 43.178016] Fusion MPT misc device (ioctl) driver 3.04.12 [ 43.178257] mptctl: Registered with Fusion MPT base driver [ 43.178278] mptctl: /dev/mptctl @ (major,minor=10,220) [ 43.178530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 43.178629] PCI: Enabling device: (0000:0a:00.1), cmd 2 [ 43.178660] ehci_hcd 0000:0a:00.1: enabling bus mastering [ 43.178678] ehci_hcd 0000:0a:00.1: EHCI Host Controller [ 43.178718] ehci_hcd 0000:0a:00.1: new USB bus registered, assigned bus number 1 [ 43.178870] ehci_hcd 0000:0a:00.1: Enabling legacy PCI PM [ 43.215396] ehci_hcd 0000:0a:00.1: enabling Mem-Wr-Inval [ 43.215469] ehci_hcd 0000:0a:00.1: irq 8, io mem 0xca20302000 [ 43.233503] ehci_hcd 0000:0a:00.1: USB 2.0 started, EHCI 1.00 [ 43.233623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.233644] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.233663] usb usb1: Product: EHCI Host Controller [ 43.233679] usb usb1: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.233695] usb usb1: SerialNumber: 0000:0a:00.1 [ 43.234123] usb usb1: configuration #1 chosen from 1 choice [ 43.234443] hub 1-0:1.0: USB hub found [ 43.234494] hub 1-0:1.0: 1 port detected [ 43.234697] PCI: Enabling device: (0000:0a:00.3), cmd 2 [ 43.234722] ehci_hcd 0000:0a:00.3: enabling bus mastering [ 43.234739] ehci_hcd 0000:0a:00.3: EHCI Host Controller [ 43.234775] ehci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 2 [ 43.234919] ehci_hcd 0000:0a:00.3: Enabling legacy PCI PM [ 43.263503] ehci_hcd 0000:0a:00.3: enabling Mem-Wr-Inval [ 43.263563] ehci_hcd 0000:0a:00.3: irq 5, io mem 0xca20306000 [ 43.283512] ehci_hcd 0000:0a:00.3: USB 2.0 started, EHCI 1.00 [ 43.283604] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.283625] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.283643] usb usb2: Product: EHCI Host Controller [ 43.283659] usb usb2: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.283675] usb usb2: SerialNumber: 0000:0a:00.3 [ 43.284070] usb usb2: configuration #1 chosen from 1 choice [ 43.284395] hub 2-0:1.0: USB hub found [ 43.284440] hub 2-0:1.0: 1 port detected [ 43.284630] PCI: Enabling device: (0000:0a:00.5), cmd 2 [ 43.284655] ehci_hcd 0000:0a:00.5: enabling bus mastering [ 43.284672] ehci_hcd 0000:0a:00.5: EHCI Host Controller [ 43.284708] ehci_hcd 0000:0a:00.5: new USB bus registered, assigned bus number 3 [ 43.284845] ehci_hcd 0000:0a:00.5: Enabling legacy PCI PM [ 43.313504] ehci_hcd 0000:0a:00.5: enabling Mem-Wr-Inval [ 43.313571] ehci_hcd 0000:0a:00.5: irq 6, io mem 0xca2030a000 [ 43.333548] ehci_hcd 0000:0a:00.5: USB 2.0 started, EHCI 1.00 [ 43.333640] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.333661] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.333679] usb usb3: Product: EHCI Host Controller [ 43.333694] usb usb3: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.333710] usb usb3: SerialNumber: 0000:0a:00.5 [ 43.334103] usb usb3: configuration #1 chosen from 1 choice [ 43.334412] hub 3-0:1.0: USB hub found [ 43.334457] hub 3-0:1.0: 1 port detected [ 43.334654] PCI: Enabling device: (0000:0a:00.7), cmd 2 [ 43.334679] ehci_hcd 0000:0a:00.7: enabling bus mastering [ 43.334696] ehci_hcd 0000:0a:00.7: EHCI Host Controller [ 43.334731] ehci_hcd 0000:0a:00.7: new USB bus registered, assigned bus number 4 [ 43.334864] ehci_hcd 0000:0a:00.7: Enabling legacy PCI PM [ 43.363516] ehci_hcd 0000:0a:00.7: enabling Mem-Wr-Inval [ 43.363581] ehci_hcd 0000:0a:00.7: irq 7, io mem 0xca2030e000 [ 43.383536] ehci_hcd 0000:0a:00.7: USB 2.0 started, EHCI 1.00 [ 43.383635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.383657] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.383675] usb usb4: Product: EHCI Host Controller [ 43.383690] usb usb4: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.383706] usb