移植wm8960声卡驱动,基于alsa框架,播放时出问题

这个启动内核时
[ 1.292527] ----wm8960_i2c_probe---
[ 1.295084] ---wm8960_register---
[ 1.810985] --s3c64xx_iis_dev_probe--
[ 1.811339] ---wm8960_probe---
[ 1.811388] GEC210 audio driver Playback mapping OK
[ 1.811516] playback = 1
[ 1.811541] capture = 1
[ 1.812051] GEC210 audio driver Capture mapping OK
[ 1.812182] playback = 1
[ 1.812488] capture = 1
[ 2.629128] ASoC: Failed to create HP-L/R debugfs file
[ 2.629178] ASoC: Failed to create Speaker-L/R debugfs file
[ 2.629406] ALSA device list:
[ 2.629435] #0: gec (WM8960)

但是在播放时:
./mplayer gecmusic.mp3
MPlayer 1.0rc2-4.5.1 (C) 2000-2007 MPlayer Team
CPU: ARM

正在播放 gecmusic.mp3。
检测到 Audio file 文件格式。
剪辑信息:
Title: 09 ▒▒▒▒▒
Artist: Ⱥ▒▒
Album: ▒▒ɣ▒▒▒ķ▒▒▒▒▒▒▒ WIZOR+SRS
Year: 2010
Comment:
Track: 9

Genre: Other

请求的音频编解码器族 mp3 不可用。
请在编译时启用它。
打开音频解码器: [ffmpeg] FFmpeg/libavcodec audio decoders
invalid new backstep 1006
AUDIO: 44100 Hz, 2 ch, s16le, 320.0 kbit/22.68% (ratio: 40000->176400)

已选音频编解码器: [ffmp3] afm: ffmpeg (FFmpeg MPEG layer-3 audio decoder)

[ 29.942517] GEC210 PSR=32 RFS=256 BFS=32
[ 29.942763] DmaAddr=@3fe60000 Total=131072bytes PrdSz=16384 #Prds=8 dma_area=0xff004000
[ 29.943235] GEC210 PSR=32 RFS=256 BFS=32
[ 29.943394] DmaAddr=@3fe60000 Total=131072bytes PrdSz=16384 #Prds=8 dma_area=0xff004000
[ 29.950284] GEC210 PSR=32 RFS=256 BFS=32
[ 29.953687] DmaAddr=@3fe60000 Total=131072bytes PrdSz=4096 #Prds=32 dma_area=0xff004000
[ 29.961894] GEC210 PSR=5 RFS=256 BFS=32
[ 29.965546] DmaAddr=@3fe60000 Total=131072bytes PrdSz=8192 #Prds=16 dma_area=0xff004000
[ 29.983618] s3c-pl330 s3c-pl330.2: Reset Channel-0 CS-20000f FTC-40000
[ 29.983690] s3c-pl330 s3c-pl330.2: pl330_submit_req:1282
[ 29.985161] s3c-pl330 s3c-pl330.2: s3c_pl330_submit:475!
[ 29.990476] s3c-pl330 s3c-pl330.2: pl330_submit_req:1282
[ 29.995733] s3c-pl330 s3c-pl330.2: s3c_pl330_submit:475!
AO: [oss] 44100Hz 2ch s16le (2 bytes per sample)
视频: 没视频
开始播放...
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1006
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1007
invalid new backstep 1007(05:18.0) ??,?%
invalid new backstep 1007
A: 0.0 (00.0) of 318.0 (05:18.0) 4.0%
就不动了,
cat *.wav > /dev/dsp 时会出现:
cat 。。。。input/output error
在 dev 目录下有这几个节点:dsp mixer controlC0 pcmC0D0c pcmC0D0p
pcmC0D1c pcmC0D1p seq timer.

c
Csdn user default icon
上传中...
上传图片
插入图片
抄袭、复制答案,以达到刷声望分或其他目的的行为,在CSDN问答是严格禁止的,一经发现立刻封号。是时候展现真正的技术了!
其他相关推荐
alsa声卡驱动移植(不把驱动移植进内核)
我想把alsa声卡驱动移植到一个板块上,请问该怎么移植呢 (想把驱动做成一个模块,该怎么操作--)
[声卡驱动]关于ALSA设备的打开过程
例如一个playback设备,ALSA-lib提供了snd_pcm_open()来打开它。 我想问的是snd_pcm_open()是封装了linux 的open()函数吗,从而调用到ALSA-drv的snd_pcm_playback_open()函数? snd_pcm_open()里没有看到它是怎么实现调用到驱动中的打开函数的。。。
linux alsa下实现同时录制、播放pcm???
大神们: 目的:在linux平台上实现同时录制、播放声音,要求播放的声音和录制的声音之间的延时小于5ms。 要实现这个要求的话,硬件上需要声卡支持全双工吗?软件上有无设计建议?linux系统延时能达到上述要求吗? 谢谢! 平台:linux 音频结构:alsa
alsa中声卡与设备的区别
$ cd /dev/snd $ ls -l crw-rw----+ 1 root audio 116, 8 2011-02-23 21:38 controlC0 crw-rw----+ 1 root audio 116, 4 2011-02-23 21:38 midiC0D0 crw-rw----+ 1 root audio 116, 7 2011-02-23 21:39 pcmC0D0c crw-rw----+ 1 root audio 116, 6 2011-02-23 21:56 pcmC0D0p crw-rw----+ 1 root audio 116, 5 2011-02-23 21:38 pcmC0D1p crw-rw----+ 1 root audio 116, 3 2011-02-23 21:38 seq crw-rw----+ 1 root audio 116, 2 2011-02-23 21:38 timer $ 我们可以看到以下设备文件: controlC0 --> 用于声卡的控制,例如通道选择,混音,麦克风的控制等 midiC0D0 --> 用于播放midi音频 pcmC0D0c --〉 用于录音的pcm设备 pcmC0D0p --〉 用于播放的pcm设备 seq --〉 音序器 timer --〉 定时器 C0D0我知道代表的是声卡0的设备0,那么声卡和设备的区别在哪,为什么要分声卡和设备?
线程通过alsa播放音乐
长时间程序运行出现![图片说明](https://img-ask.csdn.net/upload/201605/09/1462794278_530406.png) 线程死掉,请问各位大神是什么问题?
嵌入式的alsa 操作pcm 如何与 只能工作在master模式的pcm接口设备连接?
嵌入式的alsa 操作pcm 如何与 只能工作在master模式的pcm接口设备连接? 情况是这样的: 我在利用嵌入式linux平台的pcm接口与一个有 pcm接口的2G modem进行对接,希望linux可以采集和回访modem的语音, 现在物理连接已经对接,alsa也移植进去了,但是 两者不能真正建立连接,求牛人帮助,酬谢! qq 16245472 13751126325
alsa架构的usb麦克风在linux下读不到数据!!
最近项目买了一个USB摄像头带mic的小设备,在windows下设备测试没有问题,但是虚拟机下用ubuntu自带的系统声音测试时,可以识别设备音量却一直为0,在/proc/asound/card1里面也能看到设备正在runing,但就是没有声音。然后自己写了个小程序自己设置采集参数也读不到声音,卡在snd_pcm_read函数就不动了,也不返回结果。虚拟机读取笔记本自带的麦克没有问题。哪位碰到过这个问题的朋友能帮我指点一下呢?
如何配置树莓派3B+耳机孔播放,USB麦克风录音?
如何设置树莓派3B+默认使用USB麦克风录制音频,使用耳机孔输出音频? 我尝试过配置.asoundrc文件,修改usr/share/alsa/alsa.conf文件,添加etc/asound.conf文件,但都没有作用,还是默认以耳机孔作为录制来源,当然就录制不了任何声音。树莓派可以识别USB麦克风设备,只是无法将其设置为默认设备。我曾经设置成功过,但过了几天再开机发现不起作用了,怎么修改也不行。有没有好的方法可以分享?
linux 在线音乐播放器实现
在调研一个功能,想现在在linux 平台上实现在线音乐播放的功能,调研已有的alsa 和ffmpeg 似乎都可以实现MP3 或wav音频文件的播放,在线音乐播放可能涉及到缓存的技术和设计,暂时没有找到满意的方案。请教大家有谁了解或在做这方面技术的吗?有不错的第三方库也好,:)
ubuntu14.04 32位 编译展讯8810平台版本amixer.c的问题
看第一条error是说没有找到 alsa/asoundlib.h头文件,但是从别的文件夹拷贝过来放在alsa下编译还是出现同样的错误 请大神帮忙分析下是什么原因?谢谢 external/sprd/alsa/alsa-utils/amixer/amixer.c:30:28: error: alsa/asoundlib.h: No such file or directory external/sprd/alsa/alsa-utils/amixer/amixer.c: In function 'info': external/sprd/alsa/alsa-utils/amixer/amixer.c:86: error: 'snd_ctl_t' undeclared (first use in this function) external/sprd/alsa/alsa-utils/amiexternal/sprd/alsa/alsa-utils/amixer/amixer.c:30:28: error: alsa/asoundlib.h: No such file or directory external/sprd/alsa/alsa-utils/amixer/amixer.c: In function 'info': external/sprd/alsa/alsa-utils/amixer/amixer.c:86: error: 'snd_ctl_t' undeclared (first use in this function) external/sprd/alsa/alsa-utils/amixer/amixer.c:86: error: (Each undeclared identifier is reported only once external/sprd/alsa/alsa-utils/amixer/amixer.c:86: error: for each function it appears in.) external/sprd/alsa/alsa-utils/amixer/amixer.c:86: error: 'handle' undeclared (first use in this function) external/sprd/alsa/alsa-utils/amixer/amixer.c:87: error: 'snd_mixer_t' undeclared (first use in this function) external/sprd/alsa/alsa-utils/amixer/amixer.c:87: error: 'mhandle' undeclared (first use in this function)xer/amixer.c:86: error: (Each undeclared identifier is reported only once external/sprd/alsa/alsa-utils/amixer/amixer.c:86: error: for each function it appears in.) external/sprd/alsa/alsa-utils/amixer/amixer.c:86: error: 'handle' undeclared (first use in this function) external/sprd/alsa/alsa-utils/amixer/amixer.c:87: error: 'snd_mixer_t' undeclared (first use in this function) external/sprd/alsa/alsa-utils/amixer/amixer.c:87: error: 'mhandle' undeclared (first use in this function) 省略。。。。。
imx6q-3.14.52版本reboot不能成功重启板子
你好: 板子相关信息:imx6q 内核版本:3.14.52 我在板子启动之后执行reboot命令: root@imx6qsabresd:/# reboot The system is going down for reboot NOW! (ttymxc0) (Thu Sep 1 09:57:12 2016) INIT: Switching to runlevel: 6 INIT: Sending processes the TERM signal root@imx6qsabresd:/# Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 428) dropbear. * Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon ** (oprofile-server:487): WARNING **: Avahi error: Daemon connection fail[ ok ] Stopping advanced power management daemon: no /usr/sbin/apmd found; none killed apmd. Stopping system message bus: dbus. stopping mountd: done stopping nfsd: done Stopping OProfileUI server Stopping syslogd/klogd: stopped syslogd (pid 456) stopped klogd (pid 459) done stopping statd: done Stopping Telephony daemon ALSA: Storing mixer settings... Stopping rpcbind daemon... done. Stopping Linux NFC daemon Deconfiguring network interfaces... done. Sending all processes the TERM signal... logout Sending all processes the KILL signal... Unmounting remote filesystems... Deactivating swap... Unmounting local filesystems... Rebooting... reboot: Restarting system mxc_restart: Watchdog reset failed to assert reset 就卡在这个了地方。 我的板子运行频率是800Mhz,那个看门狗选择的工作模式是ldo-bypass ,看门狗2。 首先板子应该没有问题的,运行3.0.35的时候是reboot正常的,一切OK。就是3.14.52不成功。 我直接操作寄存器验证如下: 在打断uboot正常启动之后直接:=> mw.w 0x20bc000 0x34,可以正常复位启动,并且打印说Reset cause: WDOG。 在启动系统之后执行:root@imx6qsabresd:~# /unit_tests/memtool -16 0x20bc000=0x34 root@imx6qsabresd:~# /unit_tests/memtool -16 0x20bc000=0x34 Writing 16-bit value 0x34 to address 0x020BC000 root@imx6qsabresd:~# U-Boot 2015.04-imx_v2015.04_3.14.52_1.1.0_ga+g6cf684a (Sep 02 2016 - 18:29:31) CPU: Freescale i.MX6Q rev1.5 at 792 MHz CPU: Temperature 49 C Reset cause: WDOG Board: MX6-SabreSD I2C: ready DRAM: 1 GiB 能否给点建议!!谢谢呢!
android app读写音频数据时如何控制音频解码器?
