doushi9729 2015-03-08 15:14
浏览 152

对于apache 2.4.9,我无法在本地浏览器中使用ip访问我的WAMP站点

I am working with Apache 2.4.9 and I set the port number to 8081. I was trying to access my site with my friend's laptop connected via LAN. For that from one Codeproject Article, I have set the rules for firewall and edited my httpd.conffile.

Still, I am unable to access sites over IP even in my computer. Then I looked over again and found that Apache 2.4.~ syntax doesn't require "Order allow, deny". So, I again edited it with Require all granted. But still I am unable to access it and browser is showing 'Timed Out'.

Can somebody please help me? Here is the current structure of my httpd.conf file:

  #
        # This is the main Apache HTTP server configuration file.  It contains the
        # configuration directives that give the server its instructions.
        # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
        # In particular, see 
        # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
        # for a discussion of each configuration directive.
        #
        # Do NOT simply read the instructions in here without understanding
        # what they do.  They're here only as hints or reminders.  If you are unsure
        # consult the online docs. You have been warned.  
        #
        # Configuration and logfile names: If the filenames you specify for many
        # of the server's control files begin with "/" (or "drive:/" for Win32), the
        # server will use that explicit path.  If the filenames do *not* begin
        # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
        # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
        # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
        # will be interpreted as '/logs/access_log'.
        #
        # NOTE: Where filenames are specified, you must use forward slashes
        # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
        # If a drive letter is omitted, the drive on which httpd.exe is located
        # will be used by default.  It is recommended that you always supply
        # an explicit drive letter in absolute paths to avoid confusion.
        ServerSignature On
        ServerTokens Full

        #
        # ServerRoot: The top of the directory tree under which the server's
        # configuration, error, and log files are kept.
        #
        # Do not add a slash at the end of the directory path.  If you point
        # ServerRoot at a non-local disk, be sure to specify a local disk on the
        # Mutex directive, if file-based mutexes are used.  If you wish to share the
        # same ServerRoot for multiple httpd daemons, you will need to change at
        # least PidFile.
        #
        ServerRoot "c:/wamp/bin/apache/apache2.4.9"

        Define APACHE24 Apache2.4

        #
        # Mutex: Allows you to set the mutex mechanism and mutex file directory
        # for individual mutexes, or change the global defaults
        #
        # Uncomment and change the directory if mutexes are file-based and the default
        # mutex file directory is not on a local disk or is not appropriate for some
        # other reason.
        #
        # Mutex default:logs

        #
        # Listen: Allows you to bind Apache to specific IP addresses and/or
        # ports, instead of the default. See also the <VirtualHost>
        # directive.
        #
        # Change this to Listen on specific IP addresses as shown below to 
        # prevent Apache from glomming onto all bound IP addresses.
        #
        #Listen 12.34.56.78:80
        Listen 8081