usb4: SerialNumber: 0000:0a:00.7 [ 43.384114] usb usb4: configuration #1 chosen from 1 choice [ 43.384422] hub 4-0:1.0: USB hub found [ 43.384468] hub 4-0:1.0: 1 port detected [ 43.384890] ehci-amba usb@c: AMBA EHCI [ 43.384924] ehci-amba usb@c: new USB bus registered, assigned bus number 5 [ 43.385274] ehci-amba usb@c: irq 12, io mem 0x8a00410000 [ 43.403514] ehci-amba usb@c: USB 2.0 started, EHCI 1.00 [ 43.403602] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.403623] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.403641] usb usb5: Product: AMBA EHCI [ 43.403655] usb usb5: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.403671] usb usb5: SerialNumber: AMBA USB EHCI [ 43.404070] usb usb5: configuration #1 chosen from 1 choice [ 43.404371] hub 5-0:1.0: USB hub found [ 43.404416] hub 5-0:1.0: 2 ports detected [ 43.404594] ehci-amba usb@e: AMBA EHCI [ 43.404627] ehci-amba usb@e: new USB bus registered, assigned bus number 6 [ 43.405449] ehci-amba usb@e: irq 14, io mem 0x8a00420000 [ 43.423501] ehci-amba usb@e: USB 2.0 started, EHCI 1.00 [ 43.423589] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.423612] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.423632] usb usb6: Product: AMBA EHCI [ 43.423646] usb usb6: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.423663] usb usb6: SerialNumber: AMBA USB EHCI [ 43.424111] usb usb6: configuration #1 chosen from 1 choice [ 43.424420] hub 6-0:1.0: USB hub found [ 43.424465] hub 6-0:1.0: 2 ports detected [ 43.424830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 43.424934] ohci_hcd 0000:0a:00.0: OHCI Host Controller [ 43.424977] ohci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 7 [ 43.425045] ohci_hcd 0000:0a:00.0: irq 8, io mem 0xca20300000 [ 43.487608] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.487630] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.487649] usb usb7: Product: OHCI Host Controller [ 43.487664] usb usb7: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.487680] usb usb7: SerialNumber: 0000:0a:00.0 [ 43.488086] usb usb7: configuration #1 chosen from 1 choice [ 43.488413] hub 7-0:1.0: USB hub found [ 43.488463] hub 7-0:1.0: 1 port detected [ 43.488678] ohci_hcd 0000:0a:00.2: OHCI Host Controller [ 43.488715] ohci_hcd 0000:0a:00.2: new USB bus registered, assigned bus number 8 [ 43.488780] ohci_hcd 0000:0a:00.2: irq 5, io mem 0xca20304000 [ 43.547593] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.547614] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.547633] usb usb8: Product: OHCI Host Controller [ 43.547648] usb usb8: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.547664] usb usb8: SerialNumber: 0000:0a:00.2 [ 43.548070] usb usb8: configuration #1 chosen from 1 choice [ 43.548388] hub 8-0:1.0: USB hub found [ 43.548442] hub 8-0:1.0: 1 port detected [ 43.548650] ohci_hcd 0000:0a:00.4: OHCI Host Controller [ 43.548687] ohci_hcd 0000:0a:00.4: new USB bus registered, assigned bus number 9 [ 43.548747] ohci_hcd 0000:0a:00.4: irq 6, io mem 0xca20308000 [ 43.607599] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.607624] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.607646] usb usb9: Product: OHCI Host Controller [ 43.607665] usb usb9: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.607684] usb usb9: SerialNumber: 0000:0a:00.4 [ 43.608148] usb usb9: configuration #1 chosen from 1 choice [ 43.608513] hub 9-0:1.0: USB hub found [ 43.608567] hub 9-0:1.0: 1 port detected [ 43.608810] ohci_hcd 0000:0a:00.6: OHCI Host Controller [ 43.608854] ohci_hcd 0000:0a:00.6: new USB bus registered, assigned bus number 10 [ 43.608924] ohci_hcd 0000:0a:00.6: irq 7, io mem 0xca2030c000 [ 43.667592] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.667613] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.667632] usb