linux rtl8189 wifi模块配制

我的嵌入式开发板是TQ210,板载S5PV210芯片,WIFI模块是RTL8189ES,SDIO接口,模块驱动是RTL8189ES_linux_v4.3.18.1_15373.20151005。
插入WIFI模块提示以下信息:

 [root@$zjh: 34th_rtl8189es]# mmc3: new high speed SDIO card at address 0001

安装驱动,提示以下信息:

 [root@$zjh: 34th_rtl8189es]# insmod 8189es.ko 
RTL871X: module init start
RTL871X: rtl8189es v4.3.18.1_15373.20151005
RTL871X: build time: Dec  4 2017 10:59:30
RTL871X: CHIP TYPE: RTL8188E
RTL871X: rtw_hal_config_rftype RF_Type is 3 TotalTxPath is 1 
RTL871X: Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
RTL871X: EEPROM type is E-FUSE
RTL871X: =>_CardEnable
RTL871X: SetHwReg8188E: bMacPwrCtrlOn=1
RTL871X: <=_CardEnable
RTL871X: _ReadPROMContent: 9346CR=0x20, Boot from EFUSE, Autoload OK
RTL871X: =>_InitPowerOn_8188ES
RTL871X: =>_CardEnable
RTL871X: =>_CardEnable bMacPwrCtrlOn == _TRUE do nothing !!
RTL871X: <=_CardEnable
RTL871X: <=_InitPowerOn_8188ES
bFWReady == _FALSE call reset 8051...
RTL871X: =====> _8051Reset88E(): 8051 reset success .
RTL871X: efuse_read_phymap_from_txpktbuf bcnhead:0
RTL871X: efuse_read_phymap_from_txpktbuf len:162, lenbak:162, aaa:162, aaabak:162
RTL871X: efuse_read_phymap_from_txpktbuf read count:160
RTL871X: EEPROM ID=0x8129
RTL871X: Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
RTL871X: ### PS params=>  power_mgnt(2),usbss_enable(0) ###
RTL871X: ======= Path 0, Channel 1 =======
RTL871X: Index24G_CCK_Base[0][1] = 0x2c
RTL871X: Index24G_BW40_Base[0][1] = 0x29
RTL871X: ======= Path 0, Channel 2 =======
RTL871X: Index24G_CCK_Base[0][2] = 0x2c
RTL871X: Index24G_BW40_Base[0][2] = 0x29
RTL871X: ======= Path 0, Channel 3 =======
RTL871X: Index24G_CCK_Base[0][3] = 0x2c
RTL871X: Index24G_BW40_Base[0][3] = 0x29
RTL871X: ======= Path 0, Channel 4 =======
RTL871X: Index24G_CCK_Base[0][4] = 0x2c
RTL871X: Index24G_BW40_Base[0][4] = 0x29
RTL871X: ======= Path 0, Channel 5 =======
RTL871X: Index24G_CCK_Base[0][5] = 0x2c
RTL871X: Index24G_BW40_Base[0][5] = 0x29
RTL871X: ======= Path 0, Channel 6 =======
RTL871X: Index24G_CCK_Base[0][6] = 0x2c
RTL871X: Index24G_BW40_Base[0][6] = 0x29
RTL871X: ======= Path 0, Channel 7 =======
RTL871X: Index24G_CCK_Base[0][7] = 0x2c
RTL871X: Index24G_BW40_Base[0][7] = 0x29
RTL871X: ======= Path 0, Channel 8 =======
RTL871X: Index24G_CCK_Base[0][8] = 0x2c
RTL871X: Index24G_BW40_Base[0][8] = 0x29
RTL871X: ======= Path 0, Channel 9 =======
RTL871X: Index24G_CCK_Base[0][9] = 0x2c
RTL871X: Index24G_BW40_Base[0][9] = 0x29
RTL871X: ======= Path 0, Channel 10 =======
RTL871X: Index24G_CCK_Base[0][10] = 0x2c
RTL871X: Index24G_BW40_Base[0][10] = 0x29
RTL871X: ======= Path 0, Channel 11 =======
RTL871X: Index24G_CCK_Base[0][11] = 0x2c
RTL871X: Index24G_BW40_Base[0][11] = 0x29
RTL871X: ======= Path 0, Channel 12 =======
RTL871X: Index24G_CCK_Base[0][12] = 0x2c
RTL871X: Index24G_BW40_Base[0][12] = 0x29
RTL871X: ======= Path 0, Channel 13 =======
RTL871X: Index24G_CCK_Base[0][13] = 0x2c
RTL871X: Index24G_BW40_Base[0][13] = 0x29
RTL871X: ======= Path 0, Channel 14 =======
RTL871X: Index24G_CCK_Base[0][14] = 0x2c
RTL871X: Index24G_BW40_Base[0][14] = 0x29
RTL871X: ======= TxCount 0 =======
RTL871X: CCK_24G_Diff[0][0]= 0
RTL871X: OFDM_24G_Diff[0][0]= 1
RTL871X: BW20_24G_Diff[0][0]= 1
RTL871X: BW40_24G_Diff[0][0]= 0
RTL871X: EEPROMRegulatory = 0x0
RTL871X: mlmepriv.ChannelPlan = 0x08
RTL871X: CrystalCap: 0x3f
RTL871X: EEPROM Customer ID: 0x 0
RTL871X: Board Type: 0x 0
RTL871X: ThermalMeter = 0x1a
RTL871X: pHalData->EEPROMRFGainVal=0
RTL871X: Hal_ReadRFGainOffset => EEPRORFGainOffset = 0x00,EEPROMRFGainVal=0x00,thermal_offset:0x00 
RTL871X: <==== ReadAdapterInfo8188ES in 260 ms
RTL871X: Hal_ChannelPlanToRegulation ChannelPlan:0x08,Regulation(2_4G/5G):0x03,0x03
RTL871X: init_channel_set ChannelPlan ID 8 Chan num:14  
RTL871X: rtw_alloc_macid((null)) if1, hwaddr:ff:ff:ff:ff:ff:ff macid:1
RTL871X: rtw_macaddr_cfg mac addr:ac:a2:13:5f:f0:30
RTL871X: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0
RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=ac:a2:13:5f:f0:30
RTL871X: module init ret=0
[root@$zjh: 34th_rtl8189es]# 

