weixin_39920397
weixin_39920397
2020-11-20 21:11

TP-LINK TL-WN823N V2 WiFi adapter

I've been testing this driver for a few days, and I can tell that it works nice with TP-LINK TL-WN823N V2 WiFi adapter . I've got transfer around 170 mbit/s. There's a few problems with replugging/unplugging the device. I always get the following log:


Aug 14 12:14:07 morfikownia kernel: ------------[] cut here ]------------
Aug 14 12:14:07 morfikownia kernel: WARNING: CPU: 0 PID: 36955 at /build/linux-aOJbQa/linux-4.6.4/fs/proc/generic.c:564 remove_proc_entry+0x171/0x180
Aug 14 12:14:07 morfikownia kernel: name 'wlan20'
Aug 14 12:14:07 morfikownia kernel: Modules linked in: 8192eu(OE) veth(E) nls_utf8(E) nls_cp437(E) vfat(E) fat(E) uas(E) usb_storage(E) fuse(E) cpuid(E) cpufreq_conservative(E) cpufreq_userspace(E) cpufreq_powersave(E) cpufreq_stats(E) bridge(E) stp(E) llc(E) drbg(E) ansi_cprng(E) ctr(E) ccm(E) nf_log_ipv4(E) nf_log_common(E) xt_LOG(E) xt_limit(E) xt_pkttype(E) ipt_REJECT(E) nf_reject_ipv4(E) ipt_SYNPROXY(E) nf_synproxy_core(E) xt_conntrack(E) nf_conntrack_netlink(E) iptable_filter(E) ipt_MASQUERADE(E) nf_nat_masquerade_ipv4(E) iptable_nat(E) nf_nat_ipv4(E) nf_nat(E) xt_TCPMSS(E) xt_comment(E) xt_statistic(E) xt_owner(E) xt_mark(E) iptable_mangle(E) xt_tcpudp(E) xt_CT(E) xt_multiport(E) xt_set(E) iptable_raw(E) ip_tables(E) hid_a4tech(E) iTCO_wdt(E) iTCO_vendor_support(E) ip_set_hash_ip(E) ip_set_hash_net(E) acpi_cpufreq(E)
Aug 14 12:14:07 morfikownia kernel:  ip_set(E) nfnetlink(E) battery(E) ac(E) intel_powerclamp(E) lpc_ich(E) processor(E) hp_wmi(E) sparse_keymap(E) shpchp(E) sg(E) mfd_core(E) i2c_i801(E) mei_me(E) tpm_tis(E) tpm(E) mei(E) joydev(E) serio_raw(E) nfs(E) fscache(E) arc4(E) brcmsmac(E) cordic(E) brcmutil(E) bcma(E) mac80211(E) cfg80211(E) rfkill(E) evdev(E) eeprom(E) tun(E) xt_recent(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_codec(E) snd_hda_core(E) snd_hwdep(E) zram(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) act_mirred(E) sch_fq_codel(E) xt_connmark(E) ifb(E) nf_conntrack_ipv6(E) nf_defrag_ipv6(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) zsmalloc(E) nf_conntrack(E) cls_cgroup(E) xt_cgroup(E) x_tables(E) coretemp(E) lz4_compress(E) bonding(E) ecryptfs(E) cbc(E) hmac(E)
Aug 14 12:14:07 morfikownia kernel:  encrypted_keys(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) parport_pc(E) ppdev(E) sunrpc(E) lp(E) parport(E) loop(E) autofs4(E) ext4(E) ecb(E) lrw(E) glue_helper(E) ablk_helper(E) cryptd(E) aes_x86_64(E) crc16(E) jbd2(E) mbcache(E) btrfs(E) crc32c_generic(E) xor(E) raid6_pq(E) xts(E) gf128mul(E) algif_skcipher(E) af_alg(E) dm_crypt(E) dm_mod(E) sr_mod(E) sd_mod(E) cdrom(E) hid_generic(E) usbhid(E) hid(E) psmouse(E) ahci(E) libahci(E) r8169(E) mii(E) libata(E) scsi_mod(E) i915(E) fjes(E) video(E) i2c_algo_bit(E) thermal(E) wmi(E) drm_kms_helper(E) drm(E) ehci_pci(E) ehci_hcd(E) usbcore(E) usb_common(E) button(E) [last unloaded: 8192eu]
Aug 14 12:14:07 morfikownia kernel: CPU: 0 PID: 36955 Comm: kworker/0:2 Tainted: G        WC OE   4.6.0-1-amd64 #1 Debian 4.6.4-1
Aug 14 12:14:07 morfikownia kernel: Hardware name: Hewlett-Packard HP G62 Notebook PC              /1439, BIOS F.48 11/09/2011
Aug 14 12:14:07 morfikownia kernel: Workqueue: usb_hub_wq hub_event [usbcore]
Aug 14 12:14:07 morfikownia kernel:  0000000000000286 00000000071d7865 ffffffff81311505 ffff88006aa27a38
Aug 14 12:14:07 morfikownia kernel:  0000000000000000 ffffffff8107a50e ffff8800280cd000 ffff88006aa27a90