usb10: Product: OHCI Host Controller [ 43.667647] usb usb10: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.667663] usb usb10: SerialNumber: 0000:0a:00.6 [ 43.668082] usb usb10: configuration #1 chosen from 1 choice [ 43.668400] hub 10-0:1.0: USB hub found [ 43.668449] hub 10-0:1.0: 1 port detected [ 43.668847] ohci-amba usb@d: USB Host Controller [ 43.668882] ohci-amba usb@d: new USB bus registered, assigned bus number 11 [ 43.668947] ohci-amba usb@d: irq 11, io mem 0x8a00411000 [ 43.725574] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.725596] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.725617] usb usb11: Product: USB Host Controller [ 43.725634] usb usb11: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.725652] usb usb11: SerialNumber: AMBA USB OHCI [ 43.726044] usb usb11: configuration #1 chosen from 1 choice [ 43.726351] hub 11-0:1.0: USB hub found [ 43.726397] hub 11-0:1.0: 2 ports detected [ 43.726584] ohci-amba usb@f: USB Host Controller [ 43.726619] ohci-amba usb@f: new USB bus registered, assigned bus number 12 [ 43.726696] ohci-amba usb@f: irq 13, io mem 0x8a00421000 [ 43.785574] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.785596] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.785614] usb usb12: Product: USB Host Controller [ 43.785629] usb usb12: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.785645] usb usb12: SerialNumber: AMBA USB OHCI [ 43.786037] usb usb12: configuration #1 chosen from 1 choice [ 43.786345] hub 12-0:1.0: USB hub found [ 43.786391] hub 12-0:1.0: 2 ports detected [ 43.786994] usbcore: registered new interface driver usblp [ 43.787512] mice: PS/2 mouse device common for all mice [ 43.789261] Linux video capture interface: v2.00 [ 43.790002] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 43.796264] usbcore: registered new interface driver hiddev [ 43.796520] usbcore: registered new interface driver usbhid [ 43.796541] usbhid: v2.6:USB HID core driver [ 43.796595] func:uart_amba_probe [ 43.796607] port.mapbase:592709689344 [ 43.796961] console@18: ttyS1 at MMIO 0x8a00402000 (irq = 23) is a 16550A [ 43.797257] amba-uart ttyAMBAS0 probed,irq:23,port.type:4 [ 43.797290] func:uart_amba_probe [ 43.797302] port.mapbase:592709690368 [ 43.797619] console@19: ttyS2 at MMIO 0x8a00402400 (irq = 24) is a 16550A [ 43.797905] amba-uart ttyAMBAS1 probed,irq:24,port.type:4 [ 43.801869] rtc-ds1307 3-0068: rtc core: registered ds1339 as rtc0 [ 43.806241] ahci-amba sata@8: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl amba mode [ 43.806274] ahci-amba sata@8: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst [ 43.806742] scsi0 : ahci [ 43.807449] scsi1 : ahci [ 43.808004] ata1: SATA max UDMA/133 mmio [0x8b01000000-0x8b01001fff] port 0x100 irq 9 [ 43.808027] ata2: SATA max UDMA/133 mmio [0x8b01000000-0x8b01001fff] port 0x180 irq 9 [ 43.812140] ahci-amba sata@a: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl amba mode [ 43.812172] ahci-amba sata@a: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst [ 43.812621] scsi2 : ahci [ 43.813289] scsi3 : ahci [ 43.813838] ata3: SATA max UDMA/133 mmio [0x8c01000000-0x8c01001fff] port 0x100 irq 10 [ 43.813861] ata4: SATA max UDMA/133 mmio [0x8c01000000-0x8c01001fff] port 0x180 irq 10 [ 43.814809] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 43.814826] ALSA device list: [ 43.814836] No soundcards found. [ 43.815699] IPVS: Registered protocols () [ 43.815766] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 43.816075] IPVS: ipvs loaded. [ 43.818358] TCP cubic registered [ 43.818375] NET: Registered protocol family 17 [ 43.824924] rtc-ds1307 3-0068: setting system clock to 2014-09-05 05:07:00 UTC (1409893620) [ 44.023522] usb 