Ricci流同胚于Chaos流吗 2023-03-27 12:53 采纳率: 60%
浏览 30

关于bcolz的安装和wikipediatrend流量数据的获取问题（二）

下载了：bcolz-1.2.1.tar.gz 和 numexpr-2.8.4.tar.gz
并分别解压在 bcolz 和 numexpr 文件下，
并已将两个文件夹都上传至了 kaggle。
输入“!pip install bcolz”，安装仍报错。


```python
Collecting bcolz
  Using cached bcolz-1.2.1.tar.gz (1.5 MB)
  Preparing metadata (setup.py) ... done
Requirement already satisfied: numpy>=1.7 in /opt/conda/lib/python3.7/site-packages (from bcolz) (1.21.6)
Building wheels for collected packages: bcolz
  Building wheel for bcolz (setup.py) ... error
  error: subprocess-exited-with-error
  
  × python setup.py bdist_wheel did not run successfully.
  │ exit code: 1
  ╰─> [103 lines of output]
      SSE2 detected
      AVX2 detected
      /opt/conda/lib/python3.7/site-packages/setuptools/installer.py:30: SetuptoolsDeprecationWarning: setuptools.installer is deprecated. Requirements should be satisfied by a PEP 517 installer.
        SetuptoolsDeprecationWarning,
      running bdist_wheel
      running build
      running build_py
      creating build
      creating build/lib.linux-x86_64-3.7
      creating build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/toplevel.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/__init__.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/chunked_eval.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/version.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/ctable.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/arrayprint.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/py2help_tests.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/attrs.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/defaults.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/utils.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/py2help.py -> build/lib.linux-x86_64-3.7/bcolz
      creating build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_queries.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_carray.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/__init__.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_ndcarray.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/common.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_carray_objects.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/all.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_attrs.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_ctable.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/carray_ext.pxd -> build/lib.linux-x86_64-3.7/bcolz
      running build_ext
      skipping 'bcolz/carray_ext.c' Cython extension (up-to-date)
      building 'bcolz.carray_ext' extension
      creating build/temp.linux-x86_64-3.7
      creating build/temp.linux-x86_64-3.7/bcolz
      creating build/temp.linux-x86_64-3.7/c-blosc
      creating build/temp.linux-x86_64-3.7/c-blosc/blosc
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/lz4-1.8.1.2
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/snappy-1.1.1
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zlib-1.2.8
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/dictBuilder
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/legacy
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/deprecated
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/common
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/decompress
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/compress
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c bcolz/carray_ext.c -o build/temp.linux-x86_64-3.7/bcolz/carray_ext.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      In file included from /opt/conda/lib/python3.7/site-packages/numpy/core/include/numpy/ndarraytypes.h:1969,
                       from /opt/conda/lib/python3.7/site-packages/numpy/core/include/numpy/ndarrayobject.h:12,
                       from /opt/conda/lib/python3.7/site-packages/numpy/core/include/numpy/arrayobject.h:4,
                       from bcolz/carray_ext.c:525:
      /opt/conda/lib/python3.7/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:17:2: warning: #warning "Using deprecated NumPy API, disable it with " "#define NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp]
         17 | #warning "Using deprecated NumPy API, disable it with " \
            |  ^~~~~~~
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c c-blosc/blosc/blosc.c -o build/temp.linux-x86_64-3.7/c-blosc/blosc/blosc.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      In file included from /usr/include/stdio.h:867,
                       from c-blosc/blosc/blosc.c:11:
      In function ‘fprintf’,
          inlined from ‘blosc_d’ at c-blosc/blosc/blosc.c:770:9:
      /usr/include/x86_64-linux-gnu/bits/stdio2.h:100:10: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
        100 |   return __fprintf_chk (__stream, __USE_FORTIFY_LEVEL - 1, __fmt,
            |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        101 |    __va_arg_pack ());
            |    ~~~~~~~~~~~~~~~~~
      c-blosc/blosc/blosc.c: In function ‘blosc_d’:
      c-blosc/blosc/blosc.c:772:31: note: format string is defined here
        772 |                 "support for '%s' format. ", compname);
            |                               ^~
      In file included from /usr/include/stdio.h:867,
                       from c-blosc/blosc/blosc.c:11:
      In function ‘fprintf’,
          inlined from ‘write_compression_header.isra.0’ at c-blosc/blosc/blosc.c:1168:5:
      /usr/include/x86_64-linux-gnu/bits/stdio2.h:100:10: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
        100 |   return __fprintf_chk (__stream, __USE_FORTIFY_LEVEL - 1, __fmt,
            |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        101 |    __va_arg_pack ());
            |    ~~~~~~~~~~~~~~~~~
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c c-blosc/blosc/fastcopy.c -o build/temp.linux-x86_64-3.7/c-blosc/blosc/fastcopy.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c c-blosc/blosc/bitshuffle-generic.c -o build/temp.linux-x86_64-3.7/c-blosc/blosc/bitshuffle-generic.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c c-blosc/blosc/shuffle-generic.c -o build/temp.linux-x86_64-3.7/c-blosc/blosc/shuffle-generic.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c c-blosc/blosc/shuffle.c -o build/temp.linux-x86_64-3.7/c-blosc/blosc/shuffle.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      c-blosc/blosc/shuffle.c:170:1: error: conflicting types for ‘_xgetbv’
        170 | _xgetbv(uint32_t xcr) {
            | ^~~~~~~
      In file included from /usr/lib/gcc/x86_64-linux-gnu/9/include/immintrin.h:43,
                       from c-blosc/blosc/blosc-common.h:77,
                       from c-blosc/blosc/shuffle.h:18,
                       from c-blosc/blosc/shuffle.c:10:
      /usr/lib/gcc/x86_64-linux-gnu/9/include/xsaveintrin.h:60:1: note: previous definition of ‘_xgetbv’ was here
         60 | _xgetbv (unsigned int __A)
            | ^~~~~~~
      In file included from c-blosc/blosc/shuffle.c:11:
      c-blosc/blosc/shuffle-generic.h:61:13: warning: ‘unshuffle_generic_inline’ defined but not used [-Wunused-function]
         61 | static void unshuffle_generic_inline(const size_t type_size,
            |             ^~~~~~~~~~~~~~~~~~~~~~~~
      c-blosc/blosc/shuffle-generic.h:32:13: warning: ‘shuffle_generic_inline’ defined but not used [-Wunused-function]
         32 | static void shuffle_generic_inline(const size_t type_size,
            |             ^~~~~~~~~~~~~~~~~~~~~~
      error: command 'gcc' failed with exit status 1
      [end of output]
  
  note: This error originates from a subprocess, and is likely not a problem with pip.
  ERROR: Failed building wheel for bcolz
  Running setup.py clean for bcolz
Failed to build bcolz
Installing collected packages: bcolz
  Running setup.py install for bcolz ... error
  error: subprocess-exited-with-error
  
  × Running setup.py install for bcolz did not run successfully.
  │ exit code: 1
  ╰─> [105 lines of output]
      SSE2 detected
      AVX2 detected
      /opt/conda/lib/python3.7/site-packages/setuptools/installer.py:30: SetuptoolsDeprecationWarning: setuptools.installer is deprecated. Requirements should be satisfied by a PEP 517 installer.
        SetuptoolsDeprecationWarning,
      running install
      /opt/conda/lib/python3.7/site-packages/setuptools/command/install.py:37: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
        setuptools.SetuptoolsDeprecationWarning,
      running build
      running build_py
      creating build
      creating build/lib.linux-x86_64-3.7
      creating build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/toplevel.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/__init__.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/chunked_eval.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/version.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/ctable.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/arrayprint.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/py2help_tests.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/attrs.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/defaults.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/utils.py -> build/lib.linux-x86_64-3.7/bcolz
      copying bcolz/py2help.py -> build/lib.linux-x86_64-3.7/bcolz
      creating build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_queries.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_carray.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/__init__.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_ndcarray.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/common.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_carray_objects.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/all.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_attrs.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/tests/test_ctable.py -> build/lib.linux-x86_64-3.7/bcolz/tests
      copying bcolz/carray_ext.pxd -> build/lib.linux-x86_64-3.7/bcolz
      running build_ext
      skipping 'bcolz/carray_ext.c' Cython extension (up-to-date)
      building 'bcolz.carray_ext' extension
      creating build/temp.linux-x86_64-3.7
      creating build/temp.linux-x86_64-3.7/bcolz
      creating build/temp.linux-x86_64-3.7/c-blosc
      creating build/temp.linux-x86_64-3.7/c-blosc/blosc
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/lz4-1.8.1.2
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/snappy-1.1.1
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zlib-1.2.8
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/dictBuilder
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/legacy
