elliott.david 2010-01-29 20:43 采纳率: 25%
浏览 285
已采纳

如何排除 Perl CGI 脚本的故障?

I have a Perl script that isn't working and I don't know how to start narrowing down the problem. What can I do?


Note: I'm adding the question because I really want to add my very lengthy answer to Stackoverflow. I keep externally linking to it in other answers and it deserves to be here. Don't be shy about editing my answer if you have something to add.

转载于:https://stackoverflow.com/questions/2165022/how-can-i-troubleshoot-my-perl-cgi-script

  • 写回答

8条回答 默认 最新

  • 游.程 2010-01-29 22:35
    关注

    This answer is intended as a general framework for working through problems with Perl CGI scripts and originally appeared on Perlmonks as Troubleshooting Perl CGI Scripts. It is not a complete guide to every problem that you may encounter, nor a tutorial on bug squashing. It is just the culmination of my experience debugging CGI scripts for twenty (plus!) years. This page seems to have had many different homes, and I seem to forget it exists, so I'm adding it to the StackOverflow. You can send any comments or suggestions to me at bdfoy@cpan.org. It's also community wiki, but don't go too nuts. :)


    Are you using Perl's built in features to help you find problems?

    Turn on warnings to let Perl warn you about questionable parts of your code. You can do this from the command line with the -w switch so you don't have to change any code or add a pragma to every file:

     % perl -w program.pl
    

    However, you should force yourself to always clear up questionable code by adding the warnings pragma to all of your files:

     use warnings;
    

    If you need more information than the short warning message, use the diagnostics pragma to get more information, or look in the perldiag documentation:

     use diagnostics;
    

    Did you output a valid CGI header first?

    The server is expecting the first output from a CGI script to be the CGI header. Typically that might be as simple as print "Content-type: text/plain\n\n"; or with CGI.pm and its derivatives, print header(). Some servers are sensitive to error output (on STDERR) showing up before standard output (on STDOUT).

    Try sending errors to the browser

    Add this line

     use CGI::Carp 'fatalsToBrowser';
    

    to your script. This also sends compilation errors to the browser window. Be sure to remove this before moving to a production environment, as the extra information can be a security risk.

    What did the error log say?

    Servers keep error logs (or they should, at least). Error output from the server and from your script should show up there. Find the error log and see what it says. There isn't a standard place for log files. Look in the server configuration for their location, or ask the server admin. You can also use tools such as CGI::Carp to keep your own log files.

    What are the script's permissions?

    If you see errors like "Permission denied" or "Method not implemented", it probably means that your script is not readable and executable by the web server user. On flavors of Unix, changing the mode to 755 is recommended: chmod 755 filename. Never set a mode to 777!

    Are you using use strict?

    Remember that Perl automatically creates variables when you first use them. This is a feature, but sometimes can cause bugs if you mistype a variable name. The pragma use strict will help you find those sorts of errors. It's annoying until you get used to it, but your programming will improve significantly after awhile and you will be free to make different mistakes.

    Does the script compile?

    You can check for compilation errors by using the -c switch. Concentrate on the first errors reported. Rinse, repeat. If you are getting really strange errors, check to ensure that your script has the right line endings. If you FTP in binary mode, checkout from CVS, or something else that does not handle line end translation, the web server may see your script as one big line. Transfer Perl scripts in ASCII mode.

    Is the script complaining about insecure dependencies?

    If your script complains about insecure dependencies, you are probably using the -T switch to turn on taint mode, which is a good thing since it keeps you have passing unchecked data to the shell. If it is complaining it is doing its job to help us write more secure scripts. Any data originating from outside of the program (i.e. the environment) is considered tainted. Environment variables such as PATH and LD_LIBRARY_PATH are particularly troublesome. You have to set these to a safe value or unset them completely, as I recommend. You should be using absolute paths anyway. If taint checking complains about something else, make sure that you have untainted the data. See perlsec man page for details.

    What happens when you run it from the command line?

    Does the script output what you expect when run from the command line? Is the header output first, followed by a blank line? Remember that STDERR may be merged with STDOUT if you are on a terminal (e.g. an interactive session), and due to buffering may show up in a jumbled order. Turn on Perl's autoflush feature by setting $| to a true value. Typically you might see $|++; in CGI programs. Once set, every print and write will immediately go to the output rather than being buffered. You have to set this for each filehandle. Use select to change the default filehandle, like so:

    $|++;                            #sets $| for STDOUT
    $old_handle = select( STDERR );  #change to STDERR
    $|++;                            #sets $| for STDERR
    select( $old_handle );           #change back to STDOUT
    

    Either way, the first thing output should be the CGI header followed by a blank line.

    What happens when you run it from the command line with a CGI-like environment?

    The web server environment is usually a lot more limited than your command line environment, and has extra information about the request. If your script runs fine from the command line, you might try simulating a web server environment. If the problem appears, you have an environment problem.