打开WLAN0,提示以下信息:

 [root@$zjh: 34th_rtl8189es]# ifconfig wlan0 up
RTL871X: +871x_drv - drv_open, bup=0
RTL871X: +rtl8188es_hal_init
RTL871X: FW does not exit before power on!!
RTL871X: =>_InitPowerOn_8188ES
RTL871X: =>_CardEnable
RTL871X: =>_CardEnable bMacPwrCtrlOn == _TRUE do nothing !!
RTL871X: <=_CardEnable
RTL871X: <=_InitPowerOn_8188ES
RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
RTL871X: PowerOnCheck: 0x1B8 test Pass.
RTL871X: Power on ok!
RTL871X: _init_available_page_threshold(): Enable Tx FIFO Page Threshold H:0x4f4f,N:0x4f4f,L:0x5454
RTL871X: rtl8188e_FirmwareDownload fw:NIC, size: 15414
RTL871X: rtl8188e_FirmwareDownload: fw_ver=16 fw_subver=0000 sig=0x88e1, Month=11, Date=58, Hour=16, Minute=3c
RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00030005
RTL871X: =====> _8051Reset88E(): 8051 reset success .
RTL871X: _FWFreeToGo: Polling FW ready OK! (20, 5ms), REG_MCUFWDL:0x000300c6
RTL871X: FWDL success. write_fw:1, 155ms
==> rtl8188e_iol_efuse_patch 
RTL871X: HalDetectPwrDownMode(): PDN=0
RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
RTL871X: pDM_Odm TxPowerTrackControl = 1
RTL871X: DISABLE_BB_RF=0
RTL871X: IS_HARDWARE_TYPE_8188ES=1
RTL871X: -rtl8188es_hal_init
RTL871X: rtl8188es_hal_init in 665ms
RTL871X: wlan0Port-0  set opmode = 2
RTL871X: Using the default RF gain.
RTL871X: MAC Address = ac:a2:13:5f:f0:30
RTL871X: -871x_drv - drv_open, bup=1
RTL871X: start rtl8188es_xmit_thread
[root@$zjh: 34th_rtl8189es]# RTL871X: ==>rtw_ps_processor .fw_state(8)
RTL871X: ==>ips_enter cnts:1
RTL871X: nolinked power save enter
RTL871X: ===> rtw_ips_pwr_down...................
RTL871X: ====> rtw_ips_dev_unload...
RTL871X: =>rtl8188es_hal_deinit
RTL871X: =>hal_poweroff_8188es
RTL871X: SetHwReg8188E: bMacPwrCtrlOn=0
RTL871X: SetHwReg8188E: bMacPwrCtrlOn=0
RTL871X: <=hal_poweroff_8188es
RTL871X: <=rtl8188es_hal_deinit
RTL871X: <=== rtw_ips_pwr_down..................... in 15ms

[root@$zjh: 34th_rtl8189es]# 

但是确找不到无线接入点,如下:

 [root@$zjh: 34th_rtl8189es]# iwconfig 
wlan0     no wireless extensions.

lo        no wireless extensions.

eth0      no wireless extensions.