3-1: new high speed USB device using ehci_hcd and address 2 [ 44.163511] ata2: SATA link down (SStatus 0 SControl 310) [ 44.163563] ata1: SATA link down (SStatus 0 SControl 310) [ 44.165762] ata4: SATA link down (SStatus 0 SControl 310) [ 44.178540] usb 3-1: New USB device found, idVendor=13fe, idProduct=4100 [ 44.178561] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 44.178580] usb 3-1: Product: USB DISK 2.0 [ 44.178593] usb 3-1: Manufacturer: [ 44.178609] usb 3-1: SerialNumber: 070D2AF2D655E500 [ 44.179097] usb 3-1: configuration #1 chosen from 1 choice [ 44.343529] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 44.355059] ata3.00: ATA-8: KINGSTON SV300S37A60G, 505ABBF1, max UDMA/133 [ 44.355082] ata3.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 44.365101] ata3.00: configured for UDMA/133 [ 44.385663] scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5 [ 44.386785] sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 44.387087] sd 2:0:0:0: [sda] Write Protect is off [ 44.387108] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 44.387269] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.388123] sda: sda1 sda2 sda3 [ 44.390839] sd 2:0:0:0: [sda] Attached SCSI disk [ 44.471768] dracut: dracut-004-43.5.ft.ky3 [ 44.483535] usb 7-1: new low speed USB device using ohci_hcd and address 2 [ 44.527045] udev: starting version 145 [ 44.679541] usb 7-1: New USB device found, idVendor=0a81, idProduct=0205 [ 44.679567] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.679588] usb 7-1: Product: PS2 to USB Converter [ 44.679604] usb 7-1: Manufacturer: CHESEN [ 44.680251] usb 7-1: configuration #1 chosen from 1 choice [ 44.693737] input: CHESEN PS2 to USB Converter as /devices/root/f029cd34/pci0000:00/0000:00:01.0/0000:02:00.0/0000:03:04.0/0000:05:00.0/0000:06:0b.0/0000:0a:00.0/usb7/7-1/7-1:1.0/input/input0 [ 44.694183] generic-usb 0003:0A81:0205.0001: input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:0a:00.0-1/input0 [ 44.705801] input: CHESEN PS2 to USB Converter as /devices/root/f029cd34/pci0000:00/0000:00:01.0/0000:02:00.0/0000:03:04.0/0000:05:00.0/0000:06:0b.0/0000:0a:00.0/usb7/7-1/7-1:1.1/input/input1 [ 44.706493] generic-usb 0003:0A81:0205.0002: input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:0a:00.0-1/input1 [ 44.801853] [drm] Initialized drm 1.1.0 20060810 [ 44.844393] usb 11-1: new full speed USB device using ohci-amba and address 2 [ 45.026552] usb 11-1: New USB device found, idVendor=0d8c, idProduct=0105 [ 45.026577] usb 11-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 45.026596] usb 11-1: Product: USB Multimedia Audio Device [ 45.026612] usb 11-1: Manufacturer: C-Media Electronics Inc. [ 45.028735] usb 11-1: configuration #1 chosen from 1 choice [ 45.036290] input: C-Media Electronics Inc. USB Multimedia Audio Device as /devices/root/f02a56cc/usb@d/usb11/11-1/11-1:1.3/input/input2 [ 45.036717] generic-usb 0003:0D8C:0105.0003: input: USB HID v1.00 Device [C-Media Electronics Inc. USB Multimedia Audio Device] on usb-AMBA USB OHCI-1/input3 [ 45.074746] [drm] radeon defaulting to kernel modesetting. [ 45.074764] [drm] radeon kernel modesetting enabled. [ 45.075009] radeon 0000:01:00.0: enabling bus mastering [ 45.075931] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1002:0x0000). [ 45.075952] radeon: No suitable DMA available. [ 45.075965] [drm] register mmio base: 0x00200000 [ 45.075978] [drm] register mmio size: 131072 [ 47.870203] ATOM BIOS: Great [ 47.870342] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 47.870366] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [ 47.870385] [drm] Detected VRAM RAM=512M, BAR=256M [ 47.870398] [drm] RAM width 64bits DDR [ 47.870640] [TTM] Zone kernel: Available graphics memory: 2031676 kiB. [ 