Aug 14 12:14:07 morfikownia kernel:  ffff8800637b4a80 ffffc900004c2000 ffff8800280cd000 ffff8800637b4a80
Aug 14 12:14:07 morfikownia kernel: Call Trace:
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff81311505>] ? dump_stack+0x5c/0x77
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff8107a50e>] ? __warn+0xbe/0xe0
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff8107a58f>] ? warn_slowpath_fmt+0x5f/0x80
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff8126001c>] ? __xlate_proc_name+0x5c/0xa0
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff81260c31>] ? remove_proc_entry+0x171/0x180
Aug 14 12:14:07 morfikownia kernel:  [<ffffffffc0dcbf00>] ? rtw_adapter_proc_deinit+0x74/0x8a [8192eu]
Aug 14 12:14:07 morfikownia kernel:  [<ffffffffc0db774a>] ? rtw_ndev_uninit+0x3b/0x3d [8192eu]
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff814c2ebb>] ? rollback_registered_many+0x18b/0x300
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff814c3069>] ? rollback_registered+0x39/0x60
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff814c4050>] ? unregister_netdevice_queue+0x40/0x90
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff814c40b8>] ? unregister_netdev+0x18/0x20
Aug 14 12:14:07 morfikownia kernel:  [<ffffffffc0db7de1>] ? rtw_unregister_netdevs+0x40/0x5a [8192eu]
Aug 14 12:14:07 morfikownia kernel:  [<ffffffffc0db93b3>] ? rtw_dev_remove+0x32/0x88 [8192eu]
Aug 14 12:14:07 morfikownia kernel:  [<ffffffffc002272f>] ? usb_unbind_interface+0x7f/0x280 [usbcore]
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff8143f7da>] ? __device_release_driver+0x9a/0x150
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff8143f8ae>] ? device_release_driver+0x1e/0x30
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff8143ee79>] ? bus_remove_device+0xf9/0x170
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff8143b267>] ? device_del+0x127/0x250
Aug 14 12:14:07 morfikownia kernel:  [<ffffffffc0026eab>] ? usb_remove_ep_devs+0x1b/0x30 [usbcore]
Aug 14 12:14:07 morfikownia kernel:  [<ffffffffc00200ce>] ? usb_disable_device+0x7e/0x260 [usbcore]
Aug 14 12:14:07 morfikownia kernel:  [<ffffffffc0015e40>] ? usb_disconnect+0x90/0x280 [usbcore]
Aug 14 12:14:07 morfikownia kernel:  [<ffffffffc0011c64>] ? set_port_feature+0x44/0x50 [usbcore]
Aug 14 12:14:07 morfikownia kernel:  [<ffffffffc0018077>] ? hub_event+0x767/0x14f0 [usbcore]
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff81092dcd>] ? process_one_work+0x15d/0x410
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff810930cd>] ? worker_thread+0x4d/0x480
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff81093080>] ? process_one_work+0x410/0x410
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff81098f1d>] ? kthread+0xcd/0xf0
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff815c69b2>] ? ret_from_fork+0x22/0x40
Aug 14 12:14:07 morfikownia kernel:  [<ffffffff81098e50>] ? kthread_create_on_node+0x190/0x190
Aug 14 12:14:07 morfikownia kernel: ---[] end trace 0a9b61bbcf52d0e9 ]---
</ffffffff81098e50></ffffffff815c69b2></ffffffff81098f1d></ffffffff81093080></ffffffff810930cd></ffffffff81092dcd></ffffffffc0018077></ffffffffc0011c64></ffffffffc0015e40></ffffffffc00200ce></ffffffffc0026eab></ffffffff8143b267></ffffffff8143ee79></ffffffff8143f8ae></ffffffff8143f7da></ffffffffc002272f></ffffffffc0db93b3></ffffffffc0db7de1></ffffffff814c40b8></ffffffff814c4050></ffffffff814c3069></ffffffff814c2ebb></ffffffffc0db774a></ffffffffc0dcbf00></ffffffff81260c31></ffffffff8126001c></ffffffff8107a58f></ffffffff8107a50e></ffffffff81311505>

