Problem Description
One of the first users of BIT's new supercomputer was Chip Diller. He extended his exploration of powers of 3 to go from 0 to 333 and he explored taking various sums of those numbers.
`This supercomputer is great,'' remarked Chip.`I only wish Timothy were here to see these results.'' (Chip moved to a new apartment, once one became available on the third floor of the Lemon Sky apartments on Third Street.)

Input
The input will consist of at most 100 lines of text, each of which contains a single VeryLongInteger. Each VeryLongInteger will be 100 or fewer characters in length, and will only contain digits (no VeryLongInteger will be negative).

The final input line will contain a single zero on a line by itself.

Output
Your program should output the sum of the VeryLongIntegers given in the input.

This problem contains multiple test cases!

The first line of a multiple input is an integer N, then a blank line followed by N input blocks. Each input block is in the format indicated in the problem description. There is a blank line between input blocks.

The output format consists of N output blocks. There is a blank line between output blocks.

Sample Input
1

123456789012345678901234567890
123456789012345678901234567890
123456789012345678901234567890
0

Sample Output
370370367037037036703703703670

C语言编写的超长整数加法
。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。

c语言设计超长整数计算器

C语言是一种通用的程序设计语言,它包含了紧凑的表达式、丰富的运算符集合、现代控制流以及数据结构等四个部分.C语言功能丰富,表达能力强,使用起来灵活方便;它应用面广,可移植性强,同时具有高级语言和低级语言的优点,因此,在工程计算及应用程序开发中得到了广泛的应用.众所周知,对于C语言的初学者来说,最佳途径是编写程序,本文通过对一个典型实例的分析和讲解,来帮助读者掌握这门语言.

C语言 编写软件的思路

c 语言编写的学生信息查询的程序

C语言实现大数相乘（思路+代码+运行结果）

1.先将数字存放到一维数组中 2.从一维数组的下标为0开始和你输入的数字进行比较。 如果有则将下标输出；如果比较到最后一个都没有，则输出-1即可。 下面是所写的代码：        #include&amp;lt;stdio.h&amp;gt;        int main(void){        int n,i,m;       int a[1000];        scanf(&quot;%d&quot;,&amp;amp...
C语言编写的小程序，包含代码！
C语言编写的小程序，包含代码！，共初学者学习交流！

#include #define N 51 int add1(char first, char second){     int i=3;     if(first=='0' || first=='1' && second=='0' || second=='1'){         i = first + second - 2*'0';     }     return i; }

c语言查询程序
c语言查询程序

LRU的实现代码（C语言编写）

C语言实现整数逆序输出
C语言编程实现整数逆序输出，可在VC6.0环境下顺利实现
c语言实现整数计算机
C语言——整数型加减乘除计算机： 采用逆波兰表达式，栈，队列结合的方式求解： #include&amp;lt;stdio.h&amp;gt; #include&amp;lt;stdlib.h&amp;gt; #define MAXSIZE 100 typedef struct seqstack{ //栈定义 char data[MAXSIZE]; int top; }seqstack,*wstack; typedef stru...

c语言怎么去学习

#include <stdio.h> struct temp { int no; char c;//这里也可以是其他数据结构，比如数组之类的 }; int main() { int ch[10000],i,j,t,n; temp sh[10000]; printf("请输入你要录入数据的总数：\n"); scanf("%d",&n); printf("请依次数据你要录入的数据：\n"); for(i=0;i<n;i++) { scanf(" %c",&sh[i].c); sh[i].no=i+1; } printf("请输入你想要的序列：\n"); for(i=0;i<n;i++) scanf("%d",&ch[i]); for(i=0;i<n;i++) { for(j=0;j<n;j++) if(sh[j].no==ch[i]) printf("%c ",sh[j].c); } printf("\n"); return 0; } 思路就是这样的，用结构体的方法，其他你要有什么需求的话，自己改改就可以了