        #
        # Dynamic Shared Object (DSO) Support
        #
        # To be able to use the functionality of a module which was built as a DSO you
        # have to place corresponding `LoadModule' lines at this location so the
        # directives contained in it are actually available _before_ they are used.
        # Statically compiled modules (those listed by `httpd -l') do not need
        # to be loaded here.
        #
        # Example:
        # LoadModule foo_module modules/mod_foo.so
        #
        LoadModule access_compat_module modules/mod_access_compat.so
        LoadModule actions_module modules/mod_actions.so
        LoadModule alias_module modules/mod_alias.so
        LoadModule allowmethods_module modules/mod_allowmethods.so
        LoadModule asis_module modules/mod_asis.so
        LoadModule auth_basic_module modules/mod_auth_basic.so
        #LoadModule auth_digest_module modules/mod_auth_digest.so
        #LoadModule authn_anon_module modules/mod_authn_anon.so
        LoadModule authn_core_module modules/mod_authn_core.so
        #LoadModule authn_dbd_module modules/mod_authn_dbd.so
        #LoadModule authn_dbm_module modules/mod_authn_dbm.so
        LoadModule authn_file_module modules/mod_authn_file.so
        #LoadModule authn_socache_module modules/mod_authn_socache.so
        #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
        LoadModule authz_core_module modules/mod_authz_core.so
        #LoadModule authz_dbd_module modules/mod_authz_dbd.so
        #LoadModule authz_dbm_module modules/mod_authz_dbm.so
        LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
        LoadModule authz_host_module modules/mod_authz_host.so
        #LoadModule authz_owner_module modules/mod_authz_owner.so
        LoadModule authz_user_module modules/mod_authz_user.so
        LoadModule autoindex_module modules/mod_autoindex.so
        #LoadModule buffer_module modules/mod_buffer.so
        LoadModule cache_module modules/mod_cache.so
        LoadModule cache_disk_module modules/mod_cache_disk.so
        #LoadModule cern_meta_module modules/mod_cern_meta.so
        LoadModule cgi_module modules/mod_cgi.so
        #LoadModule charset_lite_module modules/mod_charset_lite.so
        #LoadModule data_module modules/mod_data.so
        #LoadModule dav_module modules/mod_dav.so
        #LoadModule dav_fs_module modules/mod_dav_fs.so
        #LoadModule dav_lock_module modules/mod_dav_lock.so
        #LoadModule dbd_module modules/mod_dbd.so
        LoadModule deflate_module modules/mod_deflate.so
        LoadModule dir_module modules/mod_dir.so
        #LoadModule dumpio_module modules/mod_dumpio.so
        LoadModule env_module modules/mod_env.so
        #LoadModule expires_module modules/mod_expires.so
        #LoadModule ext_filter_module modules/mod_ext_filter.so
        LoadModule file_cache_module modules/mod_file_cache.so
        #LoadModule filter_module modules/mod_filter.so
        #LoadModule headers_module modules/mod_headers.so
        #LoadModule heartbeat_module modules/mod_heartbeat.so
        #LoadModule heartmonitor_module modules/mod_heartmonitor.so
        #LoadModule ident_module modules/mod_ident.so
        #LoadModule imagemap_module modules/mod_imagemap.so
        LoadModule include_module modules/mod_include.so
        #LoadModule info_module modules/mod_info.so
        LoadModule isapi_module modules/mod_isapi.so
        #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
        #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
        #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
        #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
        #LoadModule ldap_module modules/mod_ldap.so
        #LoadModule logio_module modules/mod_logio.so
        LoadModule log_config_module modules/mod_log_config.so
        #LoadModule log_debug_module modules/mod_log_debug.so
        #LoadModule log_forensic_module modules/mod_log_forensic.so
        #LoadModule lua_module modules/mod_lua.so
        LoadModule mime_module modules/mod_mime.so
        #LoadModule mime_magic_module modules/mod_mime_magic.so
        LoadModule negotiation_module modules/mod_negotiation.so
        #LoadModule proxy_module modules/mod_proxy.so
        #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
        #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
        #LoadModule proxy_connect_module modules/mod_proxy_connect.so
        #LoadModule proxy_express_module modules/mod_proxy_express.so
        #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
        #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
        #LoadModule proxy_html_module modules/mod_proxy_html.so
        #LoadModule proxy_http_module modules/mod_proxy_http.so
        #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
        #LoadModule ratelimit_module modules/mod_ratelimit.so
        #LoadModule reflector_module modules/mod_reflector.so
        #LoadModule remoteip_module modules/mod_remoteip.so
        #LoadModule request_module modules/mod_request.so
        #LoadModule reqtimeout_module modules/mod_reqtimeout.so
        LoadModule rewrite_module modules/mod_rewrite.so
        #LoadModule sed_module modules/mod_sed.so
        #LoadModule session_module modules/mod_session.so
        #LoadModule session_cookie_module modules/mod_session_cookie.so
        #LoadModule session_crypto_module modules/mod_session_crypto.so
        #LoadModule session_dbd_module modules/mod_session_dbd.so
        LoadModule setenvif_module modules/mod_setenvif.so
        #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
        #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
        #LoadModule socache_dbm_module modules/mod_socache_dbm.so
        #LoadModule socache_memcache_module modules/mod_socache_memcache.so
        #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
        #LoadModule speling_module modules/mod_speling.so
        #LoadModule ssl_module modules/mod_ssl.so
        #LoadModule status_module modules/mod_status.so
        #LoadModule substitute_module modules/mod_substitute.so
        #LoadModule unique_id_module modules/mod_unique_id.so
        #LoadModule userdir_module modules/mod_userdir.so
        #LoadModule usertrack_module modules/mod_usertrack.so
        #LoadModule version_module modules/mod_version.so
        LoadModule vhost_alias_module modules/mod_vhost_alias.so
        #LoadModule watchdog_module modules/mod_watchdog.so
        #LoadModule xml2enc_module modules/mod_xml2enc.so