扫描信号的话,提示如下:

 [root@$zjh: 34th_rtl8189es]# iwlist wlan0 scan
wlan0     Interface doesn't support scanning.

这是为什么啊,哪位大神给指点一下,谢谢。

1个回答

这个你可能要找原厂支持

Csdn user default icon
上传中...
上传图片
插入图片
抄袭、复制答案,以达到刷声望分或其他目的的行为,在CSDN问答是严格禁止的,一经发现立刻封号。是时候展现真正的技术了!
其他相关推荐
Python+OpenCV计算机视觉

Python+OpenCV计算机视觉

请教:在Linux3.0.8 移植usb wifi驱动rtl8189es

在Linux3.0.8 移植usb wifi驱动rtl8189es, 采用的非模块加载,直接编进kernel一起烧录; 目前卡在: 不会出现 usbcore: registered new interface driver rtl8189es SDIO卡已经初始化和识卡成功; [ 3.035470] mmc1: new high speed SDIO card at address 0001 网络设备已成功初始化和注册: [ 4.025589] RTL871X: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0 [ 4.043041] RTL871X: rtw_wiphy_alloc(phy0) [ 4.051457] RTL871X: rtw_wdev_alloc(padapter=c000e000) [ 4.061990] rtw_os_ndevs_register:2303!! [ 4.072513] RTL871X: rtw_wiphy_register(phy0) [ 4.081850] rtw_os_ndev_register:999!! [ 4.092123] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=8c:18:d9:c0:ef:ff LOG如下: [ 3.014338] lib80211: common routines for IEEE802.11 drivers [ 3.035470] mmc1: new high speed SDIO card at address 0001 [ 3.047162] rtw_drv_init:700!! $$$$$$$$$$$$$$$$$$$$$$$ [ 3.060186] RTL871X: CHIP TYPE: RTL8188E [ 3.069330] RTL871X: rtw_hal_config_rftype RF_Type is 3 TotalTxPath is 1 [ 3.083356] RTL871X: Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_K_CUT_1T1R_RomVer(0) [ 3.099996] RTL871X: EEPROM type is E-FUSE [ 3.108397] RTL871X: =>_CardEnable [ 3.120635] RTL871X: SetHwReg8188E: bMacPwrCtrlOn=1 [ 3.130640] RTL871X: <=_CardEnable [ 3.137641] RTL871X: _ReadPROMContent: 9346CR=0x20, Boot from EFUSE, Autoload OK [ 3.152928] RTL871X: =>_InitPowerOn_8188ES [ 3.161329] RTL871X: =>_CardEnable [ 3.168278] RTL871X: =>_CardEnable bMacPwrCtrlOn == _TRUE do nothing !! [ 3.181843] snd_switch_probe susccess [ 3.189705] RTL871X: ## wifi_probe [ 3.196745] RTL871X: <=_CardEnable [ 3.203833] RTL871X: wifi_set_power = 1 [ 3.211725] RTL871X: wifi_set_carddetect = 1 [ 3.220555] RTL871X: <=_InitPowerOn_8188ES [ 3.229075] wlan_device_init:72!! [ 3.238438] bFWReady == _FALSE call reset 8051... [ 3.248576] /proc/exmap: insert [ 3.255463] jz-rtc jz-rtc.0: setting system clock to 2016-02-01 13:30:00 UTC (1454333400) [ 3.272496] RTL871X: =====> _8051Reset88E(): 8051 reset success . [ 3.306544] RTL871X: efuse_read_phymap_from_txpktbuf bcnhead:0 [ 3.318726] RTL871X: efuse_read_phymap_from_txpktbuf len:170, lenbak:170, aaa:170, aaabak:170 [ 3.338442] RTL871X: efuse_read_phymap_from_txpktbuf read count:168 [ 3.351416] RTL871X: EEPROM ID=0x8129 [ 3.358912] RTL871X: Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0) [ 3.379234] RTL871X: ### PS params=> power_mgnt(0),usbss_enable(0) ### [ 3.392788] RTL871X: ======= Path 0, Channel 1 ======= [ 3.403312] RTL871X: Index24G_CCK_Base[0][1] = 0x29 [ 3.413302] RTL871X: Index24G_BW40_Base[0][1] = 0x2d [ 3.423471] RTL871X: ======= Path 0, Channel 2 ======= [ 3.433994] RTL871X: Index24G_CCK_Base[0][2] = 0x29 [ 3.443981] RTL871X: Index24G_BW40_Base[0][2] = 0x2d [ 3.454145] RTL871X: ======= Path 0, Channel 3 ======= [ 3.464669] RTL871X: Index24G_CCK_Base[0][3] = 0x29 [ 3.474657] RTL871X: Index24G_BW40_Base[0][3] = 0x2d [ 3.484823] RTL871X: ======= Path 0, Channel 4 ======= [ 3.495343] RTL871X: Index24G_CCK_Base[0][4] = 0x29 [ 3.505332] RTL871X: Index24G_BW40_Base[0][4] = 