android音频解码器通过alsa来控制;电话语音的流入流出、麦克风语音的流入、耳机语音的流出,app读写语音的流入流出都连着音频解码器。 我想要做到的是在电话已拨通,从而语音已可流入流出解码器后,让app也可读写语音。 从而让app写入的语音流到电话芯片里,让从电话芯片里流出的语音数据流到app里。 我的问题是如何在此时设置alsa呢? 或者如何实现自动应答的app?
android4.4.2 在文件管理器安装一个apk, 提示 “app not installed”
下面是log D/PowerManagerNotifier( 432): onUserActivity: event=2, uid=1000 D/Surface ( 1170): Surface::queueBuffer [ 0, 0, 1072, 1448] D/Surface ( 949): Surface::queueBuffer [ 0, 0, 580, 868] D/SurfaceFlinger( 100): doComposeSurfaces---count = 3, timer = 54708 D/hwcomposer( 100): --disp=0,ture_disp = 0, -psDisplay->force_flip=0 D/hwcomposer( 100): ---UpdateRectCount=2-sunxi_set commit_time = 2955605753867 D/hwcomposer( 100): -------commit_data.force_flip[0] =0 D/hwcomposer( 100): request ratate module err E/ion ( 100): ioctl c0084907 failed with code -1: Bad file number E/ion ( 100): ioctl c0084907 failed with code -1: Bad file number E/ion ( 100): ioctl c0084907 failed with code -1: Bad file number D/Surface ( 949): Surface::queueBuffer [290, 812, 572, 860] V/AudioSystem( 432): getFrameCount() streamType 1, output 2, frameCount 2048 I/ActivityManager( 432): START u0 {dat=file:///mnt/sdcard/com.unicom.zworeader.ui_540.apk cmp=com.android.packageinstaller/.InstallAppProgress (has extras)} from pid 949 D/PowerManagerNotifier( 432): onWakeLockAcquired: flags=1, tag="ActivityManager-Launch", packageName=android, ownerUid=1000, ownerPid=432, workSource=null D/PowerManagerService( 432): --------mCanUdatePowerState =true, mPowerState = 0 D/SurfaceFlinger( 100): doComposeSurfaces---count = 3, timer = 55541 D/hwcomposer( 100): --disp=0,ture_disp = 0, -psDisplay->force_flip=0 D/hwcomposer( 100): ---UpdateRectCount=1-sunxi_set commit_time = 2955685407992 D/hwcomposer( 100): -------commit_data.force_flip[0] =0 D/hwcomposer( 100): request ratate module err E/ion ( 100): ioctl c0084907 failed with code -1: Bad file number E/ion ( 100): ioctl c0084907 failed with code -1: Bad file number E/ion ( 100): ioctl c0084907 failed with code -1: Bad file number V/AudioSystem( 432): getOutputSamplingRate() reading from output desc V/AudioSystem( 432): getSamplingRate() streamType 1, output 2, sampling rate 48000 D/DisplayPowerController( 432): requestPowerState: screenState=2, useProximitySensor=false, screenBrightness=0, screenAutoBrightnessAdjustment=0.0, useAutoBrightness=false, blockScreenOn=false, waitForNegativeProximity=false V/AudioSystem( 432): getLatency() streamType 1, output 2, latency 85 V/AudioSystem( 432): getFrameCount() streamType 1, output 2, frameCount 2048 V/AudioSystem( 432): getOutputSamplingRate() reading from output desc V/AudioSystem( 432): getSamplingRate() streamType 1, output 2, sampling rate 48000 D/StatusBarManagerService( 432): java.lang.Throwable D/StatusBarManagerService( 432): at com.android.server.StatusBarManagerService.setSystemUiVisibility(StatusBarManagerService.java:334) D/StatusBarManagerService( 432): at com.android.internal.policy.impl.PhoneWindowManager$27.run(PhoneWindowManager.java:5767) D/StatusBarManagerService( 432): at android.os.Handler.handleCallback(Handler.java:733) D/StatusBarManagerService( 432): at android.os.Handler.dispatchMessage(Handler.java:95) D/StatusBarManagerService( 432): at android.os.Looper.loop(Looper.java:136) D/StatusBarManagerService( 432): at android.os.HandlerThread.run(HandlerThread.java:61) D/PhoneStatusBar( 481): showing the MENU button D/PowerManagerService( 432): --------mCanUdatePowerState =true, mPowerState = 0 D/codec_audio_speaker( 102): #################set_normal_path,headset_on =0,headphone_on =0,speaker_on =2 V/codec_audio_speaker( 102): in normal mode, headset or speaker on,****LINE:146,FUNC:set_normal_path D/codec_audio_speaker( 102): #################set_normal_volume,new_vol=63,headset_on =4,headphone_on =0,speaker_on =0 D/PowerManagerNotifier( 432): onWakeLockAcquired: flags=1, tag="AudioMix", packageName=media, ownerUid=0, ownerPid=102, workSource=null D/DisplayPowerController( 432): requestPowerState: screenState=2, useProximitySensor=false, screenBrightness=0, screenAutoBrightnessAdjustment=0.0, useAutoBrightness=false, blockScreenOn=false, waitForNegativeProximity=false V/codec_audio_speaker( 102): ****LINE:59,FUNC:set_normal_volume D/codec_audio_speaker( 102): #################set_normal_volume,new_vol=31,headset_on =0,headphone_on =0,speaker_on =2 V/codec_audio_speaker( 102): ****LINE:55,FUNC:set_normal_volume D/audio_hw_primary( 102): start_output_stream,l:1371, card:0, port:0,format:0,PCM_FORMAT_S16_LE=0,PCM_FORMAT_S24_LE=3,p_size:2048,p_count:4,channels:2, rate:48000 D/codec_audio_speaker( 102): #################get_normal_volume, headset_on =1096364328,headphone_on =4,speaker_on =0 V/codec_audio_speaker( 102): ****LINE:85,FUNC:get_normal_volume D/audio_hw_primary( 102): normal_get_play_volume nTmpVolume = 63 D/codec_audio_speaker( 102): #################set_normal_volume,new_vol=0,headset_on =4,headphone_on =0,speaker_on =0 V/codec_audio_speaker( 102): ****LINE:59,FUNC:set_normal_volume D/alsa_pcm( 102): pcm_open:,sparams.stop_threshold:6000, config->stop_threshold:0 D/codec_audio_speaker( 102): #################set_normal_volume,new_vol=63,headset_on =4,headphone_on =0,speaker_on =0 V/PhoneStatusBar( 481): setLightsOn(true) V/codec_audio_speaker( 102): ****LINE:59,FUNC:set_normal_volume D/PowerManagerNotifier( 432): onWakeLockReleased: flags=1, tag="AudioMix", packageName=media, ownerUid=0, ownerPid=102, workSource=null D/PowerManagerNotifier( 432): onWakeLockAcquired: flags=1, tag="AudioMix", packageName=media, ownerUid=0, ownerPid=102, workSource=WorkSource{1000} D/PhoneStatusBar( 481): setSystemUiVisibility vis=0 mask=1 oldVal=0 newVal=0 diff=0 D/Surface ( 949): Surface::queueBuffer [290, 812, 572, 860] D/PowerManagerNotifier( 432): onWakeLockReleased: flags=1, tag="AudioMix", packageName=media, ownerUid=0, ownerPid=102, workSource=WorkSource{1000} D/PowerManagerNotifier( 432): onWakeLockAcquired: flags=1, tag="AudioMix", packageName=media, ownerUid=0, ownerPid=102, workSource=null D/SurfaceFlinger( 100): doComposeSurfaces---count = 3, timer = 56250 D/hwcomposer( 100): --disp=0,ture_disp = 0, -psDisplay->force_flip=0 D/hwcomposer( 100): ---UpdateRectCount=1-sunxi_set commit_time = 2955805085575 D/hwcomposer( 100): -------commit_data.force_flip[0] =0 D/hwcomposer( 100): request ratate module err E/ion ( 100): ioctl c0084907 failed with code -1: Bad file number E/ion ( 100): ioctl c0084907 failed with code -1: Bad file number E/ion ( 100): ioctl c0084907 failed with code -1: Bad file number D/Process ( 432): setProcessGroup: ^^^ pid 966 (com.android.defcontainer)
Linux下 点对点语音对讲聊天,I电话工具,客户端与服务器之间连接IP地址可以进行通话
Linux下 点对点语音对讲聊天,I电话工具,客户端与服务器之间连接IP地址可以进行通话 协议随便 alsa 
linux sparc 架构PCI设备能找到设备,但无法分配可用资源。
[ 0.000000] ###INFO: ***************Welcom to MyKernel*************** [ 0.000000] ###INFO: Build on Sep 5 2014, 04:56:28 [ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 1.0.0 2013/06/08 09:37' [ 0.000000] PROMLIB: Root node compatible: sun4v [ 0.000000] Linux version 2.6.32.20 (root@localhost.localdomain) (gcc version 4.4.3 20100121 (Red Hat 4.4.3-3) (GCC) ) #8 SMP Fri Sep 5 04:56:43 CST 2014 [ 0.000000] bootconsole [btext0] enabled [ 0.000000] ARCH: SUN4V [ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image. [ 0.000000] Remapping the kernel... done. [ 0.000000] OF stdout device is: /pci@0/pci@0/display@0 [ 0.000000] PROM: Built device tree with 151492 bytes of memory. [ 0.000000] MDESC: Size is 34720 bytes. [ 0.000000] PLATFORM: banner-name [YH FT-1000 Platform] [ 0.000000] PLATFORM: name [YH FT-1000 Platform] [ 0.000000] PLATFORM: hostid [83f9edf0] [ 0.000000] PLATFORM: serial# [00ab4130] [ 0.000000] PLATFORM: stick-frequency [3b9aca00] [ 0.000000] PLATFORM: mac-address [144ff9edf0] [ 0.000000] PLATFORM: watchdog-resolution [1000 ms] [ 0.000000] PLATFORM: watchdog-max-timeout [31536000000 ms] [ 0.000000] PLATFORM: max-cpus [256] [ 0.000000] Top of RAM: 0xff82e000, Total RAM: 0xfb3c6000 [ 0.000000] Memory hole size: 68MB [ 0.000000] [0000010000000000-fffff80005000000] page_structs=131072 node=0 entry=0/0 [ 0.000000] [0000010000000000-fffff80005400000] page_structs=131072 node=0 entry=1/0 [ 0.000000] [0000010000800000-fffff80005800000] page_structs=131072 node=0 entry=2/0 [ 0.000000] [0000010000800000-fffff80005c00000] page_structs=131072 node=0 entry=3/0 [ 0.000000] [0000010001000000-fffff80006000000] page_structs=131072 node=0 entry=4/0 [ 0.000000] [0000010001000000-fffff80006400000] page_structs=131072 node=0 entry=5/0 [ 0.000000] [0000010001800000-fffff80006800000] page_structs=131072 node=0 entry=6/0 [ 0.000000] [0000010001800000-fffff80006c00000] page_structs=131072 node=0 entry=7/0 [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00002200 -> 0x0007fc17 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00002200 -> 0x0007fbd2 [ 0.000000] 0: 0x0007fbd8 -> 0x0007fbe8 [ 0.000000] 0: 0x0007fc16 -> 0x0007fc17 [ 0.000000] On node 0 totalpages: 514531 [ 0.000000] Normal zone: 4021 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 510510 pages, LIFO batch:15 [ 0.000000] Booting Linux... [ 0.000000] PERCPU: Embedded 7 pages/cpu @fffff80007000000 s25920 r8192 d23232 u65536 [ 0.000000] pcpu-alloc: s25920 r8192 d23232 u65536 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510510 [ 0.000000] Kernel command line: root=/dev/mapper/VolGroup-lv_root ro LANG=zh_CN.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet selinux=0 [ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 9, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 8, 2097152 bytes) [ 0.000000] Memory: 4048080k available (4048k kernel code, 2832k data, 232k init) [fffff80000000000,00000000ff82e000] [ 0.000000] SLUB: Genslabs=14, HWalign=32, Order=0-3, MinObjects=0, CPUs=64, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:255 [ 0.000000] clocksource: mult[10000] shift[16] [ 0.000000] clockevent: mult[80000000] shift[31] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 40.725938] Calibrating delay using timer specific routine.. 2002.12 BogoMIPS (lpj=10010649) [ 40.726151] Mount-cache hash table entries: 512 [ 40.742607] Brought up 32 CPUs [ 40.748046] ldc.c:v1.1 (July 22, 2008) [ 40.749322] NET: Registered protocol family 16 [ 40.781504] VIO: Adding device channel-devices, parent = NO [ 40.784457] FeiTeng board init [ 40.784515] the processor type:FT1000a, board:ft1000a_gw,FT USER VERSION: |渄??