我按照百度到的方法尝试了一遍还是不行
一直出现这个错误,有大佬指导一下么
关注
码龄 粉丝数 原力等级 --
- 被采纳
- 被点赞
- 采纳率
linux 插入U盘后 出现unable to enumerate USB device
收起
- 写回答
- 好问题 0 提建议
- 关注问题
微信扫一扫点击复制链接分享
- 邀请回答
- 编辑 收藏 删除 结题
- 收藏 举报
2条回答 默认 最新
- 关注
码龄 粉丝数 原力等级 --
- 被采纳
- 被点赞
- 采纳率
qq_36669643 2021-09-03 15:14关注我也出现了这个问题 问下有解决吗?
本回答被题主选为最佳回答 , 对您是否有帮助呢? 本回答被专家选为最佳回答 , 对您是否有帮助呢? 本回答被题主和专家选为最佳回答 , 对您是否有帮助呢?评论 打赏解决 1无用举报
微信扫一扫点击复制链接分享
评论按下Enter换行,Ctrl+Enter发表内容
报告相同问题?
提交
- 2014-04-07 23:22Macle_Chen的博客 Please press Enter to activate this console. [root@FriendlyARM /]# usb 1-1: new full speed USB device using s3c2410-ohci and address 6 usb 1-1: device descriptor read/64, error -62 usb 1-1: device
- 2012-12-26 19:17psvoldemort的博客 mini2440,使用2.6.32.2内核,插入usb设备(u盘,usb camera,usb wifi)均后出现该问题: usb 1-1: new full speed USB device using s3c2410-ohci and address 2 usb 1-1: device descriptor read/64, error -62 ...
- 2022-10-19 10:33JasonOPS的博客 linux虚拟机挂载USB3.1U盘报错解决
- 2024-10-12 11:15nan_nan_nan_nan_nan的博客 unable to enumerate USB device on port 1
- 2021-03-09 14:45999sie的博客 fdisk -l 也并不显示插入的u盘,使用dmesg发现,unable to enumerate usb device, device descriptor read/64 ,error 18。 经过外网查询后发现,是因为虚拟机只能处理usb2.0,换个usb插口吧,肯定插到3.0上了。 ....
- weixin_39959369的博客 目前linux内核支持usb2.0是依靠ehci_hcd这个增强型内核模块,但好像一直存在问题,导致很多usb2.0的设备(如大容量u盘、移动硬盘)接入后系统长时间无法识别,设备无法在系统中注册,频繁报错:usb 1-3: new high ...
- 2014-06-23 12:23当你将U盘插入Linux虚拟机后,系统通常会自动检测到新设备。你可以通过`dmesg`命令查看最近的系统消息,以确认U盘是否已被识别: ```bash dmesg | tail ``` 你将看到类似于`[时间] USB Mass Storage device found`...
- 2022-03-29 23:16四季帆的博客 [ 2519.368698] usb 1-1: new high-speed USB device number 19 using ci_hdrc //hub_port_init <6>[ 2519.531509] usb 1-1: New USB device found, idVendor=0930, idProduct=6544 <...
- 2021-05-14 12:25雪中阳的博客 1.未作移植,插入U盘后提示如下[root@Emux/]#usb 1-1: new full speed USB device using s3c2410-ohci and address 2usb 1-1: device descriptor read/64, error -62usb 1-1: device descriptor read/64, error -62...
- 2020-07-16 17:26sunnyhyh的博客 ci_hdrc ci_hdrc.0: port 1 reset error -110 ci_hdrc ci_hdrc.0: port 1 reset error -110 ci_hdrc ci_hdrc.0: port 1 reset error -110 ci_hdrc ci_hdrc.0: port 1 reset...usb usb1-port1: Cannot enable. Maybe the
- 2021-05-17 06:31高冷小笼包的博客 dev) { printf("Unable to find parent usb device."); exit(1); } /* From here, we can call get_sysattr_value() for each file in the device's /sys entry. The strings passed into these functions (id...
- 2023-03-17 09:26赟赟、嵌入式的博客 USB设备插入检测打印信息,如下。
- 2021-05-11 15:03Justmeet的博客 dev) { printf("Unable to find parent usb device."); exit(1); } /* From here, we can call get_sysattr_value() for each file in the device's /sys entry. The strings passed into these functions (id...
- 2017-08-13 21:12dayL_W的博客 插入USB设备,如U盘,读卡器等时出现: [root@Nision=W]#usb 1-1: new full speed USB device usings3c2410-ohci and address 2 usb 1-1: device descriptor read/64, error -62 usb 1-1: device descriptor read...
- 2021-05-11 15:02Yi Lu的博客 #include #include#include#include#includeint main (void){struct udev *...struct udev_enumerate *enumerate;struct udev_list_entry *devices, *dev_list_entry;struct udev_device *dev;/*Create the udev o...
- 2025-02-08 11:34飞翔的荷兰人号z的博客 USB枚举基本的流程为:用户把USB设备插入USB端口或给系统启动时设备上电 USB端口指的是主机下的根hub或主机下行端口上的hub端口。Hub给端口供电,连接着的设备处于上电状态。Hub检测它各个端口数据线上(D+/D-)的...
- 2021-05-14 01:04信海松的博客 该楼层疑似违规已被系统折叠 隐藏此楼查看此楼 ... hub 1-0:1.0: unable to enumerate USB device on port 1 Sep 21 18:57:16 localhost chronyd[741]: System clock wrong by 37.515576 seconds, adjustment started
- 2024-11-07 11:45wellnw的博客 ubuntu18.04插入U盘无法挂载 ,查看dmesg信息提示。
- 2020-05-19 20:40eric_rain的博客 Linux版本:V4.19.78 硬件平台:Tiny6410 问题一:startup error -75 错误日志 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-s3c2410: OHCI S3C2410 driver s3c2410-ohci s3c2410-ohci: OHCI Host ...
- 2024-05-29 16:50就是太懒的博客 U盘枚举失败问题调试
- 没有解决我的问题, 去提问