ℙℕℤℝ 2016-01-25 03:18
浏览 255
已采纳

报价和列表的区别是什么?

I know that you can use ' (aka quote) to create a list, and I use this all the time, like this:

> (car '(1 2 3))
1

But it doesn’t always work like I’d expect. For example, I tried to create a list of functions, like this, but it didn’t work:

> (define math-fns '(+ - * /))
> (map (lambda (fn) (fn 1)) math-fns)
application: not a procedure;
  expected a procedure that can be applied to arguments
  given: '+

When I use list, it works:

> (define math-fns (list + - * /))
> (map (lambda (fn) (fn 1)) math-fns)
'(1 -1 1 1)

Why? I thought ' was just a convenient shorthand, so why is the behavior different?

转载于:https://stackoverflow.com/questions/34984552/what-is-the-difference-between-quote-and-list

  • 写回答

1条回答 默认 最新

  • 狐狸.fox 2016-01-25 03:18
    关注

    TL;DR: They are different; use list when in doubt.

    A rule of thumb: use list whenever you want the arguments to be evaluated; quote “distributes” over its arguments, so '(+ 1 2) is like (list '+ '1 '2). You’ll end up with a symbol in your list, not a function.


    An in-depth look at list and quote

    In Scheme and Racket, quote and list are entirely different things, but since both of them can be used to produce lists, confusion is common and understandable. There is an incredibly important difference between them: list is a plain old function, while quote (even without the special ' syntax) is a special form. That is, list can be implemented in plain Scheme, but quote cannot be.

    The list function

    The list function is actually by far the simpler of the two, so let’s start there. It is a function that takes any number of arguments, and it collects the arguments into a list.

    > (list 1 2 3)
    (1 2 3)
    

    This above example can be confusing because the result is printed as a quoteable s-expression, and it’s true, in this case, the two syntaxes are equivalent. But if we get slightly more complicated, you’ll see that it is different:

    > (list 1 (+ 1 1) (+ 1 1 1))
    (1 2 3)
    > '(1 (+ 1 1) (+ 1 1 1))
    (1 (+ 1 1) (+ 1 1 1))
    

    What’s going on in the quote example? Well, we’ll discuss that in a moment, but first, take a look at list. It’s just an ordinary function, so it follows standard Scheme evaluation semantics: it evaluates each of its arguments before they get passed to the function. This means that expressions like (+ 1 1) will be reduced to 2 before they get collected into the list.

    This behavior is also visible when supplying variables to the list function:

    > (define x 42)
    > (list x)
    (42)
    > '(x)
    (x)
    

    With list, the x gets evaluated before getting passed to list. With quote, things are more complicated.

    Finally, because list is just a function, it can be used just like any other function, including in higher-order ways. For example, it can be passed to the map function, and it will work appropriately:

    > (map list '(1 2 3) '(4 5 6))
    ((1 4) (2 5) (3 6))
    

    The quote form

    Quotation, unlike list, is a special part of Lisps. The quote form is special in part because it gets a special reader abbreviation, ', but it’s also special even without that. Unlike list, quote is not a function, and therefore it does not need to behave like one—it has rules of its own.

    A brief discussion of Lisp source code

    In Lisp, of which Scheme and Racket are derivatives, all code is actually made up of ordinary data structures. For example, consider the following expression:

    (+ 1 2)
    

    That expression is actually a list, and it has three elements:

    • the + symbol
    • the number 1
    • the number 2

    All of these values are normal values that can be created by the programmer. It’s really easy to create the 1 value because it evaluates to itself: you just type 1. But symbols and lists are harder: by default, a symbol in the source code does a variable lookup! That is, symbols are not self-evaluating:

    > 1
    1
    > a
    a: undefined
      cannot reference undefined identifier
    

    As it turns out, though, symbols are basically just strings, and in fact we can convert between them:

    > (string->symbol "a")
    a
    

    Lists do even more than symbols, because by default, a list in the source code calls a function! Doing (+ 1 2) looks at the first element in the list, the + symbol, looks up the function associated with it, and invokes it with the rest of the elements in the list.

    Sometimes, though, you might want to disable this “special” behavior. You might want to just get the list or get the symbol without it being evaluated. To do this, you can use quote.

    The meaning of quotation

    With all this in mind, it’s pretty obvious what quote does: it just “turns off” the special evaluation behavior for the expression that it wraps. For example, consider quoteing a symbol:

    > (quote a)
    a
    

    Similarly, consider quoteing a list:

    > (quote (a b c))
    (a b c)
    

    No matter what you give quote, it will always, always spit it back out at you. No more, no less. That means if you give it a list, none of the subexpressions will be evaluated—do not expect them to be! If you need evaluation of any kind, use list.

    Now, one might ask: what happens if you quote something other than a symbol or a list? Well, the answer is... nothing! You just get it back.

    > (quote 1)
    1
    > (quote "abcd")
    "abcd"
    

    This makes sense, since quote still just spits out exactly what you give it. This is why “literals” like numbers and strings are sometimes called “self-quoting” in Lisp parlance.

    One more thing: what happens if you quote an expression containing quote? That is, what if you “double quote”?