-#M7+酾h [ 40.784900] Testing NMI watchdog ... OK. [ 40.984975] Performance events: Supported PMU type is 'FT' [ 41.001527] pci_sun4v: Registered hvapi major[1] minor[0] [ 41.001913] /pci@0: SUN4V PCI Bus Module [ 41.001928] /pci@0: On NUMA node -1 [ 41.001944] /pci@0: PCI IO[c810000000] MEM[ca00000000] [ 41.062546] /pci@0: Imported 19 TSB entries from OBP [ 41.064105] /pci@0: MSI Queue first[0] num[36] count[128] devino[0x18] [ 41.064125] /pci@0: MSI first[0] num[256] mask[0xff] width[32] [ 41.064143] /pci@0: MSI addr32[0x7fff0000:0x10000] addr64[0x3ffff0000:0x10000] [ 41.064160] /pci@0: MSI queues at RA [00000000fab00000] [ 41.064179] PCI: Scanning PBM /pci@0 [ 41.064592] PCI: scan_bus[/pci@0] bus no 0 [ 41.064607] * /pci@0/pci@0 [ 41.064688] create device, devfn: 0, type: pciex [ 41.064737] class: 0x60400 device name: 0000:00:00.0 [ 41.064757] parse addresses (20 bytes) @ fffff800ff7bab40 [ 41.064774] start: ca00100000, end: ca0010ffff, i: 38 [ 41.064786] adding to system ... [ 41.064831] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.064872] pci 0000:00:00.0: supports D1 [ 41.064889] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 41.064908] pci 0000:00:00.0: PME# disabled [ 41.064929] PCI: dev header type: 1 [ 41.064940] of_scan_pci_bridge(/pci@0/pci@0) [ 41.064966] bus name: PCI Bus 0000:01 [ 41.064979] PCI: scan_bus[/pci@0/pci@0] bus no 1 [ 41.064992] * /pci@0/pci@0/display@0 [ 41.065042] create device, devfn: 0, type: display [ 41.065089] class: 0x30000 device name: 0000:01:00.0 [ 41.065106] parse addresses (80 bytes) @ fffff800ff7b9680 [ 41.065123] start: ca10000000, end: ca1fffffff, i: 10 [ 41.065138] start: ca00200000, end: ca0021ffff, i: 18 [ 41.065153] start: c810001000, end: c8100010ff, i: 20 [ 41.065168] start: ca00220000, end: ca0023ffff, i: 30 [ 41.065180] adding to system ... [ 41.065212] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.065261] pci 0000:01:00.0: supports D1 D2 [ 41.065288] PCI: dev header type: 0 [ 41.065300] * /pci@0/pci@1 [ 41.065349] create device, devfn: 8, type: pciex [ 41.065391] class: 0x60400 device name: 0000:00:01.0 [ 41.065412] parse addresses (20 bytes) @ fffff800ff7b8800 [ 41.065428] start: ca00110000, end: ca0011ffff, i: 38 [ 41.065442] adding to system ... [ 41.065472] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.065509] pci 0000:00:01.0: supports D1 [ 41.065524] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 41.065542] pci 0000:00:01.0: PME# disabled [ 41.065562] PCI: dev header type: 1 [ 41.065572] of_scan_pci_bridge(/pci@0/pci@1) [ 41.065596] bus name: PCI Bus 0000:02 [ 41.065609] PCI: scan_bus[/pci@0/pci@1] bus no 2 [ 41.065622] * /pci@0/pci@1/pci@0 [ 41.065672] create device, devfn: 0, type: pciex [ 41.065721] class: 0x60400 device name: 0000:02:00.0 [ 41.065738] parse addresses (20 bytes) @ fffff800ff7b7800 [ 41.065754] start: ca20000000, end: ca2001ffff, i: 10 [ 41.065766] adding to system ... [ 41.065796] pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.065858] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 41.065877] pci 0000:02:00.0: PME# disabled [ 41.065909] PCI: dev header type: 1 [ 41.065920] of_scan_pci_bridge(/pci@0/pci@1/pci@0) [ 41.065945] bus name: PCI Bus 0000:03 [ 41.065958] PCI: scan_bus[/pci@0/pci@1/pci@0] bus no 3 [ 41.065971] * /pci@0/pci@1/pci@0/pci@1 [ 41.066022] create device, devfn: 8, type: pciex [ 41.066071] class: 0x60400 device name: 0000:03:01.0 [ 41.066086] adding to system ... [ 41.066116] pci 0000:03:01.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.066178] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 41.066197] pci 0000:03:01.0: PME# disabled [ 41.066229] PCI: dev header type: 1 [ 41.066241] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@1) [ 41.066268] bus name: PCI Bus 0000:04 [ 41.066281] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@1] bus no 4 [ 41.066295] * /pci@0/pci@1/pci@0/pci@1/ethernet@0 [ 41.066348] create device, devfn: 0, type: [ 41.066399] class: 0x20000 device name: 0000:04:00.0 [ 41.066417] parse addresses (80 bytes) @ fffff800ff7b5740 [ 41.066435] start: ca20100000, end: ca2011ffff, i: 10 [ 41.066450] start: ca20120000, end: ca2013ffff, i: 14 [ 41.066467] start: c810002000, end: c81000201f, i: 18 [ 41.066482] start: ca20140000, end: ca2015ffff, i: 30 [ 41.066494] adding to system ... [ 41.066525] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.066592] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 41.066612] pci 0000:04:00.0: PME# disabled [ 41.066643] PCI: dev header type: 0 [ 41.066655] * /pci@0/pci@1/pci@0/pci@1/ethernet@0,1 [ 41.066709] create device, devfn: 1, type: [ 41.066760] class: 0x20000 device name: 0000:04:00.1 [ 41.066777] parse addresses (80 bytes) @ fffff800ff7b4a80 [ 41.066793] start: ca20160000, end: ca2017ffff, i: 10 [ 41.066809] start: ca20180000, end: ca2019ffff, i: 14 [ 41.066824] start: c810002020, end: c81000203f, i: 18 [ 41.066839] start: ca201a0000, end: ca201bffff, i: 30 [ 41.066851] adding to system ... [ 41.066881] pci 0000:04:00.1: calling quirk_resource_alignment+0x0/0x1a4 [ 41.066948] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 41.066967] pci 0000:04:00.1: PME# disabled [ 41.066999] PCI: dev header type: 0 [ 41.067011] * /pci@0/pci@1/pci@0/pci@4 [ 41.067063] create device, devfn: 20, type: pciex [ 41.067113] class: 0x60400 device name: 0000:03:04.0 [ 41.067127] adding to system ... [ 41.067157] pci 0000:03:04.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.067219] pci 0000:03:04.0: PME# supported from D0 D3hot D3cold [ 41.067238] pci 0000:03:04.0: PME# disabled [ 41.067270] PCI: dev header type: 1 [ 41.067281] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4) [ 41.067306] bus name: PCI Bus 0000:05 [ 41.067319] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4] bus no 5 [ 41.067334] * /pci@0/pci@1/pci@0/pci@4/pci@0 [ 41.067387] create device, devfn: 0, type: pciex [ 41.067439] class: 0x60400 device name: 0000:05:00.0 [ 41.067455] parse addresses (20 bytes) @ fffff800ff7b2d40 [ 41.067473] start: ca20200000, end: ca2021ffff, i: 10 [ 41.067485] adding to system ... [ 41.067517] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.067586] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 41.067606] pci 0000:05:00.0: PME# disabled [ 41.067640] PCI: dev header type: 1 [ 41.067651] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0) [ 41.067677] bus name: PCI Bus 0000:06 [ 41.067690] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0] bus no 6 [ 41.067705] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@1 [ 41.067760] create device, devfn: 8, type: pciex [ 41.067812] class: 0x60400 device name: 0000:06:01.0 [ 41.067826] adding to system ... [ 41.067856] pci 0000:06:01.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.067924] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold [ 41.067943] pci 0000:06:01.0: PME# disabled [ 41.067978] PCI: dev header type: 1 [ 41.067989] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@1) [ 41.068015] bus name: PCI Bus 0000:07 [ 41.068029] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@1] bus no 7 [ 41.068045] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@3 [ 41.068100] create device, devfn: 18, type: pciex [ 41.068153] class: 0x60400 device name: 0000:06:03.0 [ 41.068167] adding to system ... [ 41.068197] pci 0000:06:03.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.068265] pci 0000:06:03.0: PME# supported from D0 D3hot D3cold [ 41.068285] pci 0000:06:03.0: PME# disabled [ 41.068319] PCI: dev header type: 1 [ 41.068330] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@3) [ 41.068357] bus name: PCI Bus 0000:08 [ 41.068370] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@3] bus no 8 [ 41.068387] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@a [ 41.068442] create device, devfn: 50, type: pciex [ 41.068494] class: 0x60400 device name: 0000:06:0a.0 [ 41.068508] adding to system ... [ 41.068539] pci 0000:06:0a.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.068610] pci 0000:06:0a.0: PME# supported from D0 D3hot D3cold [ 41.068631] pci 0000:06:0a.0: PME# disabled [ 41.068666] PCI: dev header type: 1 [ 41.068678] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@a) [ 41.068703] bus name: PCI Bus 0000:09 [ 41.068717] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@a] bus no 9 [ 41.068733] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b [ 41.068789] create device, devfn: 58, type: pciex [ 41.068842] class: 0x60400 device name: 0000:06:0b.0 [ 41.068856] adding to system ... [ 41.068886] pci 0000:06:0b.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.068954] pci 0000:06:0b.0: PME# supported from D0 D3hot D3cold [ 41.068974] pci 0000:06:0b.0: PME# disabled [ 41.069008] PCI: dev header type: 1 [ 41.069019] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@b) [ 41.069046] bus name: PCI Bus 0000:0a [ 41.069059] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@b] bus no 10 [ 41.069075] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0 [ 41.069132] create device, devfn: 0, type: ohci [ 41.069192] class: 0xc0310 device name: 0000:0a:00.0 [ 41.069209] parse addresses (20 bytes) @ fffff800ff7a1dc0 [ 41.069225] start: ca20300000, end: ca20301fff, i: 10 [ 41.069237] adding to system ... [ 41.069263] pci 0000:0a:00.0: calling quirk_netmos+0x0/0x104 [ 41.069291] pci 0000:0a:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.069375] pci 0000:0a:00.0: supports D1 D2 [ 41.069391] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 41.069412] pci 0000:0a:00.0: PME# disabled [ 41.069449] PCI: dev header type: 0 [ 41.069461] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,1 [ 41.069521] create device, devfn: 1, type: ehci [ 41.069582] class: 0xc0320 device name: 0000:0a:00.1 [ 41.069603] parse addresses (20 bytes) @ fffff800ff79e740 [ 41.069621] start: ca20302000, end: ca20303fff, i: 10 [ 41.069633] adding to system ... [ 41.069658] pci 0000:0a:00.1: calling quirk_netmos+0x0/0x104 [ 41.069686] pci 0000:0a:00.1: calling quirk_resource_alignment+0x0/0x1a4 [ 41.069770] pci 0000:0a:00.1: supports D1 D2 [ 41.069787] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 41.069807] pci 0000:0a:00.1: PME# disabled [ 41.069844] PCI: dev header type: 0 [ 41.069856] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,2 [ 41.069915] create device, devfn: 2, type: ohci [ 41.069976] class: 0xc0310 device name: 0000:0a:00.2 [ 41.069993] parse addresses (20 bytes) @ fffff800ff79d980 [ 41.070009] start: ca20304000, end: ca20305fff, i: 10 [ 41.070021] adding to system ... [ 41.070047] pci 0000:0a:00.2: calling quirk_netmos+0x0/0x104 [ 41.070075] pci 0000:0a:00.2: calling quirk_resource_alignment+0x0/0x1a4 [ 41.070159] pci 0000:0a:00.2: supports D1 D2 [ 41.070175] pci 0000:0a:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 41.070195] pci 0000:0a:00.2: PME# disabled [ 41.070233] PCI: dev header type: 0 [ 41.070245] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,3 [ 41.070304] create device, devfn: 3, type: ehci [ 41.070365] class: 0xc0320 device name: 0000:0a:00.3 [ 41.070382] parse addresses (20 bytes) @ fffff800ff79cbc0 [ 41.070398] start: ca20306000, end: ca20307fff, i: 10 [ 41.070410] adding to system ... [ 41.070435] pci 0000:0a:00.3: calling quirk_netmos+0x0/0x104 [ 41.070463] pci 0000:0a:00.3: calling quirk_resource_alignment+0x0/0x1a4 [ 41.070547] pci 0000:0a:00.3: supports D1 D2 [ 41.070563] pci 0000:0a:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 41.070583] pci 0000:0a:00.3: PME# disabled [ 41.070620] PCI: dev header type: 0 [ 41.070634] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,4 [ 41.070700] create device, devfn: 4, type: ohci [ 41.070761] class: 0xc0310 device name: 0000:0a:00.4 [ 41.070777] parse addresses (20 bytes) @ fffff800ff79be00 [ 41.070793] start: ca20308000, end: ca20309fff, i: 10 [ 41.070805] adding to system ... [ 41.070831] pci 0000:0a:00.4: calling quirk_netmos+0x0/0x104 [ 41.070859] pci 0000:0a:00.4: calling quirk_resource_alignment+0x0/0x1a4 [ 41.070943] pci 0000:0a:00.4: supports D1 D2 [ 41.070959] pci 0000:0a:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 41.070979] pci 0000:0a:00.4: PME# disabled [ 41.071016] PCI: dev header type: 0 [ 41.071028] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,5 [ 41.071089] create device, devfn: 5, type: ehci [ 41.071150] class: 0xc0320 device name: 0000:0a:00.5 [ 41.071167] parse addresses (20 bytes) @ fffff800ff79b040 [ 41.071183] start: ca2030a000, end: ca2030bfff, i: 10 [ 41.071195] adding to system ... [ 41.071220] pci 0000:0a:00.5: calling quirk_netmos+0x0/0x104 [ 