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/deprecated
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/common
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/decompress
      creating build/temp.linux-x86_64-3.7/c-blosc/internal-complibs/zstd-1.3.4/compress
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c bcolz/carray_ext.c -o build/temp.linux-x86_64-3.7/bcolz/carray_ext.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      In file included from /opt/conda/lib/python3.7/site-packages/numpy/core/include/numpy/ndarraytypes.h:1969,
                       from /opt/conda/lib/python3.7/site-packages/numpy/core/include/numpy/ndarrayobject.h:12,
                       from /opt/conda/lib/python3.7/site-packages/numpy/core/include/numpy/arrayobject.h:4,
                       from bcolz/carray_ext.c:525:
      /opt/conda/lib/python3.7/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:17:2: warning: #warning "Using deprecated NumPy API, disable it with " "#define NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp]
         17 | #warning "Using deprecated NumPy API, disable it with " \
            |  ^~~~~~~
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c c-blosc/blosc/blosc.c -o build/temp.linux-x86_64-3.7/c-blosc/blosc/blosc.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      In file included from /usr/include/stdio.h:867,
                       from c-blosc/blosc/blosc.c:11:
      In function ‘fprintf’,
          inlined from ‘blosc_d’ at c-blosc/blosc/blosc.c:770:9:
      /usr/include/x86_64-linux-gnu/bits/stdio2.h:100:10: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
        100 |   return __fprintf_chk (__stream, __USE_FORTIFY_LEVEL - 1, __fmt,
            |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        101 |    __va_arg_pack ());
            |    ~~~~~~~~~~~~~~~~~
      c-blosc/blosc/blosc.c: In function ‘blosc_d’:
      c-blosc/blosc/blosc.c:772:31: note: format string is defined here
        772 |                 "support for '%s' format. ", compname);
            |                               ^~
      In file included from /usr/include/stdio.h:867,
                       from c-blosc/blosc/blosc.c:11:
      In function ‘fprintf’,
          inlined from ‘write_compression_header.isra.0’ at c-blosc/blosc/blosc.c:1168:5:
      /usr/include/x86_64-linux-gnu/bits/stdio2.h:100:10: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
        100 |   return __fprintf_chk (__stream, __USE_FORTIFY_LEVEL - 1, __fmt,
            |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        101 |    __va_arg_pack ());
            |    ~~~~~~~~~~~~~~~~~
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c c-blosc/blosc/fastcopy.c -o build/temp.linux-x86_64-3.7/c-blosc/blosc/fastcopy.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c c-blosc/blosc/bitshuffle-generic.c -o build/temp.linux-x86_64-3.7/c-blosc/blosc/bitshuffle-generic.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c c-blosc/blosc/shuffle-generic.c -o build/temp.linux-x86_64-3.7/c-blosc/blosc/shuffle-generic.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -DHAVE_LZ4=1 -DHAVE_SNAPPY=1 -DHAVE_ZLIB=1 -DHAVE_ZSTD=1 -Ibcolz -Ic-blosc/blosc -Ic-blosc/internal-complibs/snappy-1.1.1 -Ic-blosc/internal-complibs/lz4-1.8.1.2 -Ic-blosc/internal-complibs/zstd-1.3.4 -Ic-blosc/internal-complibs/zlib-1.2.8 -Ic-blosc/internal-complibs/zstd-1.3.4/dictBuilder -Ic-blosc/internal-complibs/zstd-1.3.4/dll -Ic-blosc/internal-complibs/zstd-1.3.4/legacy -Ic-blosc/internal-complibs/zstd-1.3.4/deprecated -Ic-blosc/internal-complibs/zstd-1.3.4/common -Ic-blosc/internal-complibs/zstd-1.3.4/decompress -Ic-blosc/internal-complibs/zstd-1.3.4/compress -I/opt/conda/lib/python3.7/site-packages/numpy/core/include -I/opt/conda/include/python3.7m -c c-blosc/blosc/shuffle.c -o build/temp.linux-x86_64-3.7/c-blosc/blosc/shuffle.o -DSHUFFLE_SSE2_ENABLED -msse2 -DSHUFFLE_AVX2_ENABLED -mavx2
      c-blosc/blosc/shuffle.c:170:1: error: conflicting types for ‘_xgetbv’
        170 | _xgetbv(uint32_t xcr) {
            | ^~~~~~~
      In file included from /usr/lib/gcc/x86_64-linux-gnu/9/include/immintrin.h:43,
                       from c-blosc/blosc/blosc-common.h:77,
                       from c-blosc/blosc/shuffle.h:18,
                       from c-blosc/blosc/shuffle.c:10:
      /usr/lib/gcc/x86_64-linux-gnu/9/include/xsaveintrin.h:60:1: note: previous definition of ‘_xgetbv’ was here
         60 | _xgetbv (unsigned int __A)
            | ^~~~~~~
      In file included from c-blosc/blosc/shuffle.c:11:
      c-blosc/blosc/shuffle-generic.h:61:13: warning: ‘unshuffle_generic_inline’ defined but not used [-Wunused-function]
         61 | static void unshuffle_generic_inline(const size_t type_size,
            |             ^~~~~~~~~~~~~~~~~~~~~~~~
      c-blosc/blosc/shuffle-generic.h:32:13: warning: ‘shuffle_generic_inline’ defined but not used [-Wunused-function]
         32 | static void shuffle_generic_inline(const size_t type_size,
            |             ^~~~~~~~~~~~~~~~~~~~~~
      error: command 'gcc' failed with exit status 1
      [end of output]
  
  note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure

× Encountered error while trying to install package.
╰─> bcolz

note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.