47.870659] [TTM] Initializing pool allocator. [ 47.870764] [drm] radeon: 512M of VRAM memory ready [ 47.870781] [drm] radeon: 512M of GTT memory ready. [ 47.870846] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 47.870862] [drm] Driver supports precise vblank timestamp query. [ 47.870953] radeon 0000:01:00.0: radeon: using MSI. [ 47.871044] [drm] radeon: irq initialized. [ 47.871076] [drm] GART: num cpu pages 65536, num gpu pages 131072 [ 47.872956] [drm] Loading CEDAR Microcode [ 47.872979] platform radeon_cp.0: firmware: requesting radeon/CEDAR_pfp.bin [ 47.886771] platform radeon_cp.0: firmware: requesting radeon/CEDAR_me.bin [ 47.900539] platform radeon_cp.0: firmware: requesting radeon/CEDAR_rlc.bin [ 47.924508] radeon 0000:01:00.0: WB enabled [ 47.941477] [drm] ring test succeeded in 0 usecs [ 47.942049] [drm] radeon: ib pool ready. [ 47.942372] [drm] ib test succeeded in 0 usecs [ 47.947370] [drm] Radeon Display Connectors [ 47.947385] [drm] Connector 0: [ 47.947396] [drm] DisplayPort [ 47.947406] [drm] HPD4 [ 47.947423] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 47.947438] [drm] Encoders: [ 47.947449] [drm] DFP1: INTERNAL_UNIPHY [ 47.947462] [drm] Connector 1: [ 47.947471] [drm] DVI-D [ 47.947481] [drm] HPD1 [ 47.947497] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 47.947511] [drm] Encoders: [ 47.947522] [drm] DFP2: INTERNAL_UNIPHY1 [ 47.947533] [drm] Connector 2: [ 47.947543] [drm] DVI-D [ 47.947552] [drm] HPD2 [ 47.947568] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 47.947583] [drm] Encoders: [ 47.947594] [drm] DFP3: INTERNAL_UNIPHY1 [ 47.947605] [drm] Connector 3: [ 47.947615] [drm] VGA [ 47.947631] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 47.947646] [drm] Encoders: [ 47.947656] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 47.958016] [drm] Radeon display connector DP-1: No monitor connected or invalid EDID [ 47.968364] [drm] Radeon display connector DVI-D-1: No monitor connected or invalid EDID [ 47.978740] [drm] Radeon display connector DVI-D-2: No monitor connected or invalid EDID [ 47.989126] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [ 47.989241] [drm] Internal thermal controller with fan control [ 47.989681] [drm] radeon: power management initialized [ 48.249075] [drm] fb mappable at 0xCA10142000 [ 48.
linux cat合并.bin文件的问题
define Image/Build/Ath $(eval fwsize=$(call mtdpartsize,firmware,$(4))) $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) $(eval kernsize=$(call mtdpartsize,kernel,$(4))) $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) if [ -e "$(call sysupname,$(1),$(2))" ]; then \ dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ of=$(call imgname,kernel,$(2)).bin bs=1 conv=sync count=0x170000; \ dd if=$(KDIR)/root.$(1) \ of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ fi cat $(PWD)/image/art_wdr7550.bin >> /work/lufei/openwrt_trunk/bin/ar71xx/openwrt-ar71xx-generic-ap135-020-kernel.bin echo "==================================" echo "$(PWD)" endef 倒数第四句,想用cat将 art_wdr7550.bin接至 openwrt-ar71xx-generic-ap135-020-kernel.bin的末尾,问题来了 kernel原大小是1M多,art的大小是64K 可是这样做的结果是 生成的kernel只有64K了。 想问问问题出现在哪里,应该怎么做才能实现呢
终于明白阿里百度这样的大公司,为什么面试经常拿ThreadLocal考验求职者了
点击上面↑「爱开发」关注我们每晚10点,捕获技术思考和创业资源洞察什么是ThreadLocalThreadLocal是一个本地线程副本变量工具类,各个线程都拥有一份线程私有的数
程序员必须掌握的核心算法有哪些?
由于我之前一直强调数据结构以及算法学习的重要性,所以就有一些读者经常问我,数据结构与算法应该要学习到哪个程度呢?,说实话,这个问题我不知道要怎么回答你,主要取决于你想学习到哪些程度,不过针对这个问题,我稍微总结一下我学过的算法知识点,以及我觉得值得学习的算法。这些算法与数据结构的学习大多数是零散的,并没有一本把他们全部覆盖的书籍。下面是我觉得值得学习的一些算法以及数据结构,当然,我也会整理一些看过...
《奇巧淫技》系列-python!!每天早上八点自动发送天气预报邮件到QQ邮箱
此博客仅为我业余记录文章所用,发布到此,仅供网友阅读参考,如有侵权,请通知我,我会删掉。 补充 有不少读者留言说本文章没有用,因为天气预报直接打开手机就可以收到了,为何要多此一举发送到邮箱呢!!!那我在这里只能说:因为你没用,所以你没用!!! 这里主要介绍的是思路,不是天气预报!不是天气预报!!不是天气预报!!!天气预报只是用于举例。请各位不要再刚了!!! 下面是我会用到的两个场景: 每日下
面试官问我:什么是消息队列?什么场景需要他?用了会出现什么问题?