41.071248] pci 0000:0a:00.5: calling quirk_resource_alignment+0x0/0x1a4 [ 41.071332] pci 0000:0a:00.5: supports D1 D2 [ 41.071348] pci 0000:0a:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 41.071369] pci 0000:0a:00.5: PME# disabled [ 41.071406] PCI: dev header type: 0 [ 41.071418] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,6 [ 41.071481] create device, devfn: 6, type: ohci [ 41.071542] class: 0xc0310 device name: 0000:0a:00.6 [ 41.071559] parse addresses (20 bytes) @ fffff800ff798a40 [ 41.071575] start: ca2030c000, end: ca2030dfff, i: 10 [ 41.071587] adding to system ... [ 41.071612] pci 0000:0a:00.6: calling quirk_netmos+0x0/0x104 [ 41.071640] pci 0000:0a:00.6: calling quirk_resource_alignment+0x0/0x1a4 [ 41.071726] pci 0000:0a:00.6: supports D1 D2 [ 41.071744] pci 0000:0a:00.6: PME# supported from D0 D1 D2 D3hot D3cold [ 41.071766] pci 0000:0a:00.6: PME# disabled [ 41.071803] PCI: dev header type: 0 [ 41.071815] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@b/usb@0,7 [ 41.071878] create device, devfn: 7, type: ehci [ 41.071957] class: 0xc0320 device name: 0000:0a:00.7 [ 41.071975] parse addresses (20 bytes) @ fffff800ff797c80 [ 41.071991] start: ca2030e000, end: ca2030ffff, i: 10 [ 41.072003] adding to system ... [ 41.072029] pci 0000:0a:00.7: calling quirk_netmos+0x0/0x104 [ 41.072057] pci 0000:0a:00.7: calling quirk_resource_alignment+0x0/0x1a4 [ 41.072141] pci 0000:0a:00.7: supports D1 D2 [ 41.072157] pci 0000:0a:00.7: PME# supported from D0 D1 D2 D3hot D3cold [ 41.072178] pci 0000:0a:00.7: PME# disabled [ 41.072215] PCI: dev header type: 0 [ 41.072227] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@c [ 41.072291] create device, devfn: 60, type: pciex [ 41.072343] class: 0x60400 device name: 0000:06:0c.0 [ 41.072358] adding to system ... [ 41.072389] pci 0000:06:0c.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.072459] pci 0000:06:0c.0: PME# supported from D0 D3hot D3cold [ 41.072479] pci 0000:06:0c.0: PME# disabled [ 41.072514] PCI: dev header type: 1 [ 41.072525] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@c) [ 41.072553] bus name: PCI Bus 0000:0b [ 41.072566] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@c] bus no 11 [ 41.072583] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@d [ 41.072647] create device, devfn: 68, type: pciex [ 41.072700] class: 0x60400 device name: 0000:06:0d.0 [ 41.072714] adding to system ... [ 41.072751] pci 0000:06:0d.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.072819] pci 0000:06:0d.0: PME# supported from D0 D3hot D3cold [ 41.072840] pci 0000:06:0d.0: PME# disabled [ 41.072876] PCI: dev header type: 1 [ 41.072888] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@d) [ 41.072915] bus name: PCI Bus 0000:0c [ 41.072929] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@d] bus no 12 [ 41.072945] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@e [ 41.073010] create device, devfn: 70, type: pciex [ 41.073063] class: 0x60400 device name: 0000:06:0e.0 [ 41.073077] adding to system ... [ 41.073107] pci 0000:06:0e.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.073176] pci 0000:06:0e.0: PME# supported from D0 D3hot D3cold [ 41.073196] pci 0000:06:0e.0: PME# disabled [ 41.073230] PCI: dev header type: 1 [ 41.073242] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@e) [ 41.073268] bus name: PCI Bus 0000:0d [ 41.073282] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@e] bus no 13 [ 41.073298] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@f [ 41.073365] create device, devfn: 78, type: pciex [ 41.073419] class: 0x60400 device name: 0000:06:0f.0 [ 41.073433] adding to system ... [ 41.073464] pci 0000:06:0f.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.073532] pci 0000:06:0f.0: PME# supported from D0 D3hot D3cold [ 41.073551] pci 0000:06:0f.0: PME# disabled [ 41.073586] PCI: dev header type: 1 [ 41.073598] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@f) [ 41.073624] bus name: PCI Bus 0000:0e [ 41.073638] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@f] bus no 14 [ 41.073654] * /pci@0/pci@1/pci@0/pci@4/pci@0/pci@2 [ 41.073720] create device, devfn: 10, type: pciex [ 41.073772] class: 0x60400 device name: 0000:06:02.0 [ 41.073788] adding to system ... [ 41.073823] pci 0000:06:02.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.073892] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold [ 41.073912] pci 0000:06:02.0: PME# disabled [ 41.073946] PCI: dev header type: 1 [ 41.073958] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@4/pci@0/pci@2) [ 41.073985] bus name: PCI Bus 0000:0f [ 41.073998] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@4/pci@0/pci@2] bus no 15 [ 41.074015] * /pci@0/pci@1/pci@0/pci@4/pciex10b5,8619@0,1 [ 41.074082] create device, devfn: 1, type: [ 41.074133] class: 0x88000 device name: 0000:05:00.1 [ 41.074150] parse addresses (20 bytes) @ fffff800ff792040 [ 41.074166] start: ca20220000, end: ca2023ffff, i: 10 [ 41.074178] adding to system ... [ 41.074208] pci 0000:05:00.1: calling quirk_resource_alignment+0x0/0x1a4 [ 41.074296] PCI: dev header type: 0 [ 41.074309] * /pci@0/pci@1/pci@0/pci@5 [ 41.074375] create device, devfn: 28, type: pciex [ 41.074425] class: 0x60400 device name: 0000:03:05.0 [ 41.074440] adding to system ... [ 41.074470] pci 0000:03:05.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.074533] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold [ 41.074552] pci 0000:03:05.0: PME# disabled [ 41.074584] PCI: dev header type: 1 [ 41.074595] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@5) [ 41.074620] bus name: PCI Bus 0000:10 [ 41.074633] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@5] bus no 16 [ 41.074648] * /pci@0/pci@1/pci@0/pci@5/pci@0 [ 41.074714] create device, devfn: 0, type: pciex [ 41.074773] class: 0x60400 device name: 0000:10:00.0 [ 41.074788] adding to system ... [ 41.074818] pci 0000:10:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.074886] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 41.074906] pci 0000:10:00.0: PME# disabled [ 41.074948] PCI: dev header type: 1 [ 41.074959] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@5/pci@0) [ 41.074993] bus name: PCI Bus 0000:11 [ 41.075007] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@5/pci@0] bus no 17 [ 41.075023] * /pci@0/pci@1/pci@0/pci@5/pci@0/interrupt-controller@8 [ 41.075094] create device, devfn: 40, type: [ 41.075134] class: 0x80000 device name: 0000:11:08.0 [ 41.075151] parse addresses (20 bytes) @ fffff800ff78f540 [ 41.075167] start: 0, end: 0, i: 10 [ 41.075177] adding to system ... [ 41.075207] pci 0000:11:08.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.075237] PCI: dev header type: 0 [ 41.075250] * /pci@0/pci@1/pci@0/pci@6 [ 41.075318] create device, devfn: 30, type: pciex [ 41.075368] class: 0x60400 device name: 0000:03:06.0 [ 41.075383] adding to system ... [ 41.075413] pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.075475] pci 0000:03:06.0: PME# supported from D0 D3hot D3cold [ 41.075494] pci 0000:03:06.0: PME# disabled [ 41.075526] PCI: dev header type: 1 [ 41.075537] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@6) [ 41.075562] bus name: PCI Bus 0000:12 [ 41.075575] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@6] bus no 18 [ 41.075590] * /pci@0/pci@1/pci@0/pci@7 [ 41.075657] create device, devfn: 38, type: pciex [ 41.075706] class: 0x60400 device name: 0000:03:07.0 [ 41.075720] adding to system ... [ 41.075751] pci 0000:03:07.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.075813] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold [ 41.075832] pci 0000:03:07.0: PME# disabled [ 41.075864] PCI: dev header type: 1 [ 41.075877] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@7) [ 41.075906] bus name: PCI Bus 0000:13 [ 41.075920] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@7] bus no 19 [ 41.075934] * /pci@0/pci@1/pci@0/pci@8 [ 41.076009] create device, devfn: 40, type: pciex [ 41.076060] class: 0x60400 device name: 0000:03:08.0 [ 41.076074] adding to system ... [ 41.076104] pci 0000:03:08.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.076167] pci 0000:03:08.0: PME# supported from D0 D3hot D3cold [ 41.076186] pci 0000:03:08.0: PME# disabled [ 41.076218] PCI: dev header type: 1 [ 41.076229] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@8) [ 41.076254] bus name: PCI Bus 0000:14 [ 41.076267] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@8] bus no 20 [ 41.076282] * /pci@0/pci@1/pci@0/pci@9 [ 41.076350] create device, devfn: 48, type: pciex [ 41.076400] class: 0x60400 device name: 0000:03:09.0 [ 41.076414] adding to system ... [ 41.076444] pci 0000:03:09.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.076507] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold [ 41.076525] pci 0000:03:09.0: PME# disabled [ 41.076557] PCI: dev header type: 1 [ 41.076568] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@9) [ 41.076593] bus name: PCI Bus 0000:15 [ 41.076606] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@9] bus no 21 [ 41.076621] * /pci@0/pci@1/pci@0/pci@a [ 41.076689] create device, devfn: 50, type: pciex [ 41.076739] class: 0x60400 device name: 0000:03:0a.0 [ 41.076753] adding to system ... [ 41.076783] pci 0000:03:0a.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.076846] pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold [ 41.076865] pci 0000:03:0a.0: PME# disabled [ 41.076897] PCI: dev header type: 1 [ 41.076908] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@a) [ 41.076936] bus name: PCI Bus 0000:16 [ 41.076950] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@a] bus no 22 [ 41.076964] * /pci@0/pci@1/pci@0/pci@2 [ 41.077033] create device, devfn: 10, type: pciex [ 41.077084] class: 0x60400 device name: 0000:03:02.0 [ 41.077098] adding to system ... [ 41.077128] pci 0000:03:02.