Proxmox ve无法驱动ac9560

Question

 

pve6.4系统下

使用lspci -nn可以看到网卡被检测到

00:14.3 Network controller [0280]: Intel Corporation Wireless-AC 9560 [Jefferson Peak] [8086:a370] (rev 10)

调用的内核模块

root@LY:~# lspci -k -nn -d 8086:a370
00:14.3 Network controller [0280]: Intel Corporation Wireless-AC 9560 [Jefferson Peak] [8086:a370] (rev 10)
        Subsystem: Intel Corporation Wireless-AC 9560 [Jefferson Peak] [8086:02a4]
        Kernel driver in use: iwlwifi
        Kernel modules: iwlwifi

 网卡设备里却没有

root@LY:~# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UP mode DEFAULT group default qlen 1000
    link/ether 00:d8:61:dc:bb:c0 brd ff:ff:ff:ff:ff:ff
3: enp3s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast master vmbr1 state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:15:17:f3:08:cd brd ff:ff:ff:ff:ff:ff
4: enp3s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast master vmbr2 state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:15:17:f3:08:cc brd ff:ff:ff:ff:ff:ff
5: enp4s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast master vmbr3 state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:15:17:f3:08:cf brd ff:ff:ff:ff:ff:ff
6: enp4s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast master vmbr4 state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:15:17:f3:08:ce brd ff:ff:ff:ff:ff:ff
7: wlo1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 24:41:8c:27:34:f4 brd ff:ff:ff:ff:ff:ff
8: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether 00:d8:61:dc:bb:c0 brd ff:ff:ff:ff:ff:ff
9: vmbr1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether 00:15:17:f3:08:cd brd ff:ff:ff:ff:ff:ff
10: vmbr2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:15:17:f3:08:cc brd ff:ff:ff:ff:ff:ff
11: vmbr3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:15:17:f3:08:cf brd ff:ff:ff:ff:ff:ff
12: vmbr4: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:15:17:f3:08:ce brd ff:ff:ff:ff:ff:ff
13: tap100i0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master fwbr100i0 state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether 62:08:3d:5a:f4:64 brd ff:ff:ff:ff:ff:ff
14: fwbr100i0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether ae:f4:95:b8:3d:4d brd ff:ff:ff:ff:ff:ff
15: fwpr100p0@fwln100i0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vmbr0 state UP mode DEFAULT group default qlen 1000
    link/ether 4e:a7:f6:69:73:c1 brd ff:ff:ff:ff:ff:ff
16: fwln100i0@fwpr100p0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master fwbr100i0 state UP mode DEFAULT group default qlen 1000
    link/ether ae:f4:95:b8:3d:4d brd ff:ff:ff:ff:ff:ff
17: tap101i0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether 2e:7d:f1:11:9d:8f brd ff:ff:ff:ff:ff:ff
18: tap101i1: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr1 state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether 2a:ec:13:a9:e6:12 brd ff:ff:ff:ff:ff:ff

pve网络截图 ，没有显示无线网卡

如何才能在6.4上安装驱动，并使网卡能在pve上正常显示并使用，请给出详细步骤。必须是在pve上的shell操作！！！！

我会按照回答者步骤操作，成功即采纳。

Answer 1

代码如下，如有帮助，请采纳一下，谢谢~

个人感觉主要是intel（r）Wireless-AC xxxx 产品和win10更新后的对应驱动不适配（我只能有线联网）我后来的解决方法如下(顺序不记得了，当时百度方法试了个遍瞎折腾到最后突然wlan模块就有了)：（要有线联网前提）

 

1.打开点击“设备管理器”网络适配器上”Intel(R) Wireless-AC"属性--更新驱动程序”--“自动更新驱动程序”Intel(R) Wireless-AC，电脑重启好多次，不成功一直有感叹号（结果：发现就是安装失败，报10错误，windows系统还是哪里两边的日志都报啥资源冲突啥的我也忘记了，估计是没能彻底删除，而且“服务"：NetSetupService一直手动启动不了几秒就停止，没解决）

 

2.后来在win10“应用和功能”里搜“英特尔”找到并彻底卸载英特尔的proset/无线软件之类的模块,在intel官网通过下载英特尔® 驱动程序和支持助理自动更新重按驱动程序。

 

3.再接着回头看设备管理器上卸载重装Intel(R) Wireless-ACxxxx，黄色感叹号莫名消失，桌面下角wlan莫名就有了

 

方法二：还有一种我没试：(我觉得应该也可以)

 

就是在网络适配器上”更新驱动程序”不要用“自动更新驱动程序”，而是选下面“浏览我的计算机驱动程序”，下面的“让我从计算机上可用驱动选取”，选以前的无线网络驱动，重启可能就可以了吧。