你知道的越多,你不知道的越多 点赞再看,养成习惯 GitHub上已经开源 https://github.com/JavaFamily 有一线大厂面试点脑图、个人联系方式,欢迎Star和完善 前言 消息队列在互联网技术存储方面使用如此广泛,几乎所有的后端技术面试官都要在消息队列的使用和原理方面对小伙伴们进行360°的刁难。 作为一个在互联网公司面一次拿一次Offer的面霸,打败了无数
8年经验面试官详解 Java 面试秘诀
    作者 | 胡书敏 责编 | 刘静 出品 | CSDN(ID:CSDNnews) 本人目前在一家知名外企担任架构师,而且最近八年来,在多家外企和互联网公司担任Java技术面试官,前后累计面试了有两三百位候选人。在本文里,就将结合本人的面试经验,针对Java初学者、Java初级开发和Java开发,给出若干准备简历和准备面试的建议。   Java程序员准备和投递简历的实
究竟你适不适合买Mac?
我清晰的记得,刚买的macbook pro回到家,开机后第一件事情,就是上了淘宝网,花了500元钱,找了一个上门维修电脑的师傅,上门给我装了一个windows系统。。。。。。 表砍我。。。 当时买mac的初衷,只是想要个固态硬盘的笔记本,用来运行一些复杂的扑克软件。而看了当时所有的SSD笔记本后,最终决定,还是买个好(xiong)看(da)的。 已经有好几个朋友问我mba怎么样了,所以今天尽量客观
程序员一般通过什么途径接私活?
二哥,你好,我想知道一般程序猿都如何接私活,我也想接,能告诉我一些方法吗? 上面是一个读者“烦不烦”问我的一个问题。其实不止是“烦不烦”,还有很多读者问过我类似这样的问题。 我接的私活不算多,挣到的钱也没有多少,加起来不到 20W。说实话,这个数目说出来我是有点心虚的,毕竟太少了,大家轻喷。但我想,恰好配得上“一般程序员”这个称号啊。毕竟苍蝇再小也是肉,我也算是有经验的人了。 唾弃接私活、做外
大学四年自学走来,这些珍藏的「实用工具/学习网站」我全贡献出来了
知乎高赞:文中列举了互联网一线大厂程序员都在用的工具集合,涉及面非常广,小白和老手都可以进来看看,或许有新收获。
《阿里巴巴开发手册》读书笔记-编程规约
Java编程规约命名风格 命名风格 类名使用UpperCamelCase风格 方法名,参数名,成员变量,局部变量都统一使用lowerCamelcase风格 常量命名全部大写,单词间用下划线隔开, 力求语义表达完整清楚,不要嫌名字长 ...
Python爬虫爬取淘宝,京东商品信息
小编是一个理科生,不善长说一些废话。简单介绍下原理然后直接上代码。 使用的工具(Python+pycharm2019.3+selenium+xpath+chromedriver)其中要使用pycharm也可以私聊我selenium是一个框架可以通过pip下载 pip install selenium -i https://pypi.tuna.tsinghua.edu.cn/simple/ 
阿里程序员写了一个新手都写不出的低级bug,被骂惨了。
你知道的越多,你不知道的越多 点赞再看,养成习惯 本文 GitHub https://github.com/JavaFamily 已收录,有一线大厂面试点思维导图,也整理了很多我的文档,欢迎Star和完善,大家面试可以参照考点复习,希望我们一起有点东西。 前前言 为啥今天有个前前言呢? 因为你们的丙丙啊,昨天有牌面了哟,直接被微信官方推荐,知乎推荐,也就仅仅是还行吧(心里乐开花)
Java工作4年来应聘要16K最后没要,细节如下。。。
前奏: 今天2B哥和大家分享一位前几天面试的一位应聘者,工作4年26岁,统招本科。 以下就是他的简历和面试情况。 基本情况: 专业技能: 1、&nbsp;熟悉Sping了解SpringMVC、SpringBoot、Mybatis等框架、了解SpringCloud微服务 2、&nbsp;熟悉常用项目管理工具:SVN、GIT、MAVEN、Jenkins 3、&nbsp;熟悉Nginx、tomca
Python爬虫精简步骤1 获取数据
爬虫的工作分为四步: 1.获取数据。爬虫程序会根据我们提供的网址,向服务器发起请求,然后返回数据。 2.解析数据。爬虫程序会把服务器返回的数据解析成我们能读懂的格式。 3.提取数据。爬虫程序再从中提取出我们需要的数据。 4.储存数据。爬虫程序把这些有用的数据保存起来,便于你日后的使用和分析。 这一篇的内容就是:获取数据。 首先,我们将会利用一个强大的库——requests来获取数据。 在电脑上安装
Python绘图,圣诞树,花,爱心 | Turtle篇
1.画圣诞树 import turtle screen = turtle.Screen() screen.setup(800,600) circle = turtle.Turtle() circle.shape('circle') circle.color('red') circle.speed('fastest') circle.up() square = turtle.Turtle()
作为一个程序员,CPU的这些硬核知识你必须会!