0x2d [ 3.515500] RTL871X: ======= Path 0, Channel 5 ======= [ 3.526026] RTL871X: Index24G_CCK_Base[0][5] = 0x29 [ 3.536014] RTL871X: Index24G_BW40_Base[0][5] = 0x2d [ 3.546181] RTL871X: ======= Path 0, Channel 6 ======= [ 3.556704] RTL871X: Index24G_CCK_Base[0][6] = 0x28 [ 3.566692] RTL871X: Index24G_BW40_Base[0][6] = 0x2c [ 3.576860] RTL871X: ======= Path 0, Channel 7 ======= [ 3.587384] RTL871X: Index24G_CCK_Base[0][7] = 0x28 [ 3.597371] RTL871X: Index24G_BW40_Base[0][7] = 0x2c [ 3.607539] RTL871X: ======= Path 0, Channel 8 ======= [ 3.618064] RTL871X: Index24G_CCK_Base[0][8] = 0x28 [ 3.628052] RTL871X: Index24G_BW40_Base[0][8] = 0x2c [ 3.638220] RTL871X: ======= Path 0, Channel 9 ======= [ 3.648741] RTL871X: Index24G_CCK_Base[0][9] = 0x28 [ 3.658731] RTL871X: Index24G_BW40_Base[0][9] = 0x2c [ 3.668899] RTL871X: ======= Path 0, Channel 10 ======= [ 3.679598] RTL871X: Index24G_CCK_Base[0][10] = 0x28 [ 3.689769] RTL871X: Index24G_BW40_Base[0][10] = 0x2c [ 3.700116] RTL871X: ======= Path 0, Channel 11 ======= [ 3.710819] RTL871X: Index24G_CCK_Base[0][11] = 0x28 [ 3.720985] RTL871X: Index24G_BW40_Base[0][11] = 0x2c [ 3.731335] RTL871X: ======= Path 0, Channel 12 ======= [ 3.742036] RTL871X: Index24G_CCK_Base[0][12] = 0x28 [ 3.752200] RTL871X: Index24G_BW40_Base[0][12] = 0x2c [ 3.762547] RTL871X: ======= Path 0, Channel 13 ======= [ 3.773250] RTL871X: Index24G_CCK_Base[0][13] = 0x28 [ 3.783417] RTL871X: Index24G_BW40_Base[0][13] = 0x2c [ 3.793759] RTL871X: ======= Path 0, Channel 14 ======= [ 3.804460] RTL871X: Index24G_CCK_Base[0][14] = 0x26 [ 3.814627] RTL871X: Index24G_BW40_Base[0][14] = 0x2c [ 3.824970] RTL871X: ======= TxCount 0 ======= [ 3.834074] RTL871X: CCK_24G_Diff[0][0]= 0 [ 3.842462] RTL871X: OFDM_24G_Diff[0][0]= 0 [ 3.851030] RTL871X: BW20_24G_Diff[0][0]= -2 [ 3.859752] RTL871X: BW40_24G_Diff[0][0]= 0 [ 3.868316] RTL871X: EEPROMRegulatory = 0x0 [ 3.876879] RTL871X: mlmepriv.ChannelPlan = 0x20 [ 3.886337] RTL871X: CrystalCap: 0x21 [ 3.893832] RTL871X: EEPROM Customer ID: 0x 0 [ 3.902751] RTL871X: Board Type: 0x 0 [ 3.910233] RTL871X: ThermalMeter = 0x1d [ 3.918261] RTL871X: pHalData->EEPROMRFGainVal=0 [ 3.927719] RTL871X: Hal_ReadRFGainOffset => EEPRORFGainOffset = 0x00,EEPROMRFGainVal=0x00,thermal_offset:0x00 [ 3.948385] RTL871X: <==== ReadAdapterInfo8188ES in 810 ms [ 3.960863] RTL871X: Hal_ChannelPlanToRegulation ChannelPlan:0x20,Regulation(2_4G/5G):0x03,0x03 [ 3.978841] RTL871X: init_channel_set ChannelPlan ID 20 Chan num:13 [ 3.997409] RTL871X: rtw_alloc_macid((null)) if1, hwaddr:ff:ff:ff:ff:ff:ff macid:1 [ 4.013347] RTL871X: rtw_macaddr_cfg mac addr:8c:18:d9:c0:ef:ff [ 4.025589] RTL871X: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0 [ 4.043041] RTL871X: rtw_wiphy_alloc(phy0) [ 4.051457] RTL871X: rtw_wdev_alloc(padapter=c000e000) [ 4.061990] rtw_os_ndevs_register:2303!! [ 4.072513] RTL871X: rtw_wiphy_register(phy0) [ 4.081850] rtw_os_ndev_register:999!! [ 4.092123] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=8c:18:d9:c0:ef:ff [ 4.112312] VFS: Mounted root (cramfs filesystem) readonly on device 31:3. [ 4.128794] Freeing unused kernel memory: 236k freed [ 4.139266] Free = 23588k Setting hostname ... Mounting all filesystems ... Starting mdev ... Mounting /usr/data as rw filesystem...