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.077190] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold [ 41.077209] pci 0000:03:02.0: PME# disabled [ 41.077241] PCI: dev header type: 1 [ 41.077252] of_scan_pci_bridge(/pci@0/pci@1/pci@0/pci@2) [ 41.077277] bus name: PCI Bus 0000:17 [ 41.077290] PCI: scan_bus[/pci@0/pci@1/pci@0/pci@2] bus no 23 [ 41.077305] * /pci@0/pci@1/pci@0/pci@2/ethernet@0 [ 41.077377] create device, devfn: 0, type: [ 41.077429] class: 0x20000 device name: 0000:17:00.0 [ 41.077445] parse addresses (80 bytes) @ fffff800ff788680 [ 41.077462] start: ca20400000, end: ca2041ffff, i: 10 [ 41.077477] start: ca20420000, end: ca2043ffff, i: 14 [ 41.077492] start: c810003000, end: c81000301f, i: 18 [ 41.077507] start: ca20440000, end: ca2045ffff, i: 30 [ 41.077519] adding to system ... [ 41.077550] pci 0000:17:00.0: calling quirk_resource_alignment+0x0/0x1a4 [ 41.077617] pci 0000:17:00.0: PME# supported from D0 D3hot D3cold [ 41.077637] pci 0000:17:00.0: PME# disabled [ 41.077668] PCI: dev header type: 0 [ 41.077680] * /pci@0/pci@1/pci@0/pci@2/ethernet@0,1 [ 41.077752] create device, devfn: 1, type: [ 41.077804] class: 0x20000 device name: 0000:17:00.1 [ 41.077821] parse addresses (80 bytes) @ fffff800ff7879c0 [ 41.077837] start: ca20460000, end: ca2047ffff, i: 10 [ 41.077852] start: ca20480000, end: ca2049ffff, i: 14 [ 41.077867] start: c810003020, end: c81000303f, i: 18 [ 41.077882] start: ca204a0000, end: ca204bffff, i: 30 [ 41.077894] adding to system ... [ 41.077925] pci 0000:17:00.1: calling quirk_resource_alignment+0x0/0x1a4 [ 41.077993] pci 0000:17:00.1: PME# supported from D0 D3hot D3cold [ 41.078012] pci 0000:17:00.1: PME# disabled [ 41.078046] PCI: dev header type: 0 [ 41.095901] /amba@400: SUN4V AMBA Bus Module [ 41.095916] /amba@400: On NUMA node -1 [ 41.095928] /amba@400: Device Handle 0x400 [ 41.095944] /amba@400: AMBA MEM [0x8a00000000 ~ 0x8dffffffff] [ 41.095965] /amba@400: Virtual DMA [0x80000000 ~ 0xffffffff] [ 41.155908] /amba@400: Imported 4 IOTSB entries from OBP [ 41.155927] AMBA: Scanning PBM /amba@400 [ 41.155940] * /amba@400/sata@8 [ 41.155953] periphid: 0x8 [ 41.156054] mem space: 0x8b01000000 ~ 8b01001fff [ 41.156067] irq: 0x9 [ 41.156426] * /amba@400/sata@a [ 41.156440] periphid: 0xa [ 41.156510] mem space: 0x8c01000000 ~ 8c01001fff [ 41.156523] irq: 0xa [ 41.156758] * /amba@400/usb@d [ 41.156774] periphid: 0xd [ 41.156844] mem space: 0x8a00411000 ~ 8a004113ff [ 41.156857] irq: 0xb [ 41.157083] * /amba@400/usb@c [ 41.157098] periphid: 0xc [ 41.157173] mem space: 0x8a00410000 ~ 8a004103ff [ 41.157186] irq: 0xc [ 41.157413] * /amba@400/usb@f [ 41.157428] periphid: 0xf [ 41.157502] mem space: 0x8a00421000 ~ 8a004213ff [ 41.157515] irq: 0xd [ 41.157749] * /amba@400/usb@e [ 41.157764] periphid: 0xe [ 41.157838] mem space: 0x8a00420000 ~ 8a004203ff [ 41.157851] irq: 0xe [ 41.158078] * /amba@400/i2c@10 [ 41.158093] periphid: 0x10 [ 41.158167] mem space: 0x8a00400000 ~ 8a004003ff [ 41.158180] irq: 0xf [ 41.158407] * /amba@400/i2c@11 [ 41.158421] periphid: 0x11 [ 41.158496] mem space: 0x8a00400400 ~ 8a004007ff [ 41.158509] irq: 0x10 [ 41.158744] * /amba@400/i2c@12 [ 41.158759] periphid: 0x12 [ 41.158834] mem space: 0x8a00400800 ~ 8a00400bff [ 41.158847] irq: 0x11 [ 41.159077] * /amba@400/i2c@13 [ 41.159091] periphid: 0x13 [ 41.159167] mem space: 0x8a00400c00 ~ 8a00400fff [ 41.159180] irq: 0x12 [ 41.159410] * /amba@400/i2s@14 [ 41.159424] periphid: 0x14 [ 41.159500] mem space: 0x8a00401000 ~ 8a004013ff [ 41.159513] irq: 0x13 [ 41.159745] * /amba@400/i2s@15 [ 41.159763] periphid: 0x15 [ 41.159839] mem space: 0x8a00401400 ~ 8a004017ff [ 41.159852] irq: 0x14 [ 41.160093] * /amba@400/i2s@16 [ 41.160107] periphid: 0x16 [ 41.160184] mem space: 0x8a00401800 ~ 8a00401bff [ 41.160198] irq: 0x15 [ 41.160426] * /amba@400/i2s@17 [ 41.160440] periphid: 0x17 [ 41.160518] mem space: 0x8a00401c00 ~ 8a00401fff [ 41.160531] irq: 0x16 [ 41.160761] * /amba@400/console@18 [ 41.160776] periphid: 0x18 [ 41.160859] mem space: 0x8a00402000 ~ 8a004023ff [ 41.160872] irq: 0x17 [ 41.161103] * /amba@400/console@19 [ 41.161117] periphid: 0x19 [ 41.161196] mem space: 0x8a00402400 ~ 8a004027ff [ 41.161209] irq: 0x18 [ 41.161439] * /amba@400/gpio@1a [ 41.161453] periphid: 0x1a [ 41.161533] mem space: 0x8a00402800 ~ 8a00402bff [ 41.161546] irq: 0x19 [ 41.162037] * /amba@400/ictl@1b [ 41.162052] periphid: 0x1b [ 41.162132] mem space: 0x8a00402c00 ~ 8a00402fff [ 41.162145] irq: 0x1a [ 41.162375] * /amba@400/rtc@1c [ 41.162390] periphid: 0x1c [ 41.162471] mem space: 0x8a00403000 ~ 8a004033ff [ 41.162485] irq: 0x1b [ 41.162716] * /amba@400/watchdog@1d [ 41.162731] periphid: 0x1d [ 41.162812] mem space: 0x8a00403400 ~ 8a004037ff [ 41.162825] irq: 0x1c [ 41.187831] bio: create slab <bio-0> at 0 [ 41.192286] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 41.192440] vgaarb: loaded [ 41.192451] vgaarb: bridge control possible 0000:01:00.0 [ 41.193396] SCSI subsystem initialized [ 41.196468] libata version 3.00 loaded. [ 41.197521] usbcore: registered new interface driver usbfs [ 41.197755] usbcore: registered new interface driver hub [ 41.198064] usbcore: registered new device driver usb [ 41.200082] Switching to clocksource stick [ 41.217874] NET: Registered protocol family 2 [ 41.218412] IP route cache hash table entries: 131072 (order: 7, 1048576 bytes) [ 41.221009] TCP established hash table entries: 524288 (order: 10, 8388608 bytes) [ 41.250930] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes) [ 41.255596] TCP: Hash tables configured (established 524288 bind 65536) [ 41.255615] TCP reno registered [ 41.257623] NET: Registered protocol family 1 [ 41.257760] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.257803] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.257836] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.257865] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.257896] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.257925] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.257956] pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.257984] pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258015] pci 0000:03:01.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258044] pci 0000:03:01.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258075] pci 0000:03:04.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258104] pci 0000:03:04.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258135] pci 0000:03:05.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258163] pci 0000:03:05.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258194] pci 0000:03:06.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258223] pci 0000:03:06.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258254] pci 0000:03:07.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258283] pci 0000:03:07.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258315] pci 0000:03:08.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258344] pci 0000:03:08.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258378] pci 0000:03:09.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258407] pci 0000:03:09.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258437] pci 0000:03:0a.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258466] pci 0000:03:0a.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258496] pci 0000:03:02.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258525] pci 0000:03:02.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258557] pci 0000:04:00.0: calling quirk_e100_interrupt+0x0/0x1e8 [ 41.258583] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258611] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258643] pci 0000:04:00.1: calling quirk_e100_interrupt+0x0/0x1e8 [ 41.258668] pci 0000:04:00.1: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258696] pci 0000:04:00.1: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258727] pci 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258756] pci 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258787] pci 0000:05:00.1: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258815] pci 0000:05:00.1: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258846] pci 0000:06:01.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258875] pci 0000:06:01.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258905] pci 0000:06:03.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258934] pci 0000:06:03.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.258964] pci 0000:06:0a.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.258993] pci 0000:06:0a.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259024] pci 0000:06:0b.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259052] pci 0000:06:0b.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259083] pci 0000:06:0c.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259112] pci 0000:06:0c.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259143] pci 0000:06:0d.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259171] pci 0000:06:0d.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259202] pci 0000:06:0e.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259230] pci 0000:06:0e.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259261] pci 0000:06:0f.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259289] pci 0000:06:0f.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259320] pci 0000:06:02.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259349] pci 0000:06:02.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259385] pci 0000:0a:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259415] pci 0000:0a:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259458] pci 0000:0a:00.1: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259487] pci 0000:0a:00.1: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259522] pci 0000:0a:00.2: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259551] pci 0000:0a:00.2: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259588] pci 0000:0a:00.3: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259617] pci 0000:0a:00.3: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259652] pci 0000:0a:00.4: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259681] pci 0000:0a:00.4: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259719] pci 0000:0a:00.5: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259747] pci 0000:0a:00.5: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259782] pci 0000:0a:00.6: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259811] pci 0000:0a:00.6: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259849] pci 0000:0a:00.7: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259878] pci 0000:0a:00.7: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259912] pci 0000:10:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.259941] pci 0000:10:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.259972] pci 0000:11:08.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.260001] pci 0000:11:08.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.260033] pci 0000:17:00.0: calling quirk_e100_interrupt+0x0/0x1e8 [ 41.260058] pci 0000:17:00.0: calling quirk_cardbus_legacy+0x0/0x38 [ 41.260086] pci 0000:17:00.0: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.260119] pci 0000:17:00.1: calling quirk_e100_interrupt+0x0/0x1e8 [ 41.260143] pci 0000:17:00.1: calling quirk_cardbus_legacy+0x0/0x38 [ 41.260171] pci 0000:17:00.1: calling quirk_usb_early_handoff+0x0/0x5f0 [ 41.260541] Unpacking initramfs... [ 43.105650] Freeing initrd memory: 14241k freed [ 43.124732] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 43.128158] VFS: Disk quotas dquot_6.5.2 [ 43.128378] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) [ 43.128956] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 43.129318] msgmni has been set to 7935 [ 43.135109] alg: No test for stdrng (krng) [ 43.135431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 43.135454] io scheduler noop registered [ 43.135468] io scheduler anticipatory registered [ 43.135482] io scheduler deadline registered (default) [ 43.135521] io scheduler cfq registered [ 43.153792] f0298788: ttyS0 at I/O 0x0 (irq = 2) is a SUN4V HCONS [ 43.155022] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 43.166368] loop: module loaded [ 43.172343] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 43.172624] mpt2sas version 02.100.03.00 loaded [ 43.173155] osst :I: Tape driver with OnStream support version 0.99.4 [ 43.173166] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 43.173988] SCSI Media Changer driver v0.25 [ 43.177164] Fusion MPT base driver 3.04.12 [ 43.177176] Copyright (c) 1999-2008 LSI Corporation [ 43.177218] Fusion MPT SPI Host driver 3.04.12 [ 43.177472] Fusion MPT FC Host driver 3.04.12 [ 43.177751] Fusion MPT SAS Host driver 3.04.12 [ 43.178016] Fusion MPT misc device (ioctl) driver 3.04.12 [ 43.178257] mptctl: Registered with Fusion MPT base driver [ 43.178278] mptctl: /dev/mptctl @ (major,minor=10,220) [ 43.178530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 