Here's the kernel version:



$ uname -a
Linux morfikownia 4.6.0-1-amd64 #1 SMP Debian 4.6.4-1 (2016-07-18) x86_64 GNU/Linux

该提问来源于开源项目:Mange/rtl8192eu-linux-driver

  • 点赞
  • 写回答
  • 关注问题
  • 收藏
  • 复制链接分享
  • 邀请回答

18条回答

  • weixin_39933508 weixin_39933508 5月前

    Even though it is a little late, I hope this tutorial will help you and others, especially new users in compiling this driver package, including how to make it work in kernel 4.9.x..

    Just copy the url and paste into a new tab or window:

    https://scdas141.wordpress.com/2017/01/28/how-to-compile-mangertl8192eu-linux-driver-driver/

    点赞 评论 复制链接分享
  • weixin_39664696 weixin_39664696 5月前

    The next Ubuntu version will ship with 4.10.x kernel, so I needed the work around from scdas141 to get the driver working. Thanks for the helpfull howto!

    点赞 评论 复制链接分享
  • weixin_39906192 weixin_39906192 5月前

    i did what scadas141 said with ArchLinux on kernel 4.10 and it didn't worked :/ did the same with KDE Neon on kernel 4.8 and worked

    点赞 评论 复制链接分享
  • weixin_39755952 weixin_39755952 5月前

    This works absolutely like a charm with TP-LINK TL-WN823N V2 WiFi adapter running on KDE neon 4.9.2 (based on Ubuntu 16 LTS) Kernel 4.8.

    点赞 评论 复制链接分享
  • weixin_39920403 weixin_39920403 5月前

    Hi guys, I've bought this adapter. After testing upstream new rtl8xxxu driver that locks me at 1MBit/s, I've started using the Realtek one; I've found and pushed a most recent version (v4.4.1), see mirrored Release Notes. Realtek supports linux-4.4.65 longterm, working stable at 130.0 MBit/s. I've patched differently from this repo for linux-4.7 to get compiled.

    点赞 评论 复制链接分享
  • weixin_39683172 weixin_39683172 5月前

    Hi,

    I've downloaded this one: https://github.com/masterzorag/RTL8192EU-linux compiled and installed the folder "rtl8192eu", after restart I'm locked at 1MBit/s upload speed.

    Running lsmod I see the "rtl8xxxu" module loaded, so, how can I install and load the Realtek one that had worked for you to unlock the 1MBit/s upload limit?

    (my kernel is 4.8.0-49-generic). Thanks

    点赞 评论 复制链接分享
  • weixin_39920403 weixin_39920403 5月前

    just

    sh
    rmmod rtl8xxxu
    modprobe 8192eu
    

    Maybe interface name will increment, check dmesg iwconfig if using WEXT, iw wlan0 link if using new CFG80211

    Also, linux-4.8.y seems EndOfLine, making linux-4.4.y more updated than it...