am335x 移植rtl8189ES遇到的问题,请教大神帮忙看看

/tmp # insmod 8189es.ko RTL871X: module init start RTL871X: rtl8189es v4.3.10.1_13373.20150129 RTL871X: build time: Jun 14 2017 06:46:48 RTL871X: CHIP TYPE: RTL8188E RTL871X: register rtw_netdev_ops to netdev_ops RTL871X: Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0) RTL871X: RF_Type is 3!! RTL871X: EEPROM type is E-FUSE RTL871X: =>_CardEnable RTL871X: SetHwReg8188E: bMacPwrCtrlOn=1 RTL871X: <=_CardEnable RTL871X: _ReadPROMContent: 9346CR=0x20, Boot from EFUSE, Autoload OK RTL871X: =>_InitPowerOn_8188ES RTL871X: =>_CardEnable RTL871X: =>_CardEnable bMacPwrCtrlOn == _TRUE do nothing !! RTL871X: <=_CardEnable RTL871X: <=_InitPowerOn_8188ES bFWReady == _FALSE call reset 8051... RTL871X: =====> _8051Reset88E(): 8051 reset success . RTL871X: efuse_read_phymap_from_txpktbuf bcnhead:0 RTL871X: efuse_read_phymap_from_txpktbuf reg_0x106:0x00, write 0x69 RTL871X: efuse_read_phymap_from_txpktbuf reg_0x106:0x69 RTL871X: efuse_read_phymap_from_txpktbuf dbg_addr:0x0 RTL871X: efuse_read_phymap_from_txpktbuf write reg_0x143:0x00 之后卡住了, 代码: while(!(reg_0x143=rtw_read8(adapter, REG_TXPKTBUF_DBG))//dbg //while(rtw_read8(adapter, REG_TXPKTBUF_DBG) & BIT0 && (passing_time=rtw_get_passing_time_ms(start))<1000 ) { DBG_871X("%s polling reg_0x143:0x%02x, reg_0x106:0x%02x\n", __FUNCTION__, reg_0x143, rtw_read8(adapter, 0x106)); rtw_usleep_os(100); } lo32 = rtw_read32(adapter, REG_PKTBUF_DBG_DATA_L); hi32 = rtw_read32(adapter, REG_PKTBUF_DBG_DATA_H); 在lo32 = rtw_read32(adapter, REG_PKTBUF_DBG_DATA_L);卡住不能动了

Android下RTL8192cu WiFi模块的移植

本人用的友善之臂的tiny210开发板,想要在Android4.0系统下移植WiFi热点功能,所用的WiFi模块是USB接口的RTL8192CU模块。移植过程中,realtek技术文档说如果要使用nl80211接口的话,需要在驱动autoconf.h头文件中定义宏CONFIG_IOCTL_CFG80211,但是定义该宏变量后,系统每次加载该驱动时就会报错并自动重启。 报错结果如下: ![图片说明](https://img-ask.csdn.net/upload/201508/06/1438829631_983534.png) 然而,如果不定义该宏变量,驱动虽然正确加载,但是上层不能正常启动wpa_supplicant进程,logcat中也有报错: E/wpa_supplicant(2966): wlan0: Unsupported driver 'nl80211' E/WifiHW(1863): Supplicant not running, cannot connect E/WifiStateMachine(1863): Failed to setup control channel, restart supplicant E/WifiHW(1863): Unable to open connection to supplicant on "wlan0": No such file or directory 请问,有没有大神知道是怎么回事,或者有没有谁做过这个,能不能指导一下

wifi AP不正常 RTL8188

小弟遇到个问题 我在A20上调试RTL8188EU AP+STAION模式,station模式工作正常 但AP模式工作不正常。 AP在有设备连接时提示一下信息 [ 2844.943124] ODM_ARFBRefresh_8188E(): RateID=0 RateMask=000fffff RAUseRate=000ff015 HighestRate=19,DecisionRate=19 [ 2845.674255] ODM_ARFBRefresh_8188E(): RateID=0 RateMask=000f0000 RAUseRate=000f0000 HighestRate=19,DecisionRate=19 [ 2847.674496] ODM_ARFBRefresh_8188E(): RateID=0 RateMask=000ff000 RAUseRate=000ff000 HighestRate=19,DecisionRate=19 [ 2854.962622] RTL871X: ap recv disassoc reason code(8) sta:90:67:1c:ec:79:95 [ 2854.970418] RTL871X: ap recv disassoc reason code(8) sta:90:67:1c:ec:79:95 [ 2854.978233] RTL871X: set pairwise key to hw: alg:0(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:-512465752 没次在连接输入密码后过几秒提示:ap recv disassoc reason code(8) 然后连接失败 希望各位提点看法