43.178629] PCI: Enabling device: (0000:0a:00.1), cmd 2 [ 43.178660] ehci_hcd 0000:0a:00.1: enabling bus mastering [ 43.178678] ehci_hcd 0000:0a:00.1: EHCI Host Controller [ 43.178718] ehci_hcd 0000:0a:00.1: new USB bus registered, assigned bus number 1 [ 43.178870] ehci_hcd 0000:0a:00.1: Enabling legacy PCI PM [ 43.215396] ehci_hcd 0000:0a:00.1: enabling Mem-Wr-Inval [ 43.215469] ehci_hcd 0000:0a:00.1: irq 8, io mem 0xca20302000 [ 43.233503] ehci_hcd 0000:0a:00.1: USB 2.0 started, EHCI 1.00 [ 43.233623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.233644] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.233663] usb usb1: Product: EHCI Host Controller [ 43.233679] usb usb1: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.233695] usb usb1: SerialNumber: 0000:0a:00.1 [ 43.234123] usb usb1: configuration #1 chosen from 1 choice [ 43.234443] hub 1-0:1.0: USB hub found [ 43.234494] hub 1-0:1.0: 1 port detected [ 43.234697] PCI: Enabling device: (0000:0a:00.3), cmd 2 [ 43.234722] ehci_hcd 0000:0a:00.3: enabling bus mastering [ 43.234739] ehci_hcd 0000:0a:00.3: EHCI Host Controller [ 43.234775] ehci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 2 [ 43.234919] ehci_hcd 0000:0a:00.3: Enabling legacy PCI PM [ 43.263503] ehci_hcd 0000:0a:00.3: enabling Mem-Wr-Inval [ 43.263563] ehci_hcd 0000:0a:00.3: irq 5, io mem 0xca20306000 [ 43.283512] ehci_hcd 0000:0a:00.3: USB 2.0 started, EHCI 1.00 [ 43.283604] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.283625] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.283643] usb usb2: Product: EHCI Host Controller [ 43.283659] usb usb2: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.283675] usb usb2: SerialNumber: 0000:0a:00.3 [ 43.284070] usb usb2: configuration #1 chosen from 1 choice [ 43.284395] hub 2-0:1.0: USB hub found [ 43.284440] hub 2-0:1.0: 1 port detected [ 43.284630] PCI: Enabling device: (0000:0a:00.5), cmd 2 [ 43.284655] ehci_hcd 0000:0a:00.5: enabling bus mastering [ 43.284672] ehci_hcd 0000:0a:00.5: EHCI Host Controller [ 43.284708] ehci_hcd 0000:0a:00.5: new USB bus registered, assigned bus number 3 [ 43.284845] ehci_hcd 0000:0a:00.5: Enabling legacy PCI PM [ 43.313504] ehci_hcd 0000:0a:00.5: enabling Mem-Wr-Inval [ 43.313571] ehci_hcd 0000:0a:00.5: irq 6, io mem 0xca2030a000 [ 43.333548] ehci_hcd 0000:0a:00.5: USB 2.0 started, EHCI 1.00 [ 43.333640] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.333661] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.333679] usb usb3: Product: EHCI Host Controller [ 43.333694] usb usb3: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.333710] usb usb3: SerialNumber: 0000:0a:00.5 [ 43.334103] usb usb3: configuration #1 chosen from 1 choice [ 43.334412] hub 3-0:1.0: USB hub found [ 43.334457] hub 3-0:1.0: 1 port detected [ 43.334654] PCI: Enabling device: (0000:0a:00.7), cmd 2 [ 43.334679] ehci_hcd 0000:0a:00.7: enabling bus mastering [ 43.334696] ehci_hcd 0000:0a:00.7: EHCI Host Controller [ 43.334731] ehci_hcd 0000:0a:00.7: new USB bus registered, assigned bus number 4 [ 43.334864] ehci_hcd 0000:0a:00.7: Enabling legacy PCI PM [ 43.363516] ehci_hcd 0000:0a:00.7: enabling Mem-Wr-Inval [ 43.363581] ehci_hcd 0000:0a:00.7: irq 7, io mem 0xca2030e000 [ 43.383536] ehci_hcd 0000:0a:00.7: USB 2.0 started, EHCI 1.00 [ 43.383635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.383657] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.383675] usb usb4: Product: EHCI Host Controller [ 43.383690] usb usb4: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.383706] usb usb4: SerialNumber: 0000:0a:00.7 [ 43.384114] usb usb4: configuration #1 chosen from 1 choice [ 43.384422] hub 4-0:1.0: USB hub found [ 43.384468] hub 4-0:1.0: 1 port detected [ 43.384890] ehci-amba usb@c: AMBA EHCI [ 43.384924] ehci-amba usb@c: new USB bus registered, assigned bus number 5 [ 43.385274] ehci-amba usb@c: irq 12, io mem 0x8a00410000 [ 43.403514] ehci-amba usb@c: USB 2.0 started, EHCI 1.00 [ 43.403602] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.403623] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.403641] usb usb5: Product: AMBA EHCI [ 43.403655] usb usb5: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.403671] usb usb5: SerialNumber: AMBA USB EHCI [ 43.404070] usb usb5: configuration #1 chosen from 1 choice [ 43.404371] hub 5-0:1.0: USB hub found [ 43.404416] hub 5-0:1.0: 2 ports detected [ 43.404594] ehci-amba usb@e: AMBA EHCI [ 43.404627] ehci-amba usb@e: new USB bus registered, assigned bus number 6 [ 43.405449] ehci-amba usb@e: irq 14, io mem 0x8a00420000 [ 43.423501] ehci-amba usb@e: USB 2.0 started, EHCI 1.00 [ 43.423589] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 43.423612] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.423632] usb usb6: Product: AMBA EHCI [ 43.423646] usb usb6: Manufacturer: Linux 2.6.32.20 ehci_hcd [ 43.423663] usb usb6: SerialNumber: AMBA USB EHCI [ 43.424111] usb usb6: configuration #1 chosen from 1 choice [ 43.424420] hub 6-0:1.0: USB hub found [ 43.424465] hub 6-0:1.0: 2 ports detected [ 43.424830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 43.424934] ohci_hcd 0000:0a:00.0: OHCI Host Controller [ 43.424977] ohci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 7 [ 43.425045] ohci_hcd 0000:0a:00.0: irq 8, io mem 0xca20300000 [ 43.487608] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.487630] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.487649] usb usb7: Product: OHCI Host Controller [ 43.487664] usb usb7: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.487680] usb usb7: SerialNumber: 0000:0a:00.0 [ 43.488086] usb usb7: configuration #1 chosen from 1 choice [ 43.488413] hub 7-0:1.0: USB hub found [ 43.488463] hub 7-0:1.0: 1 port detected [ 43.488678] ohci_hcd 0000:0a:00.2: OHCI Host Controller [ 43.488715] ohci_hcd 0000:0a:00.2: new USB bus registered, assigned bus number 8 [ 43.488780] ohci_hcd 0000:0a:00.2: irq 5, io mem 0xca20304000 [ 43.547593] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.547614] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.547633] usb usb8: Product: OHCI Host Controller [ 43.547648] usb usb8: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.547664] usb usb8: SerialNumber: 0000:0a:00.2 [ 43.548070] usb usb8: configuration #1 chosen from 1 choice [ 43.548388] hub 8-0:1.0: USB hub found [ 43.548442] hub 8-0:1.0: 1 port detected [ 43.548650] ohci_hcd 0000:0a:00.4: OHCI Host Controller [ 43.548687] ohci_hcd 0000:0a:00.4: new USB bus registered, assigned bus number 9 [ 43.548747] ohci_hcd 0000:0a:00.4: irq 6, io mem 0xca20308000 [ 43.607599] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.607624] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.607646] usb usb9: Product: OHCI Host Controller [ 43.607665] usb usb9: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.607684] usb usb9: SerialNumber: 0000:0a:00.4 [ 43.608148] usb usb9: configuration #1 chosen from 1 choice [ 43.608513] hub 9-0:1.0: USB hub found [ 43.608567] hub 9-0:1.0: 1 port detected [ 43.608810] ohci_hcd 0000:0a:00.6: OHCI Host Controller [ 43.608854] ohci_hcd 0000:0a:00.6: new USB bus registered, assigned bus number 10 [ 43.608924] ohci_hcd 0000:0a:00.6: irq 7, io mem 0xca2030c000 [ 43.667592] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.667613] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.667632] usb usb10: Product: OHCI Host Controller [ 43.667647] usb usb10: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.667663] usb usb10: SerialNumber: 0000:0a:00.6 [ 43.668082] usb usb10: configuration #1 chosen from 1 choice [ 43.668400] hub 10-0:1.0: USB hub found [ 43.668449] hub 10-0:1.0: 1 port detected [ 43.668847] ohci-amba usb@d: USB Host Controller [ 43.668882] ohci-amba usb@d: new USB bus registered, assigned bus number 11 [ 43.668947] ohci-amba usb@d: irq 11, io mem 0x8a00411000 [ 43.725574] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.725596] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.725617] usb usb11: Product: USB Host Controller [ 43.725634] usb usb11: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.725652] usb usb11: SerialNumber: AMBA USB OHCI [ 43.726044] usb usb11: configuration #1 chosen from 1 choice [ 43.726351] hub 11-0:1.0: USB hub found [ 43.726397] hub 11-0:1.0: 2 ports detected [ 43.726584] ohci-amba usb@f: USB Host Controller [ 43.726619] ohci-amba usb@f: new USB bus registered, assigned bus number 12 [ 43.726696] ohci-amba usb@f: irq 13, io mem 0x8a00421000 [ 43.785574] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001 [ 43.785596] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 43.785614] usb usb12: Product: USB Host Controller [ 43.785629] usb usb12: Manufacturer: Linux 2.6.32.20 ohci_hcd [ 43.785645] usb usb12: SerialNumber: AMBA USB OHCI [ 43.786037] usb usb12: configuration #1 chosen from 1 choice [ 43.786345] hub 12-0:1.0: USB hub found [ 43.786391] hub 12-0:1.0: 2 ports detected [ 43.786994] usbcore: registered new interface driver usblp [ 43.787512] mice: PS/2 mouse device common for all mice [ 43.789261] Linux video capture interface: v2.00 [ 43.790002] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 43.796264] usbcore: registered new interface driver hiddev [ 43.796520] usbcore: registered new interface driver usbhid [ 43.796541] usbhid: v2.6:USB HID core driver [ 43.796595] func:uart_amba_probe [ 43.796607] port.mapbase:592709689344 [ 43.796961] console@18: ttyS1 at MMIO 0x8a00402000 (irq = 23) is a 16550A [ 43.797257] amba-uart ttyAMBAS0 probed,irq:23,port.type:4 [ 43.797290] func:uart_amba_probe [ 43.797302] port.mapbase:592709690368 [ 43.797619] console@19: ttyS2 at MMIO 0x8a00402400 (irq = 24) is a 16550A [ 43.797905] amba-uart ttyAMBAS1 probed,irq:24,port.type:4 [ 43.801869] rtc-ds1307 3-0068: rtc core: registered ds1339 as rtc0 [ 43.806241] ahci-amba sata@8: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl amba mode [ 43.806274] ahci-amba sata@8: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst [ 43.806742] scsi0 : ahci [ 43.807449] scsi1 : ahci [ 43.808004] ata1: SATA max UDMA/133 mmio [0x8b01000000-0x8b01001fff] port 0x100 irq 9 [ 43.808027] ata2: SATA max UDMA/133 mmio [0x8b01000000-0x8b01001fff] port 0x180 irq 9 [ 43.812140] ahci-amba sata@a: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl amba mode [ 43.812172] ahci-amba sata@a: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst [ 43.812621] scsi2 : ahci [ 43.813289] scsi3 : ahci [ 43.813838] ata3: SATA max UDMA/133 mmio [0x8c01000000-0x8c01001fff] port 0x100 irq 10 [ 43.813861] ata4: SATA max UDMA/133 mmio [0x8c01000000-0x8c01001fff] port 0x180 irq 10 [ 43.814809] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 43.814826] ALSA device list: [ 43.814836] No soundcards found. [ 43.815699] IPVS: Registered protocols () [ 43.815766] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 43.816075] IPVS: ipvs loaded. [ 43.818358] TCP cubic registered [ 43.818375] NET: Registered protocol family 17 [ 43.824924] rtc-ds1307 3-0068: setting system clock to 2014-09-05 05:07:00 UTC (1409893620) [ 44.023522] usb 3-1: new high speed USB device using ehci_hcd and address 2 [ 44.163511] ata2: SATA link down (SStatus 0 SControl 310) [ 44.163563] ata1: SATA link down (SStatus 0 SControl 310) [ 44.165762] ata4: SATA link down (SStatus 0 SControl 310) [ 44.178540] usb 3-1: New USB device found, idVendor=13fe, idProduct=4100 [ 44.178561] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 44.178580] usb 3-1: Product: USB DISK 2.0 [ 44.178593] usb 3-1: Manufacturer: [ 44.178609] usb 3-1: SerialNumber: 070D2AF2D655E500 [ 44.179097] usb 3-1: configuration #1 chosen from 1 choice [ 44.343529] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 44.355059] ata3.00: ATA-8: KINGSTON SV300S37A60G, 505ABBF1, max UDMA/133 [ 44.355082] ata3.