    Unset or remove these variables

    • PATH
    • LD_LIBRARY_PATH
    • all ORACLE_* variables

    Set these variables

    • REQUEST_METHOD (set to GET, HEAD, or POST as appropriate)
    • SERVER_PORT (set to 80, usually)
    • REMOTE_USER (if you are doing protected access stuff)

    Recent versions of CGI.pm ( > 2.75 ) require the -debug flag to get the old (useful) behavior, so you might have to add it to your CGI.pm imports.

    use CGI qw(-debug)
    

    Are you using die() or warn?

    Those functions print to STDERR unless you have redefined them. They don't output a CGI header, either. You can get the same functionality with packages such as CGI::Carp

    What happens after you clear the browser cache?

    If you think your script is doing the right thing, and when you perform the request manually you get the right output, the browser might be the culprit. Clear the cache and set the cache size to zero while testing. Remember that some browsers are really stupid and won't actually reload new content even though you tell it to do so. This is especially prevalent in cases where the URL path is the same, but the content changes (e.g. dynamic images).

    Is the script where you think it is?

    The file system path to a script is not necessarily directly related to the URL path to the script. Make sure you have the right directory, even if you have to write a short test script to test this. Furthermore, are you sure that you are modifying the correct file? If you don't see any effect with your changes, you might be modifying a different file, or uploading a file to the wrong place. (This is, by the way, my most frequent cause of such trouble ;)

    Are you using CGI.pm, or a derivative of it?

    If your problem is related to parsing the CGI input and you aren't using a widely tested module like CGI.pm, CGI::Request, CGI::Simple or CGI::Lite, use the module and get on with life. CGI.pm has a cgi-lib.pl compatibility mode which can help you solve input problems due to older CGI parser implementations.

    Did you use absolute paths?

    If you are running external commands with system, back ticks, or other IPC facilities, you should use an absolute path to the external program. Not only do you know exactly what you are running, but you avoid some security problems as well. If you are opening files for either reading or writing, use an absolute path. The CGI script may have a different idea about the current directory than you do. Alternatively, you can do an explicit chdir() to put you in the right place.

    Did you check your return values?

    Most Perl functions will tell you if they worked or not and will set $! on failure. Did you check the return value and examine $! for error messages? Did you check $@ if you were using eval?

    Which version of Perl are you using?

    The latest stable version of Perl is 5.28 (or not, depending on when this was last edited). Are you using an older version? Different versions of Perl may have different ideas of warnings.

    Which web server are you using?

    Different servers may act differently in the same situation. The same server product may act differently with different configurations. Include as much of this information as you can in any request for help.

    Did you check the server documentation?

    Serious CGI programmers should know as much about the server as possible - including not only the server features and behavior, but also the local configuration. The documentation for your server might not be available to you if you are using a commercial product. Otherwise, the documentation should be on your server. If it isn't, look for it on the web.

    Did you search the archives of comp.infosystems.www.authoring.cgi?

    This use to be useful but all the good posters have either died or wandered off.

    It's likely that someone has had your problem before, and that someone (possibly me) has answered it in this newsgroup. Although this newsgroup has passed its heyday, the collected wisdom from the past can sometimes be useful.

    Can you reproduce the problem with a short test script?

    In large systems, it may be difficult to track down a bug since so many things are happening. Try to reproduce the problem behavior with the shortest possible script. Knowing the problem is most of the fix. This may be certainly time-consuming, but you haven't found the problem yet and you're running out of options. :)

    Did you decide to go see a movie?

    Seriously. Sometimes we can get so wrapped up in the problem that we develop "perceptual narrowing" (tunnel vision). Taking a break, getting a cup of coffee, or blasting some bad guys in [Duke Nukem,Quake,Doom,Halo,COD] might give you the fresh perspective that you need to re-approach the problem.

    Have you vocalized the problem?

    Seriously again. Sometimes explaining the problem aloud leads us to our own answers. Talk to the penguin (plush toy) because your co-workers aren't listening. If you are interested in this as a serious debugging tool (and I do recommend it if you haven't found the problem by now), you might also like to read The Psychology of Computer Programming.

    本回答被题主选为最佳回答 , 对您是否有帮助呢?
    评论
查看更多回答(7条)

报告相同问题?

悬赏问题

  • ¥100 关于使用MATLAB中copularnd函数的问题
  • ¥20 在虚拟机的pycharm上
  • ¥15 jupyterthemes 设置完毕后没有效果
  • ¥15 matlab图像高斯低通滤波
  • ¥15 针对曲面部件的制孔路径规划,大家有什么思路吗
  • ¥15 钢筋实图交点识别,机器视觉代码
  • ¥15 如何在Linux系统中,但是在window系统上idea里面可以正常运行?(相关搜索:jar包)
  • ¥50 400g qsfp 光模块iphy方案
  • ¥15 两块ADC0804用proteus仿真时,出现异常
  • ¥15 关于风控系统,如何去选择