TIM_CTL EQU 203HrnTIMER0 EQU 200HrnTIMER1 EQU 201HrnMODE03 EQU 36HrnMODE12 EQU 74HrnrnINTA00 EQU 20HrnINTA01 EQU 21HrnPORTSEG EQU 211HrnPORTBIT EQU 210HrnrnSTACK SEGMENT STACKrnSTA DW 512 DUP (?)rnTOP EQU LENGTH STArnSTACK ENDSrn rnDATA SEGMENTrnMIN1 DB 0rnMIN2 DB 0rnGAP1 DB 10rnGAP2 DB 10rnSEC1 DB 0rnSEC2 DB 0rnINTMASK DB ?rnCSREG DW ?rnIPREG DW ?rnCOUNT DB 0rnLED DB 3FH,06,5BH,4FH,66H,6DH,7DH,07,7FH,6FH,40HrnMES DB 'DISPLAY THE LEDS,PRESS ANY KEY TO DOS!'rn DB 0AH,0DH,'\$'rnDATA ENDSrn rnCODE SEGMENTrn ASSUME CS:CODE,DS:DATA,SS:STACKrnrnSTART: PUSH DSrn MOV AX,0rn PUSH AXrn MOV AX,DATArn MOV DS,AXrn CLIrn MOV DX,TIM_CTLrn MOV AL,MODE03rn OUT DX,ALrn MOV DX,TIMER0rn MOV AL,00hrn OUT DX,ALrn MOV AL,02Hrn OUT DX,ALrn MOV DX,TIM_CTLrn MOV AL,MODE12rn OUT DX,ALrn MOV DX,TIMER1rn MOV AL,0aHrn OUT DX,ALrn MOV AL,00rn OUT DX,ALrn rn MOV AX,STACKrn MOV SS,AXrn MOV SP,TOPrn MOV AX,DATArn MOV DS,AXrn MOV DX,OFFSET MESrn MOV AH,09rn INT 21Hrn MOV AX,350AHrn INT 21Hrn MOV AX,ESrn MOV CSREG,AXrn MOV IPREG,BXrn PUSH BXrn PUSH DSrn MOV AX,CSrn MOV DS,AXrn MOV DX,OFFSET INT_PROCrn MOV AX,250AHrn INT 21Hrn POP DSrn MOV DX,INTA01rn IN AL,DXrn MOV INTMASK,ALrn AND AL,0FBHrn OUT DX,ALrnAGAIN: IN AL,21Hrn OR AL,04Hrn OUT 21H,ALrn STIrn MOV AH,01rn INT 16Hrn PUSHFrn IN AL,21Hrn AND AL,0FBHrn OUT 21H,ALrn POPFrn JZ AGAINrn CLIrn POP BXrn MOV DX,INTA01rn MOV AL,INTMASKrn OUT DX,ALrn MOV DX,IPREGrn MOV AX,CSREGrn MOV DS,AXrn MOV AX,250AHrn INT 21Hrn STIrn MOV AX,4C00Hrn INT 21Hrn rnINT_PROC:PUSH AXrn PUSH CXrn PUSH DXrn PUSH DIrn MOV AX,DATArn MOV DS,AXrn MOV DI,OFFSET MIN1rn MOV CL,01rnDIS1: MOV AL,[DI]rn MOV BX,OFFSET LEDrn XLATrn MOV DX,PORTSEGrn OUT DX,ALrn MOV AL,CLrn MOV DX,PORTBITrn OUT DX,ALrn PUSH CXrn MOV CX,350HrnDELAY: LOOP DELAYrn POP CXrn CMP CL,20H rn JZ CHGrn INC DIrn SHL CL,1 rn MOV AL,00rn OUT DX,ALrn JMP DIS1rnCHG: INC COUNT rn CMP COUNT,50rn JL QUITrn MOV COUNT,0rn INC SEC2rn CMP SEC2,10rn JL QUITrn MOV SEC2,0rn INC SEC1rn CMP SEC1,6rn JL QUITrn MOV SEC1,0rn INC MIN2rn CMP MIN2,10rn JL QUITrn MOV MIN2,0rn INC MIN1rn CMP MIN1,6rn JL QUITrn MOV MIN1,0rnQUIT: MOV DX,PORTBITrn MOV AL,00rn OUT DX,ALrn MOV DX,INTA00rn MOV AL,20Hrn OUT DX,ALrn POP DIrn POP DXrn POP CXrn POP AXrn IRETrnCODE ENDSrnEND STARTrn一个定时显示装置，用六个数码管显示时间，这个程序用C语言如何编写？谢谢! rn rnrn rn

C语言，多级菜单实现思路

C语言编写函数的方法

c语言头文件编写方法

Problem Description There is an undirected graph G with n vertices and m edges. Every time, you can select several edges and delete them. The edges selected must meet the following condition: let G′ be graph induced from these edges, then every connected component of G′ has at most one cycle. What is the minimum number of deletion needed in order to delete all the edges. Input There are multiple test cases. The first line of input contains an integer T indicating the number of test cases. For each test case: The first line contains two integers n and m (1≤n≤2000,0≤m≤2000) -- the number of vertices and the number of edges. For the next m lines, each line contains two integers ui and vi, which means there is an undirected edge between ui and vi (1≤ui,vi≤n,ui≠vi). The sum of values of n in all test cases doesn't exceed 2⋅104. The sum of values of m in all test cases doesn't exceed 2⋅104. Output For each test case, output the minimum number of deletion needed.
C语言俄罗斯防块代码
C语言俄罗斯防块代码

c语言编写学生管理系统（代码）
1、定义结构体，创建链表 struct xsnode { 　　int xh; 　　char xm[15]; 　　int gs; 　　int yy; 　　int wl; 　　float pj; 　　int mc; 　　struct xsnode *next; }; 2、根据以上链表结点结构，实现以下功能 a、三门课程名称的录入，学生学号、姓名的录入、显示； b、各学生记录数据的文件保存与读取； c、按学号查询记录，查询指定记录的修改、删除；（选作） d、平均成绩计算，按平均成绩排序，按单科成绩排序；（选作）