想用个ssim比较两个图片相似度，报错“脚本中的所有函数都必须以 'end' 结束。”初学不懂，求大神指教
调用代码如下：
img1= imread('E:\paperanddata\127\1.jpg');
img2= imread('E:\paperanddata\127\2.jpg');
ssim(img1,img2);
源代码如下：
function [mssim, ssim_map] = ssim(img1, img2, K, window, L)
%========================================================================
%SSIM Index, Version 1.0
%Copyright(c) 2003 Zhou Wang
%All Rights Reserved.
%
%The author is with Howard Hughes Medical Institute, and Laboratory
%for Computational Vision at Center for Neural Science and Courant
%Institute of Mathematical Sciences, New York University.
%
%----------------------------------------------------------------------
%Permission to use, copy, or modify this software and its documentation
%for educational and research purposes only and without fee is hereby
%granted, provided that this copyright notice and the original authors'
%names ap pearon all copies and supporting documentation. This program
%shall not be used, rewritten, or adapted as the basis of a commercial
%software or hardware product without first obtaining permission of the
%authors. The authors make no representations about the suitability of
%this software for any purpose. It is provided "as is" without express
%or implied warranty.
%----------------------------------------------------------------------
%
%This is an implementation of the algorithm for calculating the
%Structural SIMilarity (SSIM) index between two images. Please refer
%to the following paper:
%
%Z. Wang, A. C. Bovik, H. R. Sheikh, and E. P. Simoncelli, "Image
%quality assessment: From error visibility to structural similarity"
%IEEE Transactios on Image Processing, vol. 13, no. 4, pp.600-612,
%Apr. 2004.
%
%Kindly report any suggestions or corrections to zhouwang@ieee.org
%
%----------------------------------------------------------------------
%
%Input : (1) img1: the first image being compared
% (2) img2: the second image being compared
% (3) K: constants in the SSIM index formula (see the above
% reference). defualt value: K = [0.01 0.03]
% (4) window: local window for statistics (see the above
% reference). default widnow is Gaussian given by
% window = fspecial('gaussian', 11, 1.5);
% (5) L: dynamic range of the images. default: L = 255
%
%Output: (1) mssim: the mean SSIM index value between 2 images.
% If one of the images being compared is regarded as
% perfect quality, then mssim can be considered as the
% quality measure of the other image.
% If img1 = img2, then mssim = 1.
% (2) ssim_map: the SSIM index map of the test image. The map
% has a smaller size than the input images. The actual size:
% size(img1) - size(window) + 1.
%
%Default Usage:
% Given 2 test images img1 and img2, whose dynamic range is 0-255
%
% [mssim ssim_map] = ssim_index(img1, img2);
%
%Advanced Usage:
% User defined parameters. For example
%
% K = [0.05 0.05];
% window = ones(8);
% L = 100;
% [mssim ssim_map] = ssim_index(img1, img2, K, window, L);
%
%See the results:
%
% mssim %Gives the mssim value
% imshow(max(0, ssim_map).^4) %Shows the SSIM index map
%