瑞昱RTL8188ETV无线网卡驱动Linux系统的谁有,谢谢

在Linux里如何把8188ETV驱动加进去,下载的CD Linux不能加载RTL8188ETV无线网卡

linux下除了iwlist之外的其他扫描wifi热点的方法

使用iwlist的方式扫描热点,经常会出现interface doesn't support scaning device or resource busy。 还有别的方法能够扫描wifi热点吗?

ubuntu64位最新系统安转rtl8821ce无线驱动时,make报错,求助怎么解决?

![rtl8821ce文件放在桌面,makefile也修改了地址,make报错](https://img-ask.csdn.net/upload/201909/09/1568000322_956011.jpg) ![make报错,感觉是地址对了,不知道什么原因怎么解决](https://img-ask.csdn.net/upload/201909/09/1568000425_152442.jpg)

网卡调不通,网卡由LAN8720A改为了RTL8152B,厂商说不用驱动

在产商提供的开发板中,网卡LAN8720A和wifi用的一样的sdmmc1数据通道,经过我们改版后,方案提供商说现在的网卡RTL8152B是cdc设备,不需要驱动,但是网卡没有驱动起来。求助

如何在kali安装RTL8812AU网卡?

# 零、问题描述 WIn10能识别到网卡,VMware虚拟机也能识别到网卡,但是Kali就是连不上 从github上下的驱动以及kali自带的驱动都试过了了,但是就是还是报驱动错误。 # 一、目前配置情况 ## 1. WIN10检测到网卡,能正常使用。 ![WIN10能检测到网卡](https://img-ask.csdn.net/upload/201909/28/1569647348_597896.png) ## 2. 驱动已经装上了,虚拟机也能识别到网卡。 ![图片说明](https://img-ask.csdn.net/upload/201909/28/1569647472_802654.png) ## 3. KALI识别不到 ![图片说明](https://img-ask.csdn.net/upload/201909/28/1569647553_85535.png) # 二、目前结果 1. 启动驱动,插入网卡,检测不到,并报错 ![图片说明](https://img-ask.csdn.net/upload/201909/28/1569648005_68292.png) 2. 补一张虚拟机的配置图 ![图片说明](https://img-ask.csdn.net/upload/201909/28/1569647796_494661.png) 这次用kali自带的realtek-rtl88xxu-dkms包,用github上其他的驱动程序情况和这个一样,困扰好几天了,求大佬帮忙。(Ubuntu同)

Ubuntu 18.04.2 LTS Wifi连接不上(高通QCA9377无线网卡)

问题描述:安装了win10和Ubuntu 18.04.2 LTS双系统。win10中无线有线均可以上网,ubuntu中可以USB连接手机上网,但是无法连接wifi,设置中显示“未发现Wifi适配器”。 有线网卡型号:Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10) 无线网卡型号:Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) 在终端使用lspci命令二者均可显示 尝试解决: 终端中使用如下命令 sudo apt-get install build-essential linux-headers-$(uname -r) git echo "options ath10k_core skip_otp=y" | sudo tee /etc/modprobe.d/ath10k_core.conf wget https://www.kernel.org/pub/linux/kernel/projects/backports/2015/11/20/backports-20151120.tar.gz tar zxvf backports-20151120.tar.gz cd backports-20151120 make defconfig-wifi make sudo make install 在输入make命令之后报错: ``` /home/l/backports-20151120/backport-include/linux/kconfig.h:25:28: warning: "config_enabled" is not defined, evaluates to 0 [-Wundef] #define IS_BUILTIN(option) config_enabled(option) ^ ```

linux如何安装无线驱动?

笔记本型号:dell 5439 无线网卡型号:Intel® 无线-N 7260 BGN @ 2.4GHz 操作系统:elementary(基于ubuntu,而且在ubuntu下无线是可用的) 64位 我在网上下载到了无线网卡的驱动http://www.intel.com/support/cn/wireless/wlan/sb/cs-034398.htm, 按照提示,cp iwlwifi-xxx.ucode /lib/firmware 我以为这样就可以了,但是根本没用,求高手解答,谢谢!