        LoadModule php5_module "c:/wamp/bin/php/php5.5.12/php5apache2_4.dll"
        #PHPIniDir c:/wamp/bin/php/php5.5.12

        <IfModule unixd_module>
        #
        # If you wish httpd to run as a different user or group, you must run
        # httpd as root initially and it will switch.  
        #
        # User/Group: The name (or #number) of the user/group to run httpd as.
        # It is usually good practice to create a dedicated user and group for
        # running httpd, as with most system services.
        #
        User daemon
        Group daemon

        </IfModule>

        # 'Main' server configuration
        #
        # The directives in this section set up the values used by the 'main'
        # server, which responds to any requests that aren't handled by a
        # <VirtualHost> definition.  These values also provide defaults for
        # any <VirtualHost> containers you may define later in the file.
        #
        # All of these directives may appear inside <VirtualHost> containers,
        # in which case these default settings will be overridden for the
        # virtual host being defined.
        #

        #
        # ServerAdmin: Your address, where problems with the server should be
        # e-mailed.  This address appears on some server-generated pages, such
        # as error documents.  e.g. admin@your-domain.com
        #
        ServerAdmin admin@example.com

        #
        # ServerName gives the name and port that the server uses to identify itself.
        # This can often be determined automatically, but we recommend you specify
        # it explicitly to prevent problems during startup.
        #
        # If your host doesn't have a registered DNS name, enter its IP address here.
        #
        ServerName localhost:8081

        HostnameLookups Off

        #
        # DocumentRoot: The directory out of which you will serve your
        # documents. By default, all requests are taken from this directory, but
        # symbolic links and aliases may be used to point to other locations.
        #
        DocumentRoot "c:/wamp/www/"

        #
        # Each directory to which Apache has access can be configured with respect
        # to which services and features are allowed and/or disabled in that
        # directory (and its subdirectories). 
        #
        # First, we configure the "default" to be a very restrictive set of 
        # features.  
        #
        <Directory />
            AllowOverride none
            Require all granted
            Require local
            Require ip 192.168.224
        </Directory>

        #
        # Note that from this point forward you must specifically allow
        # particular features to be enabled - so if something's not working as
        # you might expect, make sure that you have specifically enabled it
        # below.
        #

        <Directory "c:/wamp/www/">
            #
            # Possible values for the Options directive are "None", "All",
            # or any combination of:
            #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
            #
            # Note that "MultiViews" must be named *explicitly* --- "Options All"
            # doesn't give it to you.
            #
            # The Options directive is both complicated and important.  Please see
            # http://httpd.apache.org/docs/2.4/mod/core.html#options
            # for more information.
            #
            Options Indexes FollowSymLinks

            #
            # AllowOverride controls what directives may be placed in .htaccess files.
            # It can be "All", "None", or any combination of the keywords:
            #   AllowOverride FileInfo AuthConfig Limit
            #
            AllowOverride all

            #
            # Controls who can get stuff from this server.
            #

        #   onlineoffline tag - don't remove
            Require all granted

            Require local
            Require ip 192.168.224
        </Directory>

        #
        # DirectoryIndex: sets the file that Apache will serve if a directory
        # is requested.
        #
        <IfModule dir_module>
            DirectoryIndex index.php index.php3 index.html index.htm
        </IfModule>

        #
        # The following lines prevent .htaccess and .htpasswd files from being 
        # viewed by Web clients. 
        #
        <Files ".ht*">
            Require all granted
        </Files>

        #
        # ErrorLog: The location of the error log file.
        # If you do not specify an ErrorLog directive within a <VirtualHost>
        # container, error messages relating to that virtual host will be
        # logged here.  If you *do* define an error logfile for a <VirtualHost>
        # container, that host's errors will be logged there and not here.
        #
        #ErrorLog "logs/error.log"
        ErrorLog "c:/wamp/logs/apache_error.log"

        #
        # LogLevel: Control the number of messages logged to the error_log.
        # Possible values include: debug, info, notice, warn, error, crit,
        # alert, emerg.
        #
        LogLevel warn

        <IfModule log_config_module>
            #
            # The following directives define some format nicknames for use with
            # a CustomLog directive (see below).
            #
            LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
            LogFormat "%h %l %u %t \"%r\" %>s %b" common