CPU对每个程序员来说,是个既熟悉又陌生的东西? 如果你只知道CPU是中央处理器的话,那可能对你并没有什么用,那么作为程序员的我们,必须要搞懂的就是CPU这家伙是如何运行的,尤其要搞懂它里面的寄存器是怎么一回事,因为这将让你从底层明白程序的运行机制。 随我一起,来好好认识下CPU这货吧 把CPU掰开来看 对于CPU来说,我们首先就要搞明白它是怎么回事,也就是它的内部构造,当然,CPU那么牛的一个东
破14亿,Python分析我国存在哪些人口危机!
2020年1月17日,国家统计局发布了2019年国民经济报告,报告中指出我国人口突破14亿。 猪哥的朋友圈被14亿人口刷屏,但是很多人并没有看到我国复杂的人口问题:老龄化、男女比例失衡、生育率下降、人口红利下降等。 今天我们就来分析一下我们国家的人口数据吧! 更多有趣分析教程,扫描下方二维码关注vx公号「裸睡的猪」 即可查看! 一、背景 1.人口突破14亿 2020年1月17日,国家统计局发布
听说想当黑客的都玩过这个Monyer游戏(1~14攻略)
第零关 进入传送门开始第0关(游戏链接) 请点击链接进入第1关: 连接在左边→ ←连接在右边 看不到啊。。。。(只能看到一堆大佬做完的留名,也能看到菜鸡的我,在后面~~) 直接fn+f12吧 &lt;span&gt;连接在左边→&lt;/span&gt; &lt;a href="first.php"&gt;&lt;/a&gt; &lt;span&gt;←连接在右边&lt;/span&gt; o
在家远程办公效率低?那你一定要收好这个「在家办公」神器!
相信大家都已经收到国务院延长春节假期的消息,接下来,在家远程办公可能将会持续一段时间。 但是问题来了。远程办公不是人在电脑前就当坐班了,相反,对于沟通效率,文件协作,以及信息安全都有着极高的要求。有着非常多的挑战,比如: 1在异地互相不见面的会议上,如何提高沟通效率? 2文件之间的来往反馈如何做到及时性?如何保证信息安全? 3如何规划安排每天工作,以及如何进行成果验收? ......
作为一个程序员,内存和磁盘的这些事情,你不得不知道啊!!!
截止目前,我已经分享了如下几篇文章: 一个程序在计算机中是如何运行的?超级干货!!! 作为一个程序员,CPU的这些硬核知识你必须会! 作为一个程序员,内存的这些硬核知识你必须懂! 这些知识可以说是我们之前都不太重视的基础知识,可能大家在上大学的时候都学习过了,但是嘞,当时由于老师讲解的没那么有趣,又加上这些知识本身就比较枯燥,所以嘞,大家当初几乎等于没学。 再说啦,学习这些,也看不出来有什么用啊!
别低估自己的直觉,也别高估自己的智商
所有群全部吵翻天,朋友圈全部沦陷,公众号疯狂转发。这两周没怎么发原创,只发新闻,可能有人注意到了。我不是懒,是文章写了却没发,因为大家的关注力始终在这次的疫情上面,发了也没人看。当然,我...
这个世界上人真的分三六九等,你信吗?
偶然间,在知乎上看到一个问题 一时间,勾起了我深深的回忆。 以前在厂里打过两次工,做过家教,干过辅导班,做过中介。零下几度的晚上,贴过广告,满脸、满手地长冻疮。   再回首那段岁月,虽然苦,但让我学会了坚持和忍耐。让我明白了,在这个世界上,无论环境多么的恶劣,只要心存希望,星星之火,亦可燎原。   下文是原回答,希望能对你能有所启发。   如果我说,这个世界上人真的分三六九等,
为什么听过很多道理,依然过不好这一生?