支持kali linux的无线网卡?

寻找一款支持kali linux的无线网卡,求大神解救! 前两天在网上买了一款tp-link的,结果从官网上得知人家公司的全部产品都不支持linux,好坑啊!

Linux内核调用do_filp_open,返回0xfffffffe

大家好: 最近在调试Realtek的8188cu的USB无线网卡,加载驱动时需要一个Firmware,我看了代码,驱动会在指定的几个目录寻找。 <0>[path_openat][2931] ./lib/firmware/rtlwifi/rtl8192cufw.bin 而且我把rtl8192cufw.bin放在了根目录下面的/lib/firmware/rtlwifi/rtl8192cufw.bin 但是do_filp_open调用的path_openat总是返回0xFFFFFFFE回来,导致IS_ERR(file)一直为真。 想请问一下CSDN的大神Linux内核工作时的"./"是在哪个目录?除了文件不存在意外还有没有什么情况会导致path_openat返回0xFFFFFFFE?

ThinkPad E470 Ubuntu 如何安装无线网卡驱动

1. 无线网卡型号:RealTek 8821CE 2. Ubuntu:16.04 已经试过两种方法 1. [github中的开源驱动](https://github.com/lwfinger/rtlwifi_new),但是里面没有这个型号 2. NdisWrapper,安装win10的驱动,ndiswrapper显示安装成功,但是系统死活不承认这个驱动 求大神帮我支个招,装一下驱动。

android上实现wifi ap与sta共存

小弟菜鸟一枚,想在android4.2上实现wifi ap与sta共存,希望各路高手给以指引,谢谢!

linux系统无线网卡驱动如何安装

请教一下大神,如何用命令安装bcm43142无线网卡的驱动?有什么需要注意的吗?

在ise14.7中,使用verilog编好的程序生成RTL原理图时,看起来没问题,但是生成的Technology原理图却少了很多东西,好多信号线都直接接地了,有大神可以指点迷津吗?

我在编写一个控制信号的程序时,编译通过后,生成了RTL原理图和Technology原理图,但是看起来好像RTL原理图没什么问题, 但是Technology原理图少了很多东西,比如触发器,很多信号线也直接接地了。 我想问的是,如果程序要烧写到CPLD中,最关键的是要看Technology原理图是吧? 下面是我的一些代码,是我程序写的不对的原因吗?初学者,请见谅~ ``` module process01 ( input I_spi_cs0, input [3:0] channel0, input O_rx_done, output reg opwm0a, output reg opwm0b, output reg opwm01, output reg opwm02, output reg opwm03, output reg opwm04, output reg opwm05, output reg opwm06, output reg opwm07, output reg opwm08, output reg opwm09, output reg opwm010, output reg opwm011 ); always @(posedge O_rx_done ) begin case(channel0) 4'd0,4'd11,4'd12,4'd13,4'd14,4'd15: begin opwm0a <= 1'd0; opwm0b <= 1'd0; opwm01 <= 1'd0; opwm02 <= 1'd0; opwm03 <= 1'd0; opwm04 <= 1'd0; opwm05 <= 1'd0; opwm06 <= 1'd0; opwm07 <= 1'd0; opwm08 <= 1'd0; opwm09 <= 1'd0; opwm010 <= 1'd0; opwm011 <= 1'd0; end 4'd1: begin opwm0b <= 1'd1; opwm01 <= 1'd1; opwm02 <= 1'd1; end 4'd2: begin opwm0a <= 1'd1; opwm02 <= 1'd1; opwm03 <= 1'd1; end 4'd3: begin opwm0b <= 1'd1; opwm03 <= 1'd1; opwm04 <= 1'd1; end 4'd4: begin opwm0a <= 1'd1; opwm04 <= 1'd1; opwm05 <= 1'd1; end 4'd5: begin opwm0b <= 1'd1; opwm05 <= 1'd1; opwm06 <= 1'd1; end 4'd6: begin opwm0a <= 1'd1; opwm06 <= 1'd1; opwm07 <= 1'd1; end 4'd7: begin opwm0b <= 1'd1; opwm07 <= 1'd1; opwm08 <= 1'd1; end 4'd8: begin opwm0a <= 1'd1; opwm08 <= 1'd1; opwm09 <= 1'd1; end 4'd9: begin opwm0b <= 1'd1; opwm09 <= 1'd1; opwm010 <= 1'd1; end 4'd10: begin opwm0a <= 1'd1; opwm010 <= 1'd1; opwm011 <= 1'd1; end default: begin opwm0a <= 1'd0; opwm0b <= 1'd0; opwm01 <= 1'd0; opwm02 <= 1'd0; opwm03 <= 1'd0; opwm04 <= 1'd0; opwm05 <= 1'd0; opwm06 <= 1'd0; opwm07 <= 1'd0; opwm08 <= 1'd0; opwm09 <= 1'd0; opwm010 <= 1'd0; opwm011 <= 1'd0; end endcase end endmodule ``` ![图片说明](https://img-ask.csdn.net/upload/202003/02/1583116320_475850.jpg) 这是生成的技术原理图 ![图片说明](https://img-ask.csdn.net/upload/202003/02/1583116373_46671.jpg) 这是生成的RTL原理图

