When running my script, I am getting several errors like this:
Warning: Cannot modify header information - headers already sent by (output started at /some/file.php:12) in /some/file.php on line 23
The lines mentioned in the error messages contain header() and setcookie() calls.
What could be the reason for this? And how to fix it?
转载于:https://stackoverflow.com/questions/8028957/how-to-fix-headers-already-sent-error-in-php
分享
Functions that send/modify HTTP headers must be invoked before any output is made. <kbd>summary ⇊</kbd> Otherwise the call fails:
Warning: Cannot modify header information - headers already sent (output started at script:line)
Some functions modifying the HTTP header are:
Output can be:
Unintentional:
<?php or after ?>
Intentional:
print, echo and other functions producing output<html> sections prior <?php code. To understand why headers must be sent before output it's necessary to look at a typical HTTP response. PHP scripts mainly generate HTML content, but also pass a set of HTTP/CGI headers to the webserver:
HTTP/1.1 200 OK
Powered-By: PHP/5.3.7
Vary: Accept-Encoding
Content-Type: text/html; charset=utf-8
<html><head><title>PHP page output page</title></head>
<body><h1>Content</h1> <p>Some more output follows...</p>
and <a href="/"> <img src=internal-icon-delayed> </a>
The page/output always follows the headers. PHP has to pass the headers to the webserver first. It can only do that once. After the double linebreak it can nevermore amend them.
When PHP receives the first output (print, echo, <html>) it will
flush all collected headers. Afterwards it can send all the output
it wants. But sending further HTTP headers is impossible then.
The header() warning contains all relevant information to
locate the problem cause:
Warning: Cannot modify header information - headers already sent by (output started at /www/usr2345/htdocs/auth.php:52) in /www/usr2345/htdocs/index.php on line 100
Here "line 100" refers to the script where the header() invocation failed.
The "output started at" note within the parenthesis is more significant.
It denominates the source of previous output. In this example it's auth.php
and line 52. That's where you had to look for premature output.
Typical causes:
Intentional output from print and echo statements will terminate
the opportunity to send HTTP headers. The application flow must
be restructured to avoid that. Use functions
and templating schemes. Ensure header() calls occur before messages
are written out.
Functions that produce output include
print, echo, printf, vprintf
trigger_error, ob_flush, ob_end_flush, var_dump, print_r
readfile, passthru, flush, imagepng, imagejpeg
among others and user-defined functions.
Unparsed HTML sections in a .php file are direct output as well.
Script conditions that will trigger a header() call must be noted
before any raw <html> blocks.
<!DOCTYPE html>
<?php
// Too late for headers already.
Use a templating scheme to separate processing from output logic.
<?php for "script.php line 1" warningsIf the warning refers to output in line 1, then it's mostly
leading whitespace, text or HTML before the opening <?php token.
<?php
# There's a SINGLE space/newline before <? - Which already seals it.
Similarly it can occur for appended scripts or script sections:
?>
<?php
PHP actually eats up a single linebreak after close tags. But it won't compensate multiple newlines or tabs or spaces shifted into such gaps.
Linebreaks and spaces alone can be a problem. But there are also "invisible"
character sequences which can cause this. Most famously the
UTF-8 BOM (Byte-Order-Mark)
which isn't displayed by most text editors. It's the byte sequence EF BB BF, which
is optional and redundant for UTF-8 encoded documents. PHP however has to treat
it as raw output. It may show up as the characters  in the output (if the client
interprets the document as Latin-1) or similar "garbage".
In particular graphical editors and Java based IDEs are oblivious to its presence. They don't visualize it (obliged by the Unicode standard). Most programmer and console editors however do:
There it's easy to recognize the problem early on. Other editors may identify
its presence in a file/settings menu (Notepad++ on Windows can identify and
remedy the problem),
Another option to inspect the BOMs presence is resorting to an hexeditor.
On *nix systems hexdump is usually available,
if not a graphical variant which simplifies auditing these and other issues:
An easy fix is to set the text editor to save files as "UTF-8 (no BOM)" or similar such nomenclature. Often newcomers otherwise resort to creating new files and just copy&pasting the previous code back in.
There are also automated tools to examine and rewrite text files
(sed/awk or recode).
For PHP specifically there's the phptags tag tidier.
It rewrites close and open tags into long and short forms, but also easily
fixes leading and trailing whitespace, Unicode and UTF-x BOM issues:
phptags --whitespace *.php
It's sane to use on a whole include or project directory.