    > (quote (quote 3))
    '3
    

    What happened there? Well, remember that ' is actually just a direct abbreviation for quote, so nothing special happened at all! In fact, if your Scheme has a way to disable the abbreviations when printing, it will look like this:

    > (quote (quote 3))
    (quote 3)
    

    Don’t be fooled by quote being special: just like (quote (+ 1)), the result here is just a plain old list. In fact, we can get the first element out of the list: can you guess what it will be?

    > (car (quote (quote 3)))
    quote
    

    If you guessed 3, you are wrong. Remember, quote disables all evaluation, and an expression containing a quote symbol is still just a plain list. Play with this in the REPL until you are comfortable with it.

    > (quote (quote (quote 3)))
    ''3
    (quote (1 2 (quote 3)))
    (1 2 '3)
    

    Quotation is incredibly simple, but it can come off as very complex because of how it tends to defy our understanding of the traditional evaluation model. In fact, it is confusing because of how simple it is: there are no special cases, there are no rules. It just returns exactly what you give it, precisely as stated (hence the name “quotation”).


    Appendix A: Quasiquotation

    So if quotation completely disables evaluation, what is it good for? Well, aside from making lists of strings, symbols, or numbers that are all known ahead of time, not much. Fortunately, the concept of quasiquotation provides a way to break out of the quotation and go back into ordinary evaluation.

    The basics are super simple: instead of using quote, use quasiquote. Normally, this works exactly like quote in every way:

    > (quasiquote 3)
    3
    > (quasiquote x)
    x
    > (quasiquote ((a b) (c d)))
    ((a b) (c d))
    

    What makes quasiquote special is that is recognizes a special symbol, unquote. Wherever unquote appears in the list, then it is replaced by the arbitrary expression it contains:

    > (quasiquote (1 2 (+ 1 2)))
    (1 2 (+ 1 2))
    > (quasiquote (1 2 (unquote (+ 1 2))))
    (1 2 3)
    

    This lets you use quasiquote to construct templates of sorts that have “holes” to be filled in with unquote. This means it’s possible to actually include the values of variables inside of quoted lists:

    > (define x 42)
    > (quasiquote (x is: (unquote x)))
    (x is: 42)
    

    Of course, using quasiquote and unquote is rather verbose, so they have abbreviations of their own, just like '. Specifically, quasiquote is ` (backtick) and unquote is , (comma). With those abbreviations, the above example is much more palatable.

    > `(x is: ,x)
    (x is: 42)
    

    One final point: quasiquote actually can be implemented in Racket using a rather hairy macro, and it is. It expands to usages of list, cons, and of course, quote.


    Appendix B: Implementing list and quote in Scheme

    Implementing list is super simple because of how “rest argument” syntax works. This is all you need:

    (define (list . args)
      args)
    

    That’s it!

    In contrast, quote is a lot harder—in fact, it’s impossible! It would seem totally feasible, since the idea of disabling evaluation sounds a lot like macros. Yet a naïve attempt reveals the trouble:

    (define fake-quote
      (syntax-rules ()
        ((_ arg) arg)))
    

    We just take arg and spit it back out... but this doesn’t work. Why not? Well, the result of our macro will be evaluated, so all is for naught. We might be able to expand to something sort of like quote by expanding to (list ...) and recursively quoting the elements, like this:

    (define impostor-quote
      (syntax-rules ()
        ((_ (a . b)) (cons (impostor-quote a) (impostor-quote b)))
        ((_ (e ...)) (list (impostor-quote e) ...))
        ((_ x)       x)))
    

    Unfortunately, though, without procedural macros, we can’t handle symbols without quote. We could get closer using syntax-case, but even then, we would only be emulating quote’s behavior, not replicating it.


    Appendix C: Racket printing conventions

    When trying the examples in this answer in Racket, you may find that they do not print as one would expect. Often, they may print with a leading ', such as in this example:

    > (list 1 2 3)
    '(1 2 3)
    

    This is because Racket, by default, prints results as expressions when possible. That is, you should be able to type the result into the REPL and get the same value back. I personally find this behavior nice, but it can be confusing when trying to understand quotation, so if you want to turn it off, call (print-as-expression #f), or change the printing style to “write” in the DrRacket language menu.

    本回答被题主选为最佳回答 , 对您是否有帮助呢?
    评论

报告相同问题?

悬赏问题

  • ¥15 C++使用Gunplot
  • ¥15 这个电路是如何实现路灯控制器的,原理是什么,怎么求解灯亮起后熄灭的时间如图?
  • ¥15 matlab数字图像处理频率域滤波
  • ¥15 在abaqus做了二维正交切削模型,给刀具添加了超声振动条件后输出切削力为什么比普通切削增大这么多
  • ¥15 ELGamal和paillier计算效率谁快?
  • ¥15 file converter 转换格式失败 报错 Error marking filters as finished,如何解决?
  • ¥15 Arcgis相交分析无法绘制一个或多个图形
  • ¥15 关于#r语言#的问题:差异分析前数据准备,报错Error in data[, sampleName1] : subscript out of bounds请问怎么解决呀以下是全部代码:
  • ¥15 seatunnel-web使用SQL组件时候后台报错,无法找到表格
  • ¥15 fpga自动售货机数码管(相关搜索:数字时钟)