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 44.365101] ata3.00: configured for UDMA/133 [ 44.385663] scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5 [ 44.386785] sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 44.387087] sd 2:0:0:0: [sda] Write Protect is off [ 44.387108] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 44.387269] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 44.388123] sda: sda1 sda2 sda3 [ 44.390839] sd 2:0:0:0: [sda] Attached SCSI disk [ 44.471768] dracut: dracut-004-43.5.ft.ky3 [ 44.483535] usb 7-1: new low speed USB device using ohci_hcd and address 2 [ 44.527045] udev: starting version 145 [ 44.679541] usb 7-1: New USB device found, idVendor=0a81, idProduct=0205 [ 44.679567] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 44.679588] usb 7-1: Product: PS2 to USB Converter [ 44.679604] usb 7-1: Manufacturer: CHESEN [ 44.680251] usb 7-1: configuration #1 chosen from 1 choice [ 44.693737] input: CHESEN PS2 to USB Converter as /devices/root/f029cd34/pci0000:00/0000:00:01.0/0000:02:00.0/0000:03:04.0/0000:05:00.0/0000:06:0b.0/0000:0a:00.0/usb7/7-1/7-1:1.0/input/input0 [ 44.694183] generic-usb 0003:0A81:0205.0001: input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:0a:00.0-1/input0 [ 44.705801] input: CHESEN PS2 to USB Converter as /devices/root/f029cd34/pci0000:00/0000:00:01.0/0000:02:00.0/0000:03:04.0/0000:05:00.0/0000:06:0b.0/0000:0a:00.0/usb7/7-1/7-1:1.1/input/input1 [ 44.706493] generic-usb 0003:0A81:0205.0002: input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:0a:00.0-1/input1 [ 44.801853] [drm] Initialized drm 1.1.0 20060810 [ 44.844393] usb 11-1: new full speed USB device using ohci-amba and address 2 [ 45.026552] usb 11-1: New USB device found, idVendor=0d8c, idProduct=0105 [ 45.026577] usb 11-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 45.026596] usb 11-1: Product: USB Multimedia Audio Device [ 45.026612] usb 11-1: Manufacturer: C-Media Electronics Inc. [ 45.028735] usb 11-1: configuration #1 chosen from 1 choice [ 45.036290] input: C-Media Electronics Inc. USB Multimedia Audio Device as /devices/root/f02a56cc/usb@d/usb11/11-1/11-1:1.3/input/input2 [ 45.036717] generic-usb 0003:0D8C:0105.0003: input: USB HID v1.00 Device [C-Media Electronics Inc. USB Multimedia Audio Device] on usb-AMBA USB OHCI-1/input3 [ 45.074746] [drm] radeon defaulting to kernel modesetting. [ 45.074764] [drm] radeon kernel modesetting enabled. [ 45.075009] radeon 0000:01:00.0: enabling bus mastering [ 45.075931] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1002:0x0000). [ 45.075952] radeon: No suitable DMA available. [ 45.075965] [drm] register mmio base: 0x00200000 [ 45.075978] [drm] register mmio size: 131072 [ 47.870203] ATOM BIOS: Great [ 47.870342] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 47.870366] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [ 47.870385] [drm] Detected VRAM RAM=512M, BAR=256M [ 47.870398] [drm] RAM width 64bits DDR [ 47.870640] [TTM] Zone kernel: Available graphics memory: 2031676 kiB. [ 47.870659] [TTM] Initializing pool allocator. [ 47.870764] [drm] radeon: 512M of VRAM memory ready [ 47.870781] [drm] radeon: 512M of GTT memory ready. [ 47.870846] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 47.870862] [drm] Driver supports precise vblank timestamp query. [ 47.870953] radeon 0000:01:00.0: radeon: using MSI. [ 47.871044] [drm] radeon: irq initialized. [ 47.871076] [drm] GART: num cpu pages 65536, num gpu pages 131072 [ 47.872956] [drm] Loading CEDAR Microcode [ 47.872979] platform radeon_cp.0: firmware: requesting radeon/CEDAR_pfp.bin [ 47.886771] platform radeon_cp.0: firmware: requesting radeon/CEDAR_me.bin [ 47.900539] platform radeon_cp.0: firmware: requesting radeon/CEDAR_rlc.bin [ 47.924508] radeon 0000:01:00.0: WB enabled [ 47.941477] [drm] ring test succeeded in 0 usecs [ 47.942049] [drm] radeon: ib pool ready. [ 47.942372] [drm] ib test succeeded in 0 usecs [ 47.947370] [drm] Radeon Display Connectors [ 47.947385] [drm] Connector 0: [ 47.947396] [drm] DisplayPort [ 47.947406] [drm] HPD4 [ 47.947423] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 47.947438] [drm] Encoders: [ 47.947449] [drm] DFP1: INTERNAL_UNIPHY [ 47.947462] [drm] Connector 1: [ 47.947471] [drm] DVI-D [ 47.947481] [drm] HPD1 [ 47.947497] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 47.947511] [drm] Encoders: [ 47.947522] [drm] DFP2: INTERNAL_UNIPHY1 [ 47.947533] [drm] Connector 2: [ 47.947543] [drm] DVI-D [ 47.947552] [drm] HPD2 [ 47.947568] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 47.947583] [drm] Encoders: [ 47.947594] [drm] DFP3: INTERNAL_UNIPHY1 [ 47.947605] [drm] Connector 3: [ 47.947615] [drm] VGA [ 47.947631] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 47.947646] [drm] Encoders: [ 47.947656] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 47.958016] [drm] Radeon display connector DP-1: No monitor connected or invalid EDID [ 47.968364] [drm] Radeon display connector DVI-D-1: No monitor connected or invalid EDID [ 47.978740] [drm] Radeon display connector DVI-D-2: No monitor connected or invalid EDID [ 47.989126] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [ 47.989241] [drm] Internal thermal controller with fan control [ 47.989681] [drm] radeon: power management initialized [ 48.249075] [drm] fb mappable at 0xCA10142000 [ 48.
嵌入式2.6.32内核挂载根文件系统root.cramfs失败
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x00300000 ... done zImage magic = 0x016f2818 Setup linux parameters at 0x30000100 linux command line is: "noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttyS"MACH_TYPE = 193 NOW, Booting Linux...... Uncompressing Linux.............................................................Linux version 2.6.32.63 (rival@ubuntu) (gcc version 4.4.3 (ctng-1.6.1) ) #7 Sat4CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 CPU: VIVT data cache, VIVT instruction cache Machine: SMDK2410 ATAG_INITRD is deprecated; please update your bootloader. Memory policy: ECC disabled, Data cache writeback CPU S3C2410A (id 0x32410002) S3C24XX Clocks, (c) 2004 Simtec Electronics S3C2410: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySAC0sPID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 60664KB available (3708K code, 342K data, 156K init, 0K highmem) Hierarchical RCU implementation. NR_IRQS:99 irq: clearing pending ext status 00080000 irq: clearing subpending status 00000002 Console: colour dummy device 80x30 console [ttySAC0] enabled Calibrating delay loop... 99.53 BogoMIPS (lpj=248832) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 S3C Power Management, Copyright 2004 Simtec Electronics S3C2410: Initialising architecture S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4808000, irq 33 DMA channel 1 at c4808040, irq 34 DMA channel 2 at c4808080, irq 35 DMA channel 3 at c48080c0, irq 36 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb s3c-i2c s3c2410-i2c: slave address 0x10 s3c-i2c s3c2410-i2c: bus frequency set to 97 KHz s3c-i2c s3c2410-i2c: i2c-0: S3C I2C adapter NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (extended precision) JFFS2 version 2.2. (NAND) (SUMMARY) .. 2001-2006 Red Hat, Inc. ROMFS MTD (C) 2007 Red Hat, Inc. msgmni has been set to 118 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered s3c2410-lcd s3c2410-lcd: no platform data for lcd, cannot attach s3c2410-lcd: probe of s3c2410-lcd failed with error -22 lp: driver loaded but no devices found ppdev: user-space parallel port driver Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410 s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410 s3c2410-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410 brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c24xx-nand s3c2410-nand: Tacls=2, 20ns Twrph0=6 60ns, Twrph1=2 20ns s3c24xx-nand s3c2410-nand: NAND ECC disabled NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bi)NAND_ECC_NONE selected by board driver. This is not recommended !! Scanning device for bad blocks Bad eraseblock 633 at 0x0000009e4000 Bad eraseblock 1824 at 0x000001c80000 Creating 6 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x000000000000-0x000000020000 : "vivi" 0x000000020000-0x000000030000 : "param" 0x000000030000-0x000000330000 : "kernel" 0x000000330000-0x000000630000 : "root" 0x000000630000-0x000003d30000 : "yaffs" 0x000003d30000-0x000003dfc000 : "ucos" dm9000 Ethernet Driver, V1.31 usbmon: debugfs is not available ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new interface driver libusual usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver mice: PS/2 mouse device common for all mice S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled Advanced Linux Sound Architecture Driver Version 1.0.21. No device for DAI UDA134X No device for DAI s3c24xx-i2s ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time List of all partitions: 1f00 128 mtdblock0 (driver?) 1f01 64 mtdblock1 (driver?) 1f02 3072 mtdblock2 (driver?) 1f03 3072 mtdblock3 (driver?) 1f04 56320 mtdblock4 (driver?) 1f05 816 mtdblock5 (driver?) No filesystem could mount root, tried: cramfs Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3) Backtrace: [<c0033984>] (dump_backtrace+0x0/0x114) from [<c02f5a40>] (dump_stack+0x18/0x1c) r6:00008000 r5:c388b007 r4:c03f6ae4 [<c02f5a28>] (dump_stack+0x0/0x1c) from [<c02f5a90>] (panic+0x4c/0x11c) [<c02f5a44>] (panic+0x0/0x11c) from [<c00090fc>] (mount_block_root+0x1d8/0x218) r3:00000003 r2:80000000 r1:c381bf64 r0:c0372cc6 [<c0008f24>] (mount_block_root+0x0/0x218) from [<c0009200>] (mount_root+0xc4/0x)[<c000913c>] (mount_root+0x0/0xfc) from [<c00093a4>] (prepare_namespace+0x16c/0) r5:c0028829 r4:c03f6234 [<c0009238>] (prepare_namespace+0x0/0x1c0) from [<c0008630>] (kernel_init+0xe8/) r5:c0027104 r4:c03f6000 [<c0008548>] (kernel_init+0x0/0x120) from [<c005637c>] (do_exit+0x0/0x5dc) r5:00
爬虫福利二 之 妹子图网MM批量下载
爬虫福利一:27报网MM批量下载    点击 看了本文,相信大家对爬虫一定会产生强烈的兴趣,激励自己去学习爬虫,在这里提前祝:大家学有所成! 目标网站:妹子图网 环境:Python3.x 相关第三方模块:requests、beautifulsoup4 Re:各位在测试时只需要将代码里的变量 path 指定为你当前系统要保存的路径,使用 python xxx.py 或IDE运行即可。
Java学习的正确打开方式
在博主认为,对于入门级学习java的最佳学习方法莫过于视频+博客+书籍+总结,前三者博主将淋漓尽致地挥毫于这篇博客文章中,至于总结在于个人,实际上越到后面你会发现学习的最好方式就是阅读参考官方文档其次就是国内的书籍,博客次之,这又是一个层次了,这里暂时不提后面再谈。博主将为各位入门java保驾护航,各位只管冲鸭!!!上天是公平的,只要不辜负时间,时间自然不会辜负你。 何谓学习?博主所理解的学习,它
程序员必须掌握的核心算法有哪些?
由于我之前一直强调数据结构以及算法学习的重要性,所以就有一些读者经常问我,数据结构与算法应该要学习到哪个程度呢?,说实话,这个问题我不知道要怎么回答你,主要取决于你想学习到哪些程度,不过针对这个问题,我稍微总结一下我学过的算法知识点,以及我觉得值得学习的算法。这些算法与数据结构的学习大多数是零散的,并没有一本把他们全部覆盖的书籍。下面是我觉得值得学习的一些算法以及数据结构,当然,我也会整理一些看过
大学四年自学走来,这些私藏的实用工具/学习网站我贡献出来了
大学四年,看课本是不可能一直看课本的了,对于学习,特别是自学,善于搜索网上的一些资源来辅助,还是非常有必要的,下面我就把这几年私藏的各种资源,网站贡献出来给你们。主要有:电子书搜索、实用工具、在线视频学习网站、非视频学习网站、软件下载、面试/求职必备网站。 注意:文中提到的所有资源,文末我都给你整理好了,你们只管拿去,如果觉得不错,转发、分享就是最大的支持了。 一、PDF搜索网站推荐 对于大部
linux系列之常用运维命令整理笔录
本博客记录工作中需要的linux运维命令,大学时候开始接触linux,会一些基本操作,可是都没有整理起来,加上是做开发,不做运维,有些命令忘记了,所以现在整理成博客,当然vi,文件操作等就不介绍了,慢慢积累一些其它拓展的命令,博客不定时更新 顺便拉下票,我在参加csdn博客之星竞选,欢迎投票支持,每个QQ或者微信每天都可以投5票,扫二维码即可,http://m234140.nofollow.ax.
比特币原理详解
一、什么是比特币 比特币是一种电子货币,是一种基于密码学的货币,在2008年11月1日由中本聪发表比特币白皮书,文中提出了一种去中心化的电子记账系统,我们平时的电子现金是银行来记账,因为银行的背后是国家信用。去中心化电子记账系统是参与者共同记账。比特币可以防止主权危机、信用风险。其好处不多做赘述,这一层面介绍的文章很多,本文主要从更深层的技术原理角度进行介绍。 二、问题引入  假设现有4个人
程序员接私活怎样防止做完了不给钱?