?>
If the error source is mentioned as behind the
closing ?>
then this is where some whitespace or raw text got written out.
The PHP end marker does not terminate script executation at this
point. Any text/space characters after it will be written out as page content
still.
It's commonly advised, in particular to newcomers, that trailing ?> PHP
close tags should be omitted. This eschews a small portion of these cases.
(Quite commonly include()d scripts are the culprit.)
It's typically a PHP extension or php.ini setting if no error source is concretized.
gzip stream encoding setting
or the ob_gzhandler.extension= module
generating an implicit PHP startup/warning message.If another PHP statement or expression causes a warning message or notice being printeded out, that also counts as premature output.
In this case you need to eschew the error,
delay the statement execution, or suppress the message with e.g.
isset() or @() -
when either doesn't obstruct debugging later on.
If you have error_reporting or display_errors disabled per php.ini,
then no warning will show up. But ignoring errors won't make the problem go
away. Headers still can't be sent after premature output.
So when header("Location: ...") redirects silently fail it's very
advisable to probe for warnings. Reenable them with two simple commands
atop the invocation script:
error_reporting(E_ALL);
ini_set("display_errors", 1);
Or set_error_handler("var_dump"); if all else fails.
Speaking of redirect headers, you should often use an idiom like this for final code paths:
exit(header("Location: /finished.html"));
Preferrably even a utility function, which prints a user message
in case of header() failures.
PHPs output buffering is a workaround to alleviate this issue. It often works reliably, but shouldn't substitute for proper application structuring and separating output from control logic. Its actual purpose is minimizing chunked transfers to the webserver.
The output_buffering=
setting nevertheless can help.
Configure it in the php.ini
or via .htaccess
or even .user.ini on
modern FPM/FastCGI setups.
Enabling it will allow PHP to buffer output instead of passing it to the webserver
instantly. PHP thus can aggregate HTTP headers.
It can likewise be engaged with a call to ob_start();
atop the invocation script. Which however is less reliable for multiple reasons:
Even if <?php ob_start(); ?> starts the first script, whitespace or a
BOM might get shuffled before, rendering it ineffective.
It can conceal whitespace for HTML output. But as soon as the application
logic attempts to send binary content (a generated image for example),
the buffered extraneous output becomes a problem. (Necessitating ob_clean()
as furher workaround.)
The buffer is limited in size, and can easily overrun when left to defaults. And that's not a rare occurence either, difficult to track down when it happens.
Both approaches therefore may become unreliable - in particular when switching between development setups and/or production servers. Which is why output buffering is widely considered just a crutch / strictly a workaround.
See also the basic usage example in the manual, and for more pros and cons:
If you didn't get the headers warning before, then the output buffering php.ini setting has changed. It's likely unconfigured on the current/new server.
headers_sent()
You can always use headers_sent() to probe if
it's still possible to... send headers. Which is useful to conditionally print
an info or apply other fallback logic.
if (headers_sent()) {
die("Redirect failed. Please click on this link: <a href=...>");
}
else{
exit(header("Location: /user.php"));
}
Useful fallback workarounds are:
<meta> tagIf your application is structurally hard to fix, then an easy (but
somewhat unprofessional) way to allow redirects is injecting a HTML
<meta> tag. A redirect can be achieved with:
<meta http-equiv="Location" content="http://example.com/">
Or with a short delay:
<meta http-equiv="Refresh" content="2; url=../target.html">
This leads to non-valid HTML when utilized past the <head> section.
Most browsers still accept it.
As alternative a JavaScript redirect can be used for page redirects:
<script> location.replace("target.html"); </script>
While this is often more HTML compliant than the <meta> workaround,
it incurs a reliance on JavaScript-capable clients.
Both approaches however make acceptable fallbacks when genuine HTTP header() calls fail. Ideally you'd always combine this with a user-friendly message and clickable link as last resort. (Which for instance is what the http_redirect() PECL extension does.)
setcookie() and session_start() are also affectedBoth setcookie() and session_start() need to send a Set-Cookie: HTTP header.
The same conditions therefore apply, and similar error messages will be generated
for premature output situations.
(Of course they're furthermore affected by disabled cookies in the browser, or even proxy issues. The session functionality obviously also depends on free disk space and other php.ini settings, etc.)
分享
php制作网页在html中body块中添加代码导致页面乱码，显示Cannot modify header information - headers already sent
html
php
前端
有问必答