            <IfModule logio_module>
              # You need to enable mod_logio.c to use %I and %O
              LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
            </IfModule>

            #
            # The location and format of the access logfile (Common Logfile Format).
            # If you do not define any access logfiles within a <VirtualHost>
            # container, they will be logged here.  Contrariwise, if you *do*
            # define per-<VirtualHost> access logfiles, transactions will be
            # logged therein and *not* in this file.
            #
            CustomLog "c:/wamp/logs/access.log" common

            #
            # If you prefer a logfile with access, agent, and referer information
            # (Combined Logfile Format) you can use the following directive.
            #
            #CustomLog "logs/access.log" combined
        </IfModule>

        <IfModule alias_module>
            #
            # Redirect: Allows you to tell clients about documents that used to 
            # exist in your server's namespace, but do not anymore. The client 
            # will make a new request for the document at its new location.
            # Example:
            # Redirect permanent /foo http://www.example.com/bar

            #
            # Alias: Maps web paths into filesystem paths and is used to
            # access content that does not live under the DocumentRoot.
            # Example:
            # Alias /webpath /full/filesystem/path
            #
            # If you include a trailing / on /webpath then the server will
            # require it to be present in the URL.  You will also likely
            # need to provide a <Directory> section to allow access to
            # the filesystem path.

            #
            # ScriptAlias: This controls which directories contain server scripts. 
            # ScriptAliases are essentially the same as Aliases, except that
            # documents in the target directory are treated as applications and
            # run by the server when requested rather than as documents sent to the
            # client.  The same rules about trailing "/" apply to ScriptAlias
            # directives as to Alias.
            #
            ScriptAlias /cgi-bin/ "c:/wamp/bin/apache/apache2.4.9/cgi-bin/"

        </IfModule>

        <IfModule cgid_module>
            #
            # ScriptSock: On threaded servers, designate the path to the UNIX
            # socket used to communicate with the CGI daemon of mod_cgid.
            #
            #Scriptsock cgisock
        </IfModule>

        #
        # "c:/wamp/bin/apache/apache2.4.9/cgi-bin" should be changed to whatever your ScriptAliased
        # CGI directory exists, if you have that configured.
        #
        <Directory "c:/wamp/bin/apache/apache2.4.9/cgi-bin">
            Require all granted
            Require local
            Require ip 192.168.224
        </Directory>

        <IfModule mime_module>
            #
            # TypesConfig points to the file containing the list of mappings from
            # filename extension to MIME-type.
            #
            TypesConfig conf/mime.types

            #
            # AddType allows you to add to or override the MIME configuration
            # file specified in TypesConfig for specific file types.
            #
            #AddType application/x-gzip .tgz
            #
            # AddEncoding allows you to have certain browsers uncompress
            # information on the fly. Note: Not all browsers support this.
            #
            AddEncoding x-compress .Z
            AddEncoding x-gzip .gz .tgz
            #
            # If the AddEncoding directives above are commented-out, then you
            # probably should define those extensions to indicate media types:
            #
            AddType application/x-compress .Z
            AddType application/x-gzip .gz .tgz
            AddType application/x-httpd-php .php
            AddType application/x-httpd-php .php3

            #
            # AddHandler allows you to map certain file extensions to "handlers":
            # actions unrelated to filetype. These can be either built into the server
            # or added with the Action directive (see below)
            #
            # To use CGI scripts outside of ScriptAliased directories:
            # (You will also need to add "ExecCGI" to the "Options" directive.)
            #
            #AddHandler cgi-script .cgi

            # For type maps (negotiated resources):
            #AddHandler type-map var

            #
            # Filters allow you to process content before it is sent to the client.
            #
            # To parse .shtml files for server-side includes (SSI):
            # (You will also need to add "Includes" to the "Options" directive.)
            #
            #AddType text/html .shtml
            #AddOutputFilter INCLUDES .shtml
        </IfModule>

        #
        # The mod_mime_magic module allows the server to use various hints from the
        # contents of the file itself to determine its type.  The MIMEMagicFile
        # directive tells the module where the hint definitions are located.
        #
        #MIMEMagicFile conf/magic

        #
        # Customizable error responses come in three flavors:
        # 1) plain text 2) local redirects 3) external redirects
        #
        # Some examples:
        #ErrorDocument 500 "The server made a boo boo."
        #ErrorDocument 404 /missing.html
        #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
        #ErrorDocument 402 http://www.example.com/subscription_info.html
        #