首先跟大家说明一点,我们做 IT 类的外包开发,是非标品开发,所以很有可能在开发过程中会有这样那样的需求修改,而这种需求修改很容易造成扯皮,进而影响到费用支付,甚至出现做完了项目收不到钱的情况。 那么,怎么保证自己的薪酬安全呢? 我们在开工前,一定要做好一些证据方面的准备(也就是“讨薪”的理论依据),这其中最重要的就是需求文档和验收标准。一定要让需求方提供这两个文档资料作为开发的基础。之后开发
网页实现一个简单的音乐播放器(大佬别看。(⊙﹏⊙))
今天闲着无事,就想写点东西。然后听了下歌,就打算写个播放器。 于是乎用h5 audio的加上js简单的播放器完工了。 欢迎 改进 留言。 演示地点跳到演示地点 html代码如下`&lt;!DOCTYPE html&gt; &lt;html&gt; &lt;head&gt; &lt;title&gt;music&lt;/title&gt; &lt;meta charset="utf-8"&gt
Python十大装B语法
Python 是一种代表简单思想的语言,其语法相对简单,很容易上手。不过,如果就此小视 Python 语法的精妙和深邃,那就大错特错了。本文精心筛选了最能展现 Python 语法之精妙的十个知识点,并附上详细的实例代码。如能在实战中融会贯通、灵活使用,必将使代码更为精炼、高效,同时也会极大提升代码B格,使之看上去更老练,读起来更优雅。 1. for - else 什么?不是 if 和 else 才
数据库优化 - SQL优化
前面一篇文章从实例的角度进行数据库优化,通过配置一些参数让数据库性能达到最优。但是一些“不好”的SQL也会导致数据库查询变慢,影响业务流程。本文从SQL角度进行数据库优化,提升SQL运行效率。 判断问题SQL 判断SQL是否有问题时可以通过两个表象进行判断: 系统级别表象 CPU消耗严重 IO等待严重 页面响应时间过长
2019年11月中国大陆编程语言排行榜
2019年11月2日,我统计了某招聘网站,获得有效程序员招聘数据9万条。针对招聘信息,提取编程语言关键字,并统计如下: 编程语言比例 rank pl_ percentage 1 java 33.62% 2 c/c++ 16.42% 3 c_sharp 12.82% 4 javascript 12.31% 5 python 7.93% 6 go 7.25% 7
通俗易懂地给女朋友讲:线程池的内部原理
餐厅的约会 餐盘在灯光的照耀下格外晶莹洁白,女朋友拿起红酒杯轻轻地抿了一小口,对我说:“经常听你说线程池,到底线程池到底是个什么原理?”我楞了一下,心里想女朋友今天是怎么了,怎么突然问出这么专业的问题,但做为一个专业人士在女朋友面前也不能露怯啊,想了一下便说:“我先给你讲讲我前同事老王的故事吧!” 大龄程序员老王 老王是一个已经北漂十多年的程序员,岁数大了,加班加不动了,升迁也无望,于是拿着手里
经典算法(5)杨辉三角
写在前面: 我是 扬帆向海,这个昵称来源于我的名字以及女朋友的名字。我热爱技术、热爱开源、热爱编程。技术是开源的、知识是共享的。 这博客是对自己学习的一点点总结及记录,如果您对 Java、算法 感兴趣,可以关注我的动态,我们一起学习。 用知识改变命运,让我们的家人过上更好的生活。 目录一、杨辉三角的介绍二、杨辉三角的算法思想三、代码实现1.第一种写法2.第二种写法 一、杨辉三角的介绍 百度
腾讯算法面试题:64匹马8个跑道需要多少轮才能选出最快的四匹?
昨天,有网友私信我,说去阿里面试,彻底的被打击到了。问了为什么网上大量使用ThreadLocal的源码都会加上private static?他被难住了,因为他从来都没有考虑过这个问题。无独有偶,今天笔者又发现有网友吐槽了一道腾讯的面试题,我们一起来看看。 腾讯算法面试题:64匹马8个跑道需要多少轮才能选出最快的四匹? 在互联网职场论坛,一名程序员发帖求助到。二面腾讯,其中一个算法题:64匹
面试官:你连RESTful都不知道我怎么敢要你?
面试官:了解RESTful吗? 我:听说过。 面试官:那什么是RESTful? 我:就是用起来很规范,挺好的 面试官:是RESTful挺好的,还是自我感觉挺好的 我:都挺好的。 面试官:… 把门关上。 我:… 要干嘛?先关上再说。 面试官:我说出去把门关上。 我:what ?,夺门而去 文章目录01 前言02 RESTful的来源03 RESTful6大原则1. C-S架构2. 无状态3.统一的接
为啥国人偏爱Mybatis,而老外喜欢Hibernate/JPA呢?
关于SQL和ORM的争论,永远都不会终止,我也一直在思考这个问题。昨天又跟群里的小伙伴进行了一番讨论,感触还是有一些,于是就有了今天这篇文。 声明:本文不会下关于Mybatis和JPA两个持久层框架哪个更好这样的结论。只是摆事实,讲道理,所以,请各位看官勿喷。 一、事件起因 关于Mybatis和JPA孰优孰劣的问题,争论已经很多年了。一直也没有结论,毕竟每个人的喜好和习惯是大不相同的。我也看
SQL-小白最佳入门sql查询一
一 说明 如果是初学者,建议去网上寻找安装Mysql的文章安装,以及使用navicat连接数据库,以后的示例基本是使用mysql数据库管理系统; 二 准备前提 需要建立一张学生表,列分别是id,名称,年龄,学生信息;本示例中文章篇幅原因SQL注释略; 建表语句: CREATE TABLE `student` ( `id` int(11) NOT NULL AUTO_INCREMENT, `
项目中的if else太多了,该怎么重构?
介绍 最近跟着公司的大佬开发了一款IM系统,类似QQ和微信哈,就是聊天软件。我们有一部分业务逻辑是这样的 if (msgType = "文本") { // dosomething } else if(msgType = "图片") { // doshomething } else if(msgType = "视频") { // doshomething } else { // dosho
【图解经典算法题】如何用一行代码解决约瑟夫环问题
约瑟夫环问题算是很经典的题了,估计大家都听说过,然后我就在一次笔试中遇到了,下面我就用 3 种方法来详细讲解一下这道题,最后一种方法学了之后保证让你可以让你装逼。 问题描述:编号为 1-N 的 N 个士兵围坐在一起形成一个圆圈,从编号为 1 的士兵开始依次报数(1,2,3…这样依次报),数到 m 的 士兵会被杀死出列,之后的士兵再从 1 开始报数。直到最后剩下一士兵,求这个士兵的编号。 1、方
致 Python 初学者
文章目录1. 前言2. 明确学习目标,不急于求成,不好高骛远3. 在开始学习 Python 之前,你需要做一些准备2.1 Python 的各种发行版2.2 安装 Python2.3 选择一款趁手的开发工具3. 习惯使用IDLE,这是学习python最好的方式4. 严格遵从编码规范5. 代码的运行、调试5. 模块管理5.1 同时安装了py2/py35.2 使用Anaconda,或者通过IDE来安装模
“狗屁不通文章生成器”登顶GitHub热榜,分分钟写出万字形式主义大作
一、垃圾文字生成器介绍 最近在浏览GitHub的时候,发现了这样一个骨骼清奇的雷人项目,而且热度还特别高。 项目中文名:狗屁不通文章生成器 项目英文名:BullshitGenerator 根据作者的介绍,他是偶尔需要一些中文文字用于GUI开发时测试文本渲染,因此开发了这个废话生成器。但由于生成的废话实在是太过富于哲理,所以最近已经被小伙伴们给玩坏了。 他的文风可能是这样的: 你发现,
程序员:我终于知道post和get的区别
IT界知名的程序员曾说:对于那些月薪三万以下,自称IT工程师的码农们,其实我们从来没有把他们归为我们IT工程师的队伍。他们虽然总是以IT工程师自居,但只是他们一厢情愿罢了。 此话一出,不知激起了多少(码农)程序员的愤怒,却又无可奈何,于是码农问程序员。 码农:你知道get和post请求到底有什么区别? 程序员:你看这篇就知道了。 码农:你月薪三万了? 程序员:嗯。 码农:你是怎么做到的? 程序员:
《程序人生》系列-这个程序员只用了20行代码就拿了冠军
你知道的越多,你不知道的越多 点赞再看,养成习惯GitHub上已经开源https://github.com/JavaFamily,有一线大厂面试点脑图,欢迎Star和完善 前言 这一期不算《吊打面试官》系列的,所有没前言我直接开始。 絮叨 本来应该是没有这期的,看过我上期的小伙伴应该是知道的嘛,双十一比较忙嘛,要值班又要去帮忙拍摄年会的视频素材,还得搞个程序员一天的Vlog,还要写BU
加快推动区块链技术和产业创新发展,2019可信区块链峰会在京召开
      11月8日,由中国信息通信研究院、中国通信标准化协会、中国互联网协会、可信区块链推进计划联合主办,科技行者协办的2019可信区块链峰会将在北京悠唐皇冠假日酒店开幕。   区块链技术被认为是继蒸汽机、电力、互联网之后,下一代颠覆性的核心技术。如果说蒸汽机释放了人类的生产力,电力解决了人类基本的生活需求,互联网彻底改变了信息传递的方式,区块链作为构造信任的技术有重要的价值。   1
程序员把地府后台管理系统做出来了,还有3.0版本!12月7号最新消息:已在开发中有github地址
第一幕:缘起 听说阎王爷要做个生死簿后台管理系统,我们派去了一个程序员…… 996程序员做的梦: 第一场:团队招募 为了应对地府管理危机,阎王打算找“人”开发一套地府后台管理系统,于是就在地府总经办群中发了项目需求。 话说还是中国电信的信号好,地府都是满格,哈哈!!! 经常会有外行朋友问:看某网站做的不错,功能也简单,你帮忙做一下? 而这次,面对这样的需求,这个程序员
网易云6亿用户音乐推荐算法
网易云音乐是音乐爱好者的集聚地,云音乐推荐系统致力于通过 AI 算法的落地,实现用户千人千面的个性化推荐,为用户带来不一样的听歌体验。 本次分享重点介绍 AI 算法在音乐推荐中的应用实践,以及在算法落地过程中遇到的挑战和解决方案。 将从如下两个部分展开: AI 算法在音乐推荐中的应用 音乐场景下的 AI 思考 从 2013 年 4 月正式上线至今,网易云音乐平台持续提供着:乐屏社区、UGC
【技巧总结】位运算装逼指南
位算法的效率有多快我就不说,不信你可以去用 10 亿个数据模拟一下,今天给大家讲一讲位运算的一些经典例子。不过,最重要的不是看懂了这些例子就好,而是要在以后多去运用位运算这些技巧,当然,采用位运算,也是可以装逼的,不信,你往下看。我会从最简单的讲起,一道比一道难度递增,不过居然是讲技巧,那么也不会太难,相信你分分钟看懂。 判断奇偶数 判断一个数是基于还是偶数,相信很多人都做过,一般的做法的代码如下
日均350000亿接入量,腾讯TubeMQ性能超过Kafka
整理 | 夕颜出品 | AI科技大本营(ID:rgznai100) 【导读】近日,腾讯开源动作不断,相继开源了分布式消息中间件TubeMQ,基于最主流的 OpenJDK8开发的
8年经验面试官详解 Java 面试秘诀
    作者 | 胡书敏 责编 | 刘静 出品 | CSDN(ID:CSDNnews) 本人目前在一家知名外企担任架构师,而且最近八年来,在多家外企和互联网公司担任Java技术面试官,前后累计面试了有两三百位候选人。在本文里,就将结合本人的面试经验,针对Java初学者、Java初级开发和Java开发,给出若干准备简历和准备面试的建议。   Java程序员准备和投递简历的实
面试官如何考察你的思维方式?
1.两种思维方式在求职面试中,经常会考察这种问题:北京有多少量特斯拉汽车? 某胡同口的煎饼摊一年能卖出多少个煎饼? 深圳有多少个产品经理? 一辆公交车里能装下多少个乒乓球? 一
so easy! 10行代码写个"狗屁不通"文章生成器
前几天,GitHub 有个开源项目特别火,只要输入标题就可以生成一篇长长的文章。背后实现代码一定很复杂吧,里面一定有很多高深莫测的机器学习等复杂算法不过,当我看了源代码之后这程序不到50
知乎高赞:中国有什么拿得出手的开源软件产品?(整理自本人原创回答)
知乎高赞:中国有什么拿得出手的开源软件产品? 在知乎上,有个问题问“中国有什么拿得出手的开源软件产品(在 GitHub 等社区受欢迎度较好的)?” 事实上,还不少呢~ 本人于2019.7.6进行了较为全面的 回答 - Bravo Yeung,获得该问题下回答中得最高赞(236赞和1枚专业勋章),对这些受欢迎的 Github 开源项目分类整理如下: 分布式计算、云平台相关工具类 1.SkyWalk
MySQL数据库总结
文章目录一、数据库简介二、MySQL数据类型(5.5版本)三、Sql语句(1)Sql语句简介(2)数据定义语言DDLcreate,alter,drop(3)数据操纵语言DMLupdate,insert,delete(4)数据控制语言DCLgrant,revoke(5)数据查询语言DQLselect(6)分组查询与分页查询group by,limit四、完整性约束(单表)五、多表查询六、MySQL数
相关热词 c# 输入ip c# 乱码 报表 c#选择结构应用基本算法 c# 收到udp包后回包 c#oracle 头文件 c# 序列化对象 自定义 c# tcp 心跳 c# ice连接服务端 c# md5 解密 c# 文字导航控件
立即提问