记录学习笔记是一个重要的习惯,不希望学习过的东西成为过眼云烟。做总结的同时也是一次复盘思考的过程。 本文是根据阅读得到 App上《万维钢·精英日课》部分文章后所做的一点笔记和思考。学习是一个系统的过程,思维模型的建立需要相对完整的学习和思考过程。以下观点是在碎片化阅读后总结的一点心得总结。
B 站上有哪些很好的学习资源?
哇说起B站,在小九眼里就是宝藏般的存在,放年假宅在家时一天刷6、7个小时不在话下,更别提今年的跨年晚会,我简直是跪着看完的!! 最早大家聚在在B站是为了追番,再后来我在上面刷欧美新歌和漂亮小姐姐的舞蹈视频,最近两年我和周围的朋友们已经把B站当作学习教室了,而且学习成本还免费,真是个励志的好平台ヽ(.◕ฺˇд ˇ◕ฺ;)ノ 下面我们就来盘点一下B站上优质的学习资源: 综合类 Oeasy: 综合
如何优雅地打印一个Java对象?
你好呀,我是沉默王二,一个和黄家驹一样身高,和刘德华一样颜值的程序员。虽然已经写了十多年的 Java 代码,但仍然觉得自己是个菜鸟(请允许我惭愧一下)。 在一个月黑风高的夜晚,我思前想后,觉得再也不能这么蹉跎下去了。于是痛下决心,准备通过输出的方式倒逼输入,以此来修炼自己的内功,从而进阶成为一名真正意义上的大神。与此同时,希望这些文章能够帮助到更多的读者,让大家在学习的路上不再寂寞、空虚和冷。 ...
雷火神山直播超两亿,Web播放器事件监听是怎么实现的?
Web播放器解决了在手机浏览器和PC浏览器上播放音视频数据的问题,让视音频内容可以不依赖用户安装App,就能进行播放以及在社交平台进行传播。在视频业务大数据平台中,播放数据的统计分析非常重要,所以Web播放器在使用过程中,需要对其内部的数据进行收集并上报至服务端,此时,就需要对发生在其内部的一些播放行为进行事件监听。 那么Web播放器事件监听是怎么实现的呢? 01 监听事件明细表 名
3万字总结,Mysql优化之精髓
本文知识点较多,篇幅较长,请耐心学习 MySQL已经成为时下关系型数据库产品的中坚力量,备受互联网大厂的青睐,出门面试想进BAT,想拿高工资,不会点MySQL优化知识,拿offer的成功率会大大下降。 为什么要优化 系统的吞吐量瓶颈往往出现在数据库的访问速度上 随着应用程序的运行,数据库的中的数据会越来越多,处理时间会相应变慢 数据是存放在磁盘上的,读写速度无法和内存相比 如何优化 设计
Linux 命令(122)—— watch 命令
1.命令简介 2.命令格式 3.选项说明 4.常用示例 参考文献 [1] watch(1) manual
Linux 命令(121)—— cal 命令
1.命令简介 2.命令格式 3.选项说明 4.常用示例 参考文献 [1] cal(1) manual
记jsp+servlet+jdbc实现的新闻管理系统
1.工具:eclipse+SQLyog 2.介绍:实现的内容就是显示新闻的基本信息,然后一个增删改查的操作。 3.数据库表设计 列名 中文名称 数据类型 长度 非空 newsId 文章ID int 11 √ newsTitle 文章标题 varchar 20 √ newsContent 文章内容 text newsStatus 是否审核 varchar 10 news...
Python新型冠状病毒疫情数据自动爬取+统计+发送报告+数据屏幕(三)发送篇
今天介绍的项目是使用 Itchat 发送统计报告 项目功能设计: 定时爬取疫情数据存入Mysql 进行数据分析制作疫情报告 使用itchat给亲人朋友发送分析报告(本文) 基于Django做数据屏幕 使用Tableau做数据分析 来看看最终效果 目前已经完成,预计2月12日前更新 使用 itchat 发送数据统计报告 itchat 是一个基于 web微信的一个框架,但微信官方并不允
相关热词 c# 识别回车 c#生成条形码ean13 c#子控制器调用父控制器 c# 写大文件 c# 浏览pdf c#获取桌面图标的句柄 c# list反射 c# 句柄 进程 c# 倒计时 线程 c# 窗体背景色
立即提问