        #
        # MaxRanges: Maximum number of Ranges in a request before
        # returning the entire resource, or one of the special
        # values 'default', 'none' or 'unlimited'.
        # Default setting is to accept 200 Ranges.
        #MaxRanges unlimited

        #
        # EnableMMAP and EnableSendfile: On systems that support it, 
        # memory-mapping or the sendfile syscall may be used to deliver
        # files.  This usually improves server performance, but must
        # be turned off when serving from networked-mounted 
        # filesystems or if support for these functions is otherwise
        # broken on your system.
        # Defaults: EnableMMAP On, EnableSendfile Off
        #
        #EnableMMAP off
        EnableSendfile off

        # AcceptFilter: On Windows, none uses accept() rather than AcceptEx() and
        # will not recycle sockets between connections. This is useful for network
        # adapters with broken driver support, as well as some virtual network
        # providers such as vpn drivers, or spam, virus or spyware filters.
        AcceptFilter http none
        AcceptFilter https none

        # Supplemental configuration
        #
        # The configuration files in the conf/extra/ directory can be 
        # included to add extra features or to modify the default configuration of 
        # the server, or you may simply copy their contents here and change as 
        # necessary.

        # Server-pool management (MPM specific)
        #Include conf/extra/httpd-mpm.conf

        # Multi-language error messages
        #Include conf/extra/httpd-multilang-errordoc.conf

        # Fancy directory listings
        Include conf/extra/httpd-autoindex.conf

        # Language settings
        #Include conf/extra/httpd-languages.conf

        # User home directories
        #Include conf/extra/httpd-userdir.conf

        # Real-time info on requests and configuration
        #Include conf/extra/httpd-info.conf

        # Virtual hosts
        #Include conf/extra/httpd-vhosts.conf

        # Local access to the Apache HTTP Server Manual
        #Include conf/extra/httpd-manual.conf

        # Distributed authoring and versioning (WebDAV)
        #Include conf/extra/httpd-dav.conf

        # Various default settings
        #Include conf/extra/httpd-default.conf

        # Configure mod_proxy_html to understand HTML4/XHTML1
        <IfModule proxy_html_module>
        Include conf/extra/proxy-html.conf
        </IfModule>

        # Secure (SSL/TLS) connections
        #Include conf/extra/httpd-ssl.conf
        #
        # Note: The following must must be present to support
        #       starting without SSL on platforms with no /dev/random equivalent
        #       but a statically compiled-in mod_ssl.
        #
        <IfModule ssl_module>
        SSLRandomSeed startup builtin
        SSLRandomSeed connect builtin
        </IfModule>
        #
        # uncomment out the below to deal with user agents that deliberately
        # violate open standards by misusing DNT (DNT *must* be a specific
        # end-user choice)
        #
        #<IfModule setenvif_module>
        #BrowserMatch "MSIE 10.0;" bad_DNT
        #</IfModule>
        #<IfModule headers_module>
        #RequestHeader unset DNT env=bad_DNT
        #</IfModule>


        #IncludeOptional "c:/wamp/vhosts/*"
        Include "c:/wamp/alias/*"
  • 写回答

1条回答 默认 最新

  • dongle7637 2015-03-08 23:14
    关注

    Try changing Listen: 8081, restart all services, then make sure you are doing

    http://Your IP Address:8801
    
    评论

报告相同问题?

悬赏问题

  • ¥15 寻一个支付宝扫码远程授权登录的软件助手app
  • ¥15 解riccati方程组
  • ¥15 display:none;样式在嵌套结构中的已设置了display样式的元素上不起作用?
  • ¥30 用arduino开发esp32控制ps2手柄一直报错
  • ¥15 使用rabbitMQ 消息队列作为url源进行多线程爬取时,总有几个url没有处理的问题。
  • ¥15 求chat4.0解答一道线性规划题,用lingo编程运行,第一问要求写出数学模型和lingo语言编程模型,第二问第三问解答就行,我的ddl要到了谁来求了
  • ¥15 Ubuntu在安装序列比对软件STAR时出现报错如何解决
  • ¥50 树莓派安卓APK系统签名
  • ¥65 汇编语言除法溢出问题
  • ¥15 Visual Studio问题