    点赞 评论 复制链接分享
  • weixin_39683172 weixin_39683172 5月前

    Hi, inside the folder "rtl8192eu" I run "make && make install", so I unload the module rtl8xxxu module with rmmod (succesfully), but when I try to load the 8192eu one I get:

    ~$ modprobe 8192eu modprobe: FATAL: Module 8192eu not found in directory /lib/modules/4.8.0-49-generic

    What I'm doing wrong? I'm using the files in: https://github.com/masterzorag/RTL8192EU-linux

    Bye!

    点赞 评论 复制链接分享
  • weixin_39920403 weixin_39920403 5月前

    You are good, just missing a step. After make install you should depmod -a to get modprobe see the newly installed module; Or, you can insmod the module providing full path; Also, consider building, installing and loading module as root or by sudo.

    点赞 评论 复制链接分享
  • weixin_39920403 weixin_39920403 5月前

    , you are running linux-4.8.y that is not officially supported by Realtek driver; We have to patch the code to get it ported and I've patch for linux-4.7; You should move to linux-4.4.y to get it working as it should, use you package manager to get it;

    If you want to try my edits for linux-4.7 you have to git checkout linux-4.7 from my repo, then build, install and load since fixes are in a separate branch. Check this one

    点赞 评论 复制链接分享
  • weixin_39837105 weixin_39837105 5月前

    , maybe you should continue the discussion on a new issue The compilation problems with 4.8 are not related to this repo Will be more easy to track for future references if someone open a issue directly on https://github.com/masterzorag/RTL8192EU-linux/issues

    点赞 评论 复制链接分享
  • weixin_39867893 weixin_39867893 5月前

    I have the same adapter TL-WN823N v2

    Kernel - 4.9.34-1-lts Arch Linux

    The dongle was detected by the default rtl8xxxu module, but the light didn't come on, and I was unable to actually connect to a network.

    Using this repo, everything seems to work fine for now. I blacklisted the inbuilt 8xxxu module to force the 8192eu to load.

    Initially, I got a lot of journal spam

    Jul 02 17:33:33 lucy kernel: RTL871X: rtl8192e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0 Jul 02 17:33:35 lucy kernel: RTL871X: rtw_set_ps_mode(wifi1) Enter 802.11 power save - WIFI-TRAFFIC_IDLE Jul 02 17:33:35 lucy kernel: RTL871X: rtl8192e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0 Jul 02 17:33:40 lucy kernel: RTL871X: rtw_set_ps_mode(wifi1) Leave 802.11 power save - WIFI-TRAFFIC_BUSY Jul 02 17:33:40 lucy kernel: RTL871X: rtl8192e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0 Jul 02 17:33:42 lucy kernel: RTL871X: rtw_set_ps_mode(wifi1) Enter 802.11 power save - WIFI-TRAFFIC_IDLE Jul 02 17:33:42 lucy kernel: RTL871X: rtl8192e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0 Jul 02 17:33:46 lucy kernel: RTL871X: rtw_set_ps_mode(wifi1) Leave 802.11 power save - WIFI-TRAFFIC_BUSY Jul 02 17:33:46 lucy kernel: RTL871X: rtl8192e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0 Jul 02 17:33:48 lucy kernel: RTL871X: rtw_set_ps_mode(wifi1) Enter 802.11 power save - WIFI-TRAFFIC_IDLE Jul 02 17:33:48 lucy kernel: RTL871X: rtl8192e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0 Jul 02 17:33:50 lucy kernel: RTL871X: rtw_set_ps_mode(wifi1) Leave 802.11 power save - WIFI-TRAFFIC_BUSY Jul 02 17:33:50 lucy kernel: RTL871X: rtl8192e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0

    adding the following to /etc/modprobe.d/8192.conf stopped those

    options 8192eu rtw_power_mgnt=0 rtw_enusbss=0

    (I don't thing rtl_enusbss=0 is required, because it already defaults to 0)

