Golang从序列读取

Question

I'm trying to read from a serial port (a GPS device on a Raspberry Pi).

Following the instructions from http://www.modmypi.com/blog/raspberry-pi-gps-hat-and-python

I can read from shell using

stty -F /dev/ttyAMA0 raw 9600 cs8 clocal -cstopb
cat /dev/ttyAMA0

I get well formatted output

$GNGLL,5133.35213,N,00108.27278,W,160345.00,A,A*65
$GNRMC,160346.00,A,5153.35209,N,00108.27286,W,0.237,,290418,,,A*75
$GNVTG,,T,,M,0.237,N,0.439,K,A*35
$GNGGA,160346.00,5153.35209,N,00108.27286,W,1,12,0.67,81.5,M,46.9,M,,*6C
$GNGSA,A,3,29,25,31,20,26,23,21,16,05,27,,,1.11,0.67,0.89*10
$GNGSA,A,3,68,73,83,74,84,75,85,67,,,,,1.11,0.67,0.89*1D
$GPGSV,4,1,15,04,,,34,05,14,040,21,09,07,330,,16,45,298,34*40
$GPGSV,4,2,15,20,14,127,18,21,59,154,30,23,07,295,26,25,13,123,22*74
$GPGSV,4,3,15,26,76,281,40,27,15,255,20,29,40,068,19,31,34,199,33*7C
$GPGSV,4,4,15,33,29,198,,36,23,141,,49,30,172,*4C
$GLGSV,3,1,11,66,00,325,,67,13,011,20,68,09,062,16,73,12,156,21*60
$GLGSV,3,2,11,74,62,177,20,75,53,312,36,76,08,328,,83,17,046,25*69
$GLGSV,3,3,11,84,75,032,22,85,44,233,32,,,,35*62
$GNGLL,5153.35209,N,00108.27286,W,160346.00,A,A*6C
$GNRMC,160347.00,A,5153.35205,N,00108.27292,W,0.216,,290418,,,A*7E
$GNVTG,,T,,M,0.216,N,0.401,K,A*3D
$GNGGA,160347.00,5153.35205,N,00108.27292,W,1,12,0.67,81.7,M,46.9,M,,*66
$GNGSA,A,3,29,25,31,20,26,23,21,16,05,27,,,1.11,0.67,0.89*10
$GNGSA,A,3,68,73,83,74,84,75,85,67,,,,,1.11,0.67,0.89*1D
$GPGSV,4,1,15,04,,,34,05,14,040,21,09,07,330,,16,45,298,34*40

(I've put some random data in)

I'm trying to read this in Go. Currently, I have

package main

import "fmt"
import "log"
import "github.com/tarm/serial"

func main() {
        config := &serial.Config{
                Name: "/dev/ttyAMA0",
                Baud: 9600,
                ReadTimeout: 1,
                Size: 8,
        }

        stream, err := serial.OpenPort(config)
        if err != nil {
                log.Fatal(err)
        }

        buf := make([]byte, 1024)

        for {
                n, err := stream.Read(buf)
                if err != nil {
                        log.Fatal(err)
                }
                s := string(buf[:n])
                fmt.Println(s)
        }
}

But this prints malformed data. I suspect that this is due to the buffer size or the value of Size in the config struct being wrong, but I'm not sure how to get those values from the stty settings.

Looking back, I think the issue is that I'm getting a stream and I want to be able to iterate over lines of the stty, rather than chunks. This is how the stream is outputted:

$GLGSV,3
,1,09,69
,10,017,
,70,43,0
69,,71,3
2,135,27
,76,23,2
32,22*6F

$GLGSV
,3,2,09,
77,35,30
0,21,78,
11,347,,
85,31,08
1,30,86,
72,355,3
6*6C
$G
LGSV,3,3
,09,87,2
4,285,30
*59
$GN
GLL,5153
.34919,N
,00108.2
7603,W,1
92901.00
,A,A*6A

Answer 1

The struct you get back from serial.OpenPort() contains a pointer to an open os.File corresponding to the opened serial port connection. When you Read() from this, the library calls Read() on the underlying os.File.

The documentation for this function call is:

Read reads up to len(b) bytes from the File. It returns the number of bytes read and any error encountered. At end of file, Read returns 0, io.EOF.

This means you have to keep track of how much data was read. You also have to keep track of whether there were newlines, if this is important to you. Unfortunately, the underlying *os.File is not exported, so you'll find it difficult to use tricks like bufio.ReadLine(). It may be worth modifying the library and sending a pull request.