RTLIT css padding rtl正则表达式

<div class="post-text" itemprop="text"> <p>RTLIT ruby tool is used to switch from LTR to RTL in css files, but it doesn't also change the padding,margin left to righ for example :</p> <p><a href="https://github.com/zohararad/rtlit/blob/master/lib/rtlit/converter.rb" rel="nofollow">https://github.com/zohararad/rtlit/blob/master/lib/rtlit/converter.rb</a></p> <pre><code>padding: 1px 2px; padding: 0 2px 4px; padding: 1px 0 3px 4px; padding: 1px 2px 0 4px; padding: 1px 2px 3px 0; </code></pre> <p>need to change this values to be : </p> <pre><code>padding: 1px 2px; padding: 0 0 4px 2px; padding: 1px 4px 3px 0; padding: 1px 4px 0 2px; padding: 1px 0 3px 2px; </code></pre> <p>we need to switch always the second value with the 4th value and if they are only 3 switch the second value to the forth and set the second to 0</p> <p>also if there are only 2 values , leave it as it is.</p> <p>I need that regular expression in ruby or php </p> </div>

在核心php项目中动态LTR到RTL

<div class="post-text" itemprop="text"> <p>I have a website written in core php , I want to add Arabic language . So i have to make LTR to RTL dynamically . But how can I do it ? do i have to change all css code and rewrtie them all for RTL or is there anythins else ? I searched a lot and found rtlcss but how can i implement them easily ?</p> </div>

2019 Python开发者日-培训

2019 Python开发者日-培训

设计模式(JAVA语言实现)--20种设计模式附带源码

设计模式(JAVA语言实现)--20种设计模式附带源码

YOLOv3目标检测实战:训练自己的数据集

YOLOv3目标检测实战:训练自己的数据集

java后台+微信小程序 实现完整的点餐系统

java后台+微信小程序 实现完整的点餐系统

三个项目玩转深度学习(附1G源码)

三个项目玩转深度学习(附1G源码)

初级玩转Linux+Ubuntu(嵌入式开发基础课程)

初级玩转Linux+Ubuntu(嵌入式开发基础课程)

2019 AI开发者大会

2019 AI开发者大会

玩转Linux:常用命令实例指南

玩转Linux:常用命令实例指南

一学即懂的计算机视觉(第一季)

一学即懂的计算机视觉(第一季)

4小时玩转微信小程序——基础入门与微信支付实战

4小时玩转微信小程序——基础入门与微信支付实战

Git 实用技巧

Git 实用技巧

Python数据清洗实战入门

Python数据清洗实战入门

使用TensorFlow+keras快速构建图像分类模型

使用TensorFlow+keras快速构建图像分类模型

实用主义学Python(小白也容易上手的Python实用案例)

实用主义学Python(小白也容易上手的Python实用案例)

程序员的算法通关课:知己知彼(第一季)

程序员的算法通关课:知己知彼(第一季)

MySQL数据库从入门到实战应用

MySQL数据库从入门到实战应用

机器学习初学者必会的案例精讲

机器学习初学者必会的案例精讲

手把手实现Java图书管理系统(附源码)

手把手实现Java图书管理系统(附源码)

极简JAVA学习营第四期(报名以后加助教微信:eduxy-1)

极简JAVA学习营第四期(报名以后加助教微信:eduxy-1)

.net core快速开发框架

.net core快速开发框架

玩转Python-Python3基础入门

玩转Python-Python3基础入门

Python数据挖掘简易入门

Python数据挖掘简易入门

微信公众平台开发入门

微信公众平台开发入门

程序员的兼职技能课

程序员的兼职技能课

Windows版YOLOv4目标检测实战:训练自己的数据集

Windows版YOLOv4目标检测实战:训练自己的数据集

HoloLens2开发入门教程

HoloLens2开发入门教程

微信小程序开发实战

微信小程序开发实战

Java8零基础入门视频教程

Java8零基础入门视频教程

相关热词 c# cad插入影像 c#设计思想 c#正则表达式 转换 c#form复制 c#写web c# 柱形图 c# wcf 服务库 c#应用程序管理器 c#数组如何赋值给数组 c#序列化应用目的博客园
立即提问