    I do however get some more messages like the following

    Jul 02 21:50:23 lucy kernel: RTL871X: UpdateHalRAMask8192E => mac_id:0, networkType:0x03, mask:0x00000fff Jul 02 21:50:23 lucy kernel: RTL871X: rtl8192e_set_raid_cmd, bitmap=0xff0, mac_id=0x0, raid=0x6, shortGIrate=0 Jul 02 21:50:38 lucy kernel: RTL871X: UpdateHalRAMask8192E => mac_id:0, networkType:0x03, mask:0x00000fff Jul 02 21:50:38 lucy kernel: RTL871X: rtl8192e_set_raid_cmd, bitmap=0xff5, mac_id=0x0, raid=0x6, shortGIrate=0 Jul 02 21:50:48 lucy kernel: RTL871X: UpdateHalRAMask8192E => mac_id:0, networkType:0x03, mask:0x00000fff Jul 02 21:50:48 lucy kernel: RTL871X: rtl8192e_set_raid_cmd, bitmap=0xff0, mac_id=0x0, raid=0x6, shortGIrate=0 Jul 02 21:51:48 lucy kernel: RTL871X: UpdateHalRAMask8192E => mac_id:0, networkType:0x03, mask:0x00000fff Jul 02 21:51:48 lucy kernel: RTL871X: rtl8192e_set_raid_cmd, bitmap=0xff5, mac_id=0x0, raid=0x6, shortGIrate=0 Jul 02 21:52:34 lucy kernel: RTL871X: UpdateHalRAMask8192E => mac_id:0, networkType:0x03, mask:0x00000fff

    Not sure how to get rid of them.

    Another issue is that iw does not detect the device. It must be a wext/cfg issue. I am connected to the internet, but iw lists no devices.

    Thanks for this repo. :)

    点赞 评论 复制链接分享
  • weixin_39837105 weixin_39837105 5月前

    Fixed on realtek-4.4.x branch as commented by

    点赞 评论 复制链接分享
  • weixin_39604139 weixin_39604139 5月前

    I have the same device TL-WN823N v2

    I am on Kernel Version 4.18.0. Following is the output of trying to install this driver as a kernel module, the build seems to go through fine, but it fails to update initramfs for some reason (I am a noob at building kernel modules) and rollsback.

    Any help would be appreciated.

    sh
    $ sudo dkms install rtl8192eu/1.0;                                                                                                                                                                                                                                   node-1[60/92]
    
    Kernel preparation unnecessary for this kernel.  Skipping...                                                                                                                                                                                                                      
    
    Building module:                                                                                                                                                                                                                                                                  
    cleaning build area...                                                                                                                                                                                                                                                            
    'make' all KVER=4.18.0-11-generic..........................................                                                                                                                                                                                                       
    cleaning build area...                                                                                                                                                                                                                                                            
    
    DKMS: build completed.                                                                                                                                                                                                                                                            
    
    8192eu.ko:                                                                                                                                                                                                                                                                        
    Running module version sanity check.                                                                                                                                                                                                                                              
     - Original module                                                                                                                                                                                                                                                                
       - No original module exists within this kernel                                                                                                                                                                                                                                 
     - Installation                                                                                                                                                                                                                                                                   
       - Installing to /lib/modules/4.18.0-11-generic/updates/dkms/                                                                                                                                                                                                                   
    
    depmod....                                                                                                                                                                                                                                                                        
    
    Backing up initrd.img-4.18.0-11-generic to /boot/initrd.img-4.18.0-11-generic.old-dkms                                                                                                                                                                                            
    Making new initrd.img-4.18.0-11-generic                                                                                                                                                                                                                                           
    (If next boot fails, revert to initrd.img-4.18.0-11-generic.old-dkms image)                                                                                                                                                                                                       
    update-initramfs......(bad exit status: 1)                                                                                                                                                                                                                                        
    
    -------- Uninstall Beginning --------                                                                                                                                                                                                                                             
    Module:  rtl8192eu                                                                                                                                                                                                                                                                
    Version: 1.0                                                                                                                                                                                                                                                                      
    Kernel:  4.18.0-11-generic (x86_64)                                                                                                                                                                                                                                               
    -------------------------------------                                                                                                                                                                                                                                             
    