```

  • 写回答

1条回答 默认 最新

  • Bony- 2023-03-27 13:47
    关注

    如果你已经下载了bcolz-1.2.1.tar.gz文件并解压到了本地文件夹bcolz中，你可以尝试在本地使用以下命令安装bcolz：

    
cd bcolz
python setup.py install

    如果你已经将bcolz文件夹上传至Kaggle上，可以在Kaggle的Notebook中使用以下命令安装bcolz：

    bash
    Copy code

    !pip install /kaggle/working/bcolz

    同样的，如果你已经下载了numexpr-2.8.4.tar.gz文件并解压到了本地文件夹numexpr中，你可以尝试在本地使用以下命令安装numexpr：

    cd numexpr
python setup.py install

    如果你已经将numexpr文件夹上传至Kaggle上，可以在Kaggle的Notebook中使用以下命令安装numexpr：

    !pip install /kaggle/working/numexpr

    需要注意的是，如果你使用了Kaggle Notebook的话，确保你的Kernel选择的是Python，并且你已经启用了Internet连接，因为安装时需要从网络下载一些依赖库

    评论

报告相同问题？

问题事件

  • 创建了问题 3月27日

悬赏问题

  • ¥15 preLaunchTask"C/C++: aarch64- apple-darwin22-g++-14 生成活动 文件”已终止，退出代码为-1。
  • ¥18 关于#贝叶斯概率#的问题：这篇文章中利用em算法求出了对数似然值作为概率表参数，然后进行概率表计算，这个概率表是怎样计算的呀
  • ¥20 C#上传XML格式数据
  • ¥15 elementui上传结合oss接口断点续传，现在只差停止上传和继续上传，各大精英看下
  • ¥100 单片机hardfaulr
  • ¥20 手机截图相片分辨率降低一半
  • ¥50 求一段sql语句，遇到小难题了，可以50米解决
  • ¥15 速求，对多种商品的购买力优化问题（用遗传算法、枚举法、粒子群算法、模拟退火算法等方法求解）
  • ¥100 速求！商品购买力最优化问题（用遗传算法求解，给出python代码）
  • ¥15 虚拟机检测，可以是封装好的DLL，可付费