%========================================================================
if (nargin < 2 | nargin > 5)
ssim_index = -Inf;
ssim_map = -Inf;
return;
end
if (size(img1) ~= size(img2))
ssim_index = -Inf;
ssim_map = -Inf;
return;
end
[M N] = size(img1);
if (nargin == 2)
if ((M < 11) | (N < 11)) % 图像大小过小，则没有意义。
ssim_index = -Inf;
ssim_map = -Inf;
return
end
window = fspecial('gaussian', 11, 1.5); % 参数一个标准偏差1.5，11*11的高斯低通滤波。
K(1) = 0.01; % default settings
K(2) = 0.03;
L = 255;
end
if (nargin == 3)
if ((M < 11) | (N < 11))
ssim_index = -Inf;
ssim_map = -Inf;
return
end
window = fspecial('gaussian', 11, 1.5);
L = 255;
if (length(K) == 2)
if (K(1) < 0 | K(2) < 0)
ssim_index = -Inf;
ssim_map = -Inf;
return;
end
else
ssim_index = -Inf;
ssim_map = -Inf;
return;
end
end
if (nargin == 4)
[H W] = size(window);
if ((H*W) < 4 | (H > M) | (W > N))
ssim_index = -Inf;
ssim_map = -Inf;
return
end
L = 255;
if (length(K) == 2)
if (K(1) < 0 | K(2) < 0)
ssim_index = -Inf;
ssim_map = -Inf;
return;
end
else
ssim_index = -Inf;
ssim_map = -Inf;
return;
end
end
if (nargin == 5)
[H W] = size(window);
if ((H*W) < 4 | (H > M) | (W > N))
ssim_index = -Inf;
ssim_map = -Inf;
return
end
if (length(K) == 2)
if (K(1) < 0 | K(2) < 0)
ssim_index = -Inf;
ssim_map = -Inf;
return;
end
else
ssim_index = -Inf;
ssim_map = -Inf;
return;
end
end
if size(img1,3)~=1 %判断图像时不是彩色图，如果是，结果为3，否则为1
org=rgb2ycbcr(img1);
test=rgb2ycbcr(img2);
y1=org(:,:,1);
y2=test(:,:,1);
y1=double(y1);
y2=double(y2);
else
y1=double(img1);
y2=double(img2);
end
img1 = double(y1);
img2 = double(y2);
% automatic downsampling
%f = max(1,round(min(M,N)/256));
%downsampling by f
%use a simple low-pass filter
% if(f>1)
% lpf = ones(f,f);
% lpf = lpf/sum(lpf(:));
% img1 = imfilter(img1,lpf,'symmetric','same');
% img2 = imfilter(img2,lpf,'symmetric','same');
% img1 = img1(1:f:end,1:f:end);
% img2 = img2(1:f:end,1:f:end);
% end
C1 = (K(1)*L)^2; % 计算C1参数，给亮度L（x，y）用。 C1=6.502500
C2 = (K(2)*L)^2; % 计算C2参数，给对比度C（x，y）用。 C2=58.522500
window = window/sum(sum(window)); %滤波器归一化操作。
mu1 = filter2(window, img1, 'valid'); % 对图像进行滤波因子加权 valid改成same结果会低一丢丢
mu2 = filter2(window, img2, 'valid'); % 对图像进行滤波因子加权
mu1_sq = mu1.*mu1; % 计算出Ux平方值。
mu2_sq = mu2.*mu2; % 计算出Uy平方值。
mu1_mu2 = mu1.*mu2; % 计算Ux*Uy值。
sigma1_sq = filter2(window, img1.*img1, 'valid') - mu1_sq; % 计算sigmax （标准差）
sigma2_sq = filter2(window, img2.*img2, 'valid') - mu2_sq; % 计算sigmay （标准差）
sigma12 = filter2(window, img1.*img2, 'valid') - mu1_mu2; % 计算sigmaxy（标准差）
if (C1 > 0 & C2 > 0)
ssim_map = ((2*mu1_mu2 + C1).*(2*sigma12 + C2))./((mu1_sq + mu2_sq + C1).*(sigma1_sq + sigma2_sq + C2));
else
numerator1 = 2*mu1_mu2 + C1;
numerator2 = 2*sigma12 + C2;
denominator1 = mu1_sq + mu2_sq + C1;
denominator2 = sigma1_sq + sigma2_sq + C2;
ssim_map = ones(size(mu1));
index = (denominator1.*denominator2 > 0);
ssim_map(index) = (numerator1(index).*numerator2(index))./(denominator1(index).*denominator2(index));
index = (denominator1 ~= 0) & (denominator2 == 0);
ssim_map(index) = numerator1(index)./denominator1(index);
end
mssim = mean2(ssim_map);
return
报错错误: 文件:ssim.m 行:223 列:1
脚本中的所有函数都必须以 'end' 结束。
不知道怎么解决求指教