    Status: Before uninstall, this module version was ACTIVE on this kernel.                                                                                                                                                                                                          
    
    8192eu.ko:                                                                                                                                                                                                                                                                        
     - Uninstallation                                                                                                                                                                                                                                                                 
       - Deleting from: /lib/modules/4.18.0-11-generic/updates/dkms/                                                                                                                                                                                                                  
     - Original module                                                                                                                                                                                                                                                                
       - No original module was found for this module on this kernel.                                                                                                                                                                                                                 
       - Use the dkms install command to reinstall any previous module version.                                                                                                                                                                                                       
    
    depmod...                                                                                                                                                                                                                                                                         
    
    Backing up initrd.img-4.18.0-11-generic to /boot/initrd.img-4.18.0-11-generic.old-dkms                                                                                                                                                                                            
    Making new initrd.img-4.18.0-11-generic                                                                                                                                                                                                                                           
    (If next boot fails, revert to initrd.img-4.18.0-11-generic.old-dkms image)                                                                                                                                                                                                       
    update-initramfs.....(bad exit status: 1)                                                                                                                                                                                                                                         
    Warning: There was a problem remaking your initrd.  You must manually remake it                                                                                                                                                                                                   
    before booting into this kernel.                                                                                                                                                                                                                                                  
    
    DKMS: uninstall completed.                                                                                                                                                                                                                                                        
    Error! Problems with mkinitrd detected.  Automatically uninstalling this module.                                                                                                                                                                                                  
    DKMS: Install Failed (mkinitrd problems).  Module rolled back to built state.
    
    点赞 评论 复制链接分享
  • weixin_39965490 weixin_39965490 5月前

    Hi, I have the device TL-WN823N v2, and I was facing the same problem that everyone is facing with ubuntu 16.04 LTS. After googling, i followed steps on forums and reached Pilot6 page and got the 4.4 driver..which worked great. But after downloading the ubuntu updates, twice my driver broke. This time i searched further and found this link.. and followed the steps. It is working great now ..and with increased performance. The wifi signal shows increased strength network signal is increased too.

    I have one query though, in future ..should i download standard updates or not? And since you blocked the 8xxxeu driver ..can this problem reappear? Thanks!

    My unbutu details: Linux ubuntu16 4.15.0-43-generic #46~16.04.1-Ubuntu SMP Fri Dec 7 13:30:54 UTC 2018 i686 i686 i686 GNU/Linux

    点赞 评论 复制链接分享
  • weixin_39604139 weixin_39604139 5月前

    This problem can reappear. However, since you are compiling specific drivers for the hardware manually to get it working (and it does work), it would be advisable to disable the standard updates.

    点赞 评论 复制链接分享
  • weixin_39619170 weixin_39619170 5月前

    Thank you for letting us know.

    Den sön 14 aug. 2016 12:17Mikhail Morfikov notifications.com skrev:

    I've been testing this driver for a few days, and I can tell that it works nice with TP-LINK TL-WN823N V2 WiFi adapter . I've got transfer around 170 mbit/s. There's a few problems with replugging/unplugging the device. I always get the following log:

    Aug 14 12:14:07 morfikownia kernel: ------------[] cut here ]------------ Aug 14 12:14:07 morfikownia kernel: WARNING: CPU: 0 PID: 36955 at /build/linux-aOJbQa/linux-4.6.4/fs/proc/generic.c:564 remove_proc_entry+0x171/0x180 Aug 14 12:14:07 morfikownia kernel: name 'wlan20' Aug 14 12:14:07 morfikownia kernel: Modules linked in: 8192eu(OE) veth(E) nls_utf8(E) nls_cp437(E) vfat(E) fat(E) uas(E) usb_storage(E) fuse(E) cpuid(E) cpufreq_conservative(E) cpufreq_userspace(E) cpufreq_powersave(E) cpufreq_stats(E) bridge(E) stp(E) llc(E) drbg(E) ansi_cprng(E) ctr(E) ccm(E) nf_log_ipv4(E) nf_log_common(E) xt_LOG(E) xt_limit(E) xt_pkttype(E) ipt_REJECT(E) nf_reject_ipv4(E) ipt_SYNPROXY(E) nf_synproxy_core(E) xt_conntrack(E) nf_conntrack_netlink(E) iptable_filter(E) ipt_MASQUERADE(E) nf_nat_masquerade_ipv4(E) iptable_nat(E) nf_nat_ipv4(E) nf_nat(E) xt_TCPMSS(E) xt_comment(E) xt_statistic(E) xt_owner(E) xt_mark(E) iptable_mangle(E) xt_tcpudp(E) xt_CT(E) xt_multiport(E) xt_set(E) iptable_raw(E) ip_tables(E) hid_a4tech(E) iTCO_wdt(E) iTCO_vendor_support(E) ip_set_hash_ip(E) ip_set_hash_net(E) acpi_cpufreq(E) Aug 14 12:14:07 morfikownia kernel: ip_set(E) nfnetlink(E) battery(E) ac(E) intel_powerclamp(E) lpc_ich(E) processor(E) hp_wmi(E) sparse_keymap(E) shpchp(E) sg(E) mfd_core(E) i2c_i801(E) mei_me(E) tpm_tis(E) tpm(E) mei(E) joydev(E) serio_raw(E) nfs(E) fscache(E) arc4(E) brcmsmac(E) cordic(E) brcmutil(E) bcma(E) mac80211(E) cfg80211(E) rfkill(E) evdev(E) eeprom(E) tun(E) xt_recent(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_codec(E) snd_hda_core(E) snd_hwdep(E) zram(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) act_mirred(E) sch_fq_codel(E) xt_connmark(E) ifb(E) nf_conntrack_ipv6(E) nf_defrag_ipv6(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) zsmalloc(E) nf_conntrack(E) cls_cgroup(E) xt_cgroup(E) x_tables(E) coretemp(E) lz4_compress(E) bonding(E) ecryptfs(E) cbc(E) hmac(E) Aug 14 12:14:07 morfikownia kernel: encrypted_keys(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) parport_pc(E) ppdev(E) sunrpc(E) lp(E) parport(E) loop(E) autofs4(E) ext4(E) ecb(E) lrw(E) glue_helper(E) ablk_helper(E) cryptd(E) aes_x86_64(E) crc16(E) jbd2(E) mbcache(E) btrfs(E) crc32c_generic(E) xor(E) raid6_pq(E) xts(E) gf128mul(E) algif_skcipher(E) af_alg(E) dm_crypt(E) dm_mod(E) sr_mod(E) sd_mod(E) cdrom(E) hid_generic(E) usbhid(E) hid(E) psmouse(E) ahci(E) libahci(E) r8169(E) mii(E) libata(E) scsi_mod(E) i915(E) fjes(E) video(E) i2c_algo_bit(E) thermal(E) wmi(E) drm_kms_helper(E) drm(E) ehci_pci(E) ehci_hcd(E) usbcore(E) usb_common(E) button(E) [last unloaded: 8192eu] Aug 14 12:14:07 morfikownia kernel: CPU: 0 PID: 36955 Comm: kworker/0:2 Tainted: G WC OE 4.6.0-1-amd64 #1 Debian 4.6.4-1 Aug 14 12:14:07 morfikownia kernel: Hardware name: Hewlett-Packard HP G62 Notebook PC /1439, BIOS F.48 11/09/2011 Aug 14 12:14:07 morfikownia kernel: Workqueue: usb_hub_wq hub_event [usbcore] Aug 14 12:14:07 morfikownia kernel: 0000000000000286 00000000071d7865 ffffffff81311505 ffff88006aa27a38 Aug 14 12:14:07 morfikownia kernel: 0000000000000000 ffffffff8107a50e ffff8800280cd000 ffff88006aa27a90 Aug 14 12:14:07 morfikownia kernel: ffff8800637b4a80 ffffc900004c2000 ffff8800280cd000 ffff8800637b4a80 Aug 14 12:14:07 morfikownia kernel: Call Trace: Aug 14 12:14:07 morfikownia kernel: [] ? dump_stack+0x5c/0x77 Aug 14 12:14:07 morfikownia kernel: [] ? __warn+0xbe/0xe0 Aug 14 12:14:07 morfikownia kernel: [] ? warn_slowpath_fmt+0x5f/0x80 Aug 14 12:14:07 morfikownia kernel: [] ? __xlate_proc_name+0x5c/0xa0 Aug 14 12:14:07 morfikownia kernel: [] ? remove_proc_entry+0x171/0x180 Aug 14 12:14:07 morfikownia kernel: [] ? rtw_adapter_proc_deinit+0x74/0x8a [8192eu] Aug 14 12:14:07 morfikownia kernel: [] ? rtw_ndev_uninit+0x3b/0x3d [8192eu] Aug 14 12:14:07 morfikownia kernel: [] ? rollback_registered_many+0x18b/0x300 Aug 14 12:14:07 morfikownia kernel: [] ? rollback_registered+0x39/0x60 Aug 14 12:14:07 morfikownia kernel: [] ? unregister_netdevice_queue+0x40/0x90 Aug 14 12:14:07 morfikownia kernel: [] ? unregister_netdev+0x18/0x20 Aug 14 12:14:07 morfikownia kernel: [] ? rtw_unregister_netdevs+0x40/0x5a [8192eu] Aug 14 12:14:07 morfikownia kernel: [] ? rtw_dev_remove+0x32/0x88 [8192eu] Aug 14 12:14:07 morfikownia kernel: [] ? usb_unbind_interface+0x7f/0x280 [usbcore] Aug 14 12:14:07 morfikownia kernel: [] ? __device_release_driver+0x9a/0x150 Aug 14 12:14:07 morfikownia kernel: [] ? device_release_driver+0x1e/0x30 Aug 14 12:14:07 morfikownia kernel: [] ? bus_remove_device+0xf9/0x170 Aug 14 12:14:07 morfikownia kernel: [] ? device_del+0x127/0x250 Aug 14 12:14:07 morfikownia kernel: [] ? usb_remove_ep_devs+0x1b/0x30 [usbcore] Aug 14 12:14:07 morfikownia kernel: [] ? usb_disable_device+0x7e/0x260 [usbcore] Aug 14 12:14:07 morfikownia kernel: [] ? usb_disconnect+0x90/0x280 [usbcore] Aug 14 12:14:07 morfikownia kernel: [] ? set_port_feature+0x44/0x50 [usbcore] Aug 14 12:14:07 morfikownia kernel: [] ? hub_event+0x767/0x14f0 [usbcore] Aug 14 12:14:07 morfikownia kernel: [] ? process_one_work+0x15d/0x410 Aug 14 12:14:07 morfikownia kernel: [] ? worker_thread+0x4d/0x480 Aug 14 12:14:07 morfikownia kernel: [] ? process_one_work+0x410/0x410 Aug 14 12:14:07 morfikownia kernel: [] ? kthread+0xcd/0xf0 Aug 14 12:14:07 morfikownia kernel: [] ? ret_from_fork+0x22/0x40 Aug 14 12:14:07 morfikownia kernel: [] ? kthread_create_on_node+0x190/0x190 Aug 14 12:14:07 morfikownia kernel: ---[] end trace 0a9b61bbcf52d0e9 ]---

    Here's the kernel version:

    $ uname -a Linux morfikownia 4.6.0-1-amd64 #1 SMP Debian 4.6.4-1 (2016-07-18) x86_64 GNU/Linux

    — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Mange/rtl8192eu-linux-driver/issues/10, or mute the thread https://github.com/notifications/unsubscribe-auth/AAAGP3CoF-EoF7qSM-bN54fJQoEO2hciks5qfutDgaJpZM4Jj3if .

    点赞 评论 复制链接分享
  • weixin_39944233 weixin_39944233 5月前

    Hi, I am a newbie. I wish you could tell me how to make the wireless adapter work. Regards,

    点赞 评